Producte acabatview
This document provides essential information for the proper use and maintenance of the Electron Microscopy Sciences Activated Carbon Filter, Model TP1050. This filter is designed to effectively absorb a wide range of organic and inorganic vapors in laboratory environments.
Figura 1: The Electron Microscopy Sciences Activated Carbon Filter, Model TP1050. This image shows the rectangular filter unit with a grid-like top surface, indicating the filtration area. The filter is black with white grid lines on top.
Característiques clau
- Contains high-grade activated carbon for efficient vapor absorption.
- Effective against a broad spectrum of organic and inorganic vapors, including xylene, formalin, methanol, toluene, and isopropyl alcohol.
- Designed for use with tissue processors, specifically compatible with the Leica TP1020 for formaldehyde applications.
Configuració i instal·lació
The Activated Carbon Filter TP1050 is intended for integration into compatible laboratory equipment. Follow the specific instructions provided by the manufacturer of your tissue processor for proper installation.
- Identify the filter compartment within your tissue processor (e.g., Leica TP1020).
- Ensure the equipment is powered off and disconnected from the main power supply before proceeding.
- Carefully remove the old filter, if present, following the equipment manufacturer's guidelines for safe disposal of hazardous waste.
- Insert the new Electron Microscopy Sciences Activated Carbon Filter TP1050 into the designated compartment, ensuring it is seated correctly and securely.
- Close the filter compartment and secure any latches or covers.
- Reconnect the equipment to power and power it on.
Nota: Refer to your specific tissue processor's user manual for detailed, model-specific installation procedures.
Instruccions de funcionament
The activated carbon filter operates passively within the tissue processor's ventilation system. No direct user interaction is required for its operation once installed.
- Ensure the tissue processor's ventilation system is functioning correctly as per its operational manual.
- The filter continuously absorbs vapors during the equipment's operation.
Manteniment
Regular replacement of the activated carbon filter is crucial for maintaining effective vapor absorption and ensuring a safe laboratory environment.
- Interval de substitució: The Activated Carbon Filter TP1050 should be replaced every 3 mesos en condicions normals de funcionament.
- Signs of Saturation: If a noticeable odor of chemicals becomes present in the laboratory despite the filter's presence, it indicates that the filter may be saturated and requires immediate replacement, regardless of the 3-month interval.
- Eliminació: Dispose of used filters according to local regulations for hazardous waste, as they will contain absorbed chemical vapors.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Chemical odors present in the lab. | Filter is saturated or improperly installed. | Replace the filter. Ensure proper installation as per the "Setup and Installation" section. Check the tissue processor's ventilation system. |
| Filter does not fit into equipment. | Incorrect filter model or incompatible equipment. | Verify that the filter model (TP1050) is compatible with your specific tissue processor (e.g., Leica TP1020). Contact your supplier if unsure. |
Especificacions
| Atribut | Detall |
|---|---|
| Nom del producte | Filtre de carbó actiu |
| Número de model | TP1050 |
| Fabricant | Electron Microscopy Sciences (EMS) |
| Número de peça del fabricant | 62654-03 |
| Compatibilitat | Tissue Processor TP1020 (for formaldehyde) |
| Substitució recomanada | Cada 3 mesos |
| Funció primària | Absorption of organic and inorganic vapors (e.g., xylene, formalin, methanol, toluene, isopropyl alcohol) |
Garantia i Suport
For specific warranty information and technical support regarding the Activated Carbon Filter TP1050, please contact Electron Microscopy Sciences (EMS) directly or your authorized distributor.
Manufacturer: EMS
Consulteu el servei oficial del fabricant weblloc web o l'embalatge del producte per obtenir les dades de contacte i els termes de garantia més actualitzats.
