TICCI T8VB Vibrating Alarm Watch User Manual

Introducció

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Informació de seguretat

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• No intenteu obrir el rellotge casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Producte acabatview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

Figura 1: Frontal view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Botó A: Mode Selection / Backlight
Botó B: Set / Adjust Up
Botó C: Adjust Down / Start/Stop (Stopwatch/Countdown)
Botó D: Bloquejar/Desbloquejar

Configuració

1. Engegada inicial / Bateria

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Configuració de l'hora i la data

1. From the Time Mode display, press and hold Botó B for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. Premeu Botó A to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Ús Botó B to increase the flashing value and Botó C per disminuir-lo.
4. Un cop ajustats tots els paràmetres, premeu Botó B de nou per sortir del mode de configuració.
5. To switch between 12-hour and 24-hour format, press Botó C while the hour digits are flashing during time setting.

Instruccions de funcionament

1. Selecció de mode

Premeu Botó A repeatedly to cycle through the different modes:

• Mode horari: Mostra l'hora, la data i el dia de la setmana actuals.
• Mode d'alarma: Allows setting and managing up to 8 individual alarms.
• Mode de cronòmetre: Per a esdeveniments de cronometratge.
• Mode de compte enrere: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Entra Mode d'alarma prement Botó A until "AL" appears on the display.
2. Mantén premut Botó B for approximately 2 seconds until the alarm number (1-8) flashes.
3. Ús Botó A to select the alarm you wish to set (A1, A2, A3, etc.).
4. Premeu Botó B to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Ús Botó B per ajustar l'hora i Botó C per ajustar el minut.
6. Després de configurar l'hora, premeu Botó A to select the alarm type:
   • TOTS DOS: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. Premeu Botó B to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use Botó A to select the alarm, then press Botó C to toggle its status.

3. Temporitzador de compte enrere

The countdown timer can be set from 15 minutes up to 24 hours.

1. Entra Mode de compte enrere prement Botó A until "TR" appears on the display.
2. Mantén premut Botó B for approximately 2 seconds until the hour digits flash.
3. Ús Botó B per ajustar l'hora i Botó C to adjust the minute for the countdown duration.
4. Premeu Botó B to save the countdown setting.
5. Premeu Botó C per iniciar o aturar el compte enrere.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Cronòmetre

1. Entra Mode de cronòmetre prement Botó A until "ST" appears on the display.
2. Premeu Botó C per iniciar el cronòmetre.
3. Premeu Botó C de nou per pausar el cronòmetre.
4. Mentre està en pausa, premeu Botó B per posar el cronòmetre a zero.

5. Llum de fons

Premeu Botó A briefly in any mode to activate the super bright EL backlight for easy viewen condicions de poca llum.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• A Bloqueig the watch: Press and hold Botó B i Botó C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• A Desbloqueja the watch: Press and hold Botó B i Botó C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Manteniment

1. Resistència a l'aigua

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is no recomanable for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Neteja

Clean the watch and strap regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or seals.

3. Substitució de la bateria

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Resolució de problemes

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Els botons no responen: The watch may be in lockout mode. Press and hold Botó B i Botó C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Aigua dins del rellotge: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Especificacions

Figure 4: Watch dimensions.

Garantia i Suport

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI weblloc.