Introducció
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your EUGAD 2-Tier Rabbit and Small Animal Enclosure. Designed for small animals such as guinea pigs, hamsters, chinchillas, rabbits, kittens, and puppies, this modular playpen offers a customizable and secure indoor environment. Please read this manual thoroughly before assembly and use to ensure proper setup and safety.
Informació de seguretat
- Només per a ús interior: This enclosure is designed for indoor use. Exposure to direct sunlight and rain outdoors can accelerate rust on metal parts and shorten the product's lifespan.
- Muntatge segur: Ensure all panels are firmly connected using the provided connectors and cable ties to maintain structural integrity and prevent collapse.
- Col·locació estable: Always place the enclosure on a flat, stable surface. Use the anti-slip pads to enhance stability.
- Supervisió d'animals de companyia: While the enclosure provides a secure space, always supervise your pets, especially during initial use, to ensure they are comfortable and cannot escape.
- Inspecció periòdica: Periodically check all connections and panels for wear or damage. Replace any damaged parts immediately.
- Ventilació: Ensure adequate ventilation within the enclosure.
Contingut del paquet
Abans de començar el muntatge, comproveu que tots els components que s'enumeren a continuació siguin presents i no estiguin danyats.
Imatge: Acabatview of all included parts for the enclosure.
| Component | Quantitat | Descripció |
|---|---|---|
| PP Panels | 10 PCS | Solid polypropylene panels, 35x35 cm. |
| Wire Grid Panels | 9 PCS | Metal wire grid panels, 35x35 cm. |
| Wire Grid Panel with Door | 1 PC | Metal wire grid panel with an integrated door, 35x35 cm. |
| Connectors | 30 PCS | Multi-angle connectors for joining panels. |
| Coixinets antilliscants | 12 PCS | Pads to prevent slipping and protect floors. |
| Brides de cable | 30 PCS | For reinforcing panel connections. |
| Mallet | 1 PC | Tool for securing panels into connectors. |
Instruccions de configuració
Follow these steps carefully to assemble your EUGAD enclosure. The modular design allows for various configurations to suit your space and pet's needs.
Step 1: Prepare Anti-slip Pads
Attach the anti-slip pads to the bottom of the connectors that will be placed on the floor. This prevents the enclosure from sliding and protects your flooring.
Imatge: Detailed steps for attaching anti-slip pads and connecting panels.
- Peel off the protective film from the anti-slip pad (Image 1).
- Adhere the anti-slip pad to the designated circular area on the bottom of a connector (Image 2).
- Repeat for all connectors that will form the base of your enclosure.
Step 2: Assemble the Base Layer
Begin by connecting the wire grid panels to form the desired shape for the base of your enclosure. Use the connectors to join the panels at the corners.
- Insert the corners of the panels firmly into the slots of the connectors (Image 3 & 4 from above).
- Use the provided mallet to gently tap the panels into the connectors, ensuring a snug and secure fit.
- Incorporate the wire grid panel with the door at your desired access point.
Step 3: Add the Second Tier (Optional)
To create a 2-tier structure, place additional connectors on top of the first layer's panels and begin assembling the second layer using the PP panels.
Imatge: Examples of different enclosure configurations and overall dimensions (107cm x 72cm x 72cm).
- Place connectors on the top edges of the base layer panels where the second tier will begin.
- Connect the PP panels to these connectors to form the upper level.
- You can create platforms or additional enclosed spaces on the second tier as needed.
Imatge: Example of a customized two-tier enclosure with an internal ramp o plataforma.
Step 4: Reinforce Connections with Cable Ties
For enhanced stability and security, use the provided cable ties to reinforce the connections between adjacent panels.
Imatge: Close-up of a cable tie reinforcing a panel connection.
- Thread a cable tie through the gaps of two adjoining panels near a connector.
- Pull the cable tie tight to secure the panels together.
- Trim any excess cable tie length.
Instruccions de funcionament
Using your EUGAD enclosure is straightforward once assembled.
- Porta d'accés: The enclosure includes one wire grid panel with an integrated door. This door is secured with a latch mechanism. To open, lift the latch and swing the door open. To close, swing the door shut and ensure the latch is securely engaged.
- Personalització: The modular design allows you to reconfigure the enclosure as needed. You can change the layout of the panels, add a roof (using additional panels), or create internal levels to expand the activity area for your pet.
- Col·locació: Position the enclosure in a safe, indoor area away from direct sunlight, drafts, and heat sources.
Imatge: The enclosure set up in a room, demonstrating its use for small pets.
Manteniment
Regular cleaning and maintenance will ensure the longevity and hygiene of your pet's enclosure.
- Neteja de panells: The PP panels are waterproof and easy to clean. Wipe them down regularly with a damp cloth and mild, pet-safe detergent. Rinse thoroughly and dry before reassembly or allowing pets back in.
- Wire Grids: Clean wire grids with a brush to remove debris, then wipe with a damp cloth. Ensure they are dry to prevent rust.
- Neteja profunda: For a more thorough cleaning, the enclosure can be disassembled. Clean each panel individually and allow them to air dry completely.
- Inspecció: Periodically inspect all connectors, panels, and cable ties for any signs of wear, cracks, or damage. Replace any compromised parts to maintain the enclosure's safety and integrity.
Imatge: Demonstration of cleaning the enclosure panels.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La carcassa sembla inestable o inestable. | Panels not fully inserted into connectors; insufficient cable ties; uneven surface. | Ensure all panel corners are fully seated in connectors using the mallet. Add more cable ties to reinforce connections. Place the enclosure on a flat, level surface. Verify anti-slip pads are correctly applied. |
| Panels are difficult to connect. | Misalignment; new connectors can be stiff. | Ensure panels are aligned correctly with connector slots. Apply firm, even pressure. Use the mallet to gently tap panels into place. |
| Pet is attempting to climb or jump out. | Enclosure height is insufficient for the pet; pet is highly active. | Consider adding a roof using additional panels to prevent escape. Ensure the enclosure height (70cm) is appropriate for your pet's jumping ability. |
| La porta no tanca bé. | Latch is bent or misaligned; panel connection near door is loose. | Check the latch mechanism for any bends and gently adjust if possible. Ensure the panels around the door are securely connected and reinforced with cable ties. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 0006WL |
| Dimensions (L x A x A) | 107 x 72 x 72 cm (Approximate assembled size) |
| Pes | 4.9 kg |
| Color | Gris |
| Material | Polypropylene (PP), Metal, Acrylonitrile Butadiene Styrene (ABS) Plastic |
| Tipus de tancament | Latch (on door panel) |
| Muntatge obligatori | Sí |
| Ús previst | Indoor enclosure for small animals (e.g., guinea pigs, hamsters, chinchillas, rabbits, kittens, puppies) |
Garantia i Suport
For information regarding warranty coverage, returns, or technical support, please refer to the specific terms and conditions provided by the retailer or manufacturer at the time of purchase. You may also visit the official EUGAD brand store on Amazon for further assistance and product information.
EUGAD Brand Store: Visit EUGAD Store
