Manual d'instruccions del suport de paret inclinable per a TV PERLESMITH

Informació important de seguretat

Please read all instructions carefully before installation and use. Improper installation or use may result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Capacitat de pes: Do not exceed the maximum load capacity of 60kg (132 lbs). This mount is designed for TVs between 37 and 75 inches.
• Tipus de paret: This mount is designed for installation on wood stud walls, solid concrete walls, or brick walls. Do not install on drywall alone.
• Certificació de seguretat UL: PERLESMITH wall mounts are tested to 4 times their maximum load capacity according to American UL safety standards, ensuring durability and earthquake resistance.
• Nens i animals de companyia: Securing your TV to the wall is the best way to prevent tip-over, protecting children and pets from potential injury.

Llista de verificació prèvia a la instal·lació

Before you begin installation, please verify the following:

• Mida del televisor: Your TV should be between 37 and 75 inches.
• Pes del televisor: The combined weight of your TV and any accessories must not exceed 60kg (132 lbs).
• Compatibilitat VESA: Check the VESA mounting pattern on the back of your TV. This mount supports VESA patterns from 200x100mm up to 600x400mm.
• Tipus de paret: Confirm your wall is a wood stud, concrete, or brick wall.
• TV Back Profile: If your TV has an uneven back surface, use the included spacers to create a flat mounting area and facilitate cable management.

Guia d'instal·lació

The PERLESMITH TV wall mount is designed for easy installation. Follow these steps for a secure setup.

Pas 1: comproveu el contingut del paquet

Unpack all components and verify that all parts are present according to the included parts list. If any parts are missing or damaged, please contact customer support.

Pas 2: connecteu els suports al televisor

Carefully place your TV face down on a soft, clean surface. Attach the vertical TV brackets to the back of your TV using the appropriate screws and spacers (if needed) that match your TV's VESA pattern. Ensure the brackets are securely fastened and level.

Pas 3: Munteu la placa de paret

Determine the desired height for your TV. Using a stud finder, locate the wood studs in your wall (for wood stud installation) or mark the drilling points for concrete/brick walls. Drill pilot holes and securely fasten the wall plate to the wall using the provided lag bolts and washers. Ensure the wall plate is perfectly level.

Pas 4: Pengeu el televisor a la placa de paret

With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is properly seated and centered on the wall plate.

Step 5: Secure TV and Adjust Tilt

Once the TV is hung, engage the security locks on the bottom of the TV brackets to prevent accidental dislodgement. This mount features a convenient wire release system for tilt adjustment. Pull the release wires to adjust the TV's downward tilt angle (up to 7 degrees) for optimal viewing. Release the wires to lock the tilt in place.

Instruccions de funcionament

This PERLESMITH wall mount allows for easy tilt adjustment to optimize your viewexperiència.

Ajust de l'angle d'inclinació

To adjust the tilt angle, simply pull the wire release cords located at the bottom of the TV brackets. This will disengage the tilt lock, allowing you to manually adjust the TV's angle downwards by up to 7 degrees. Once the desired angle is achieved, release the cords to re-engage the lock. The tilt range may vary slightly depending on your TV size.

Manteniment

Un manteniment regular ajuda a garantir la longevitat i el funcionament segur del suport de paret per a televisors.

• Neteja: Netegeu el suport amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Comprovacions periòdiques: Periodically check all screws and connections to ensure they are tight and secure. Over time, vibrations or movement may cause fasteners to loosen.
• Gestió de cables: Utilize the included cable holders to keep wiring neat and organized, preventing strain on cables and ports.

Resolució de problemes

Si teniu algun problema durant o després de la instal·lació, consulteu els següents problemes i solucions habituals:

• El televisor no està anivellat: Ensure the wall plate was installed level. If the wall plate is level, check if the TV brackets are properly aligned on the TV. Minor adjustments can sometimes be made by slightly loosening and re-tightening the bracket screws on the TV.
• Difficulty tilting the TV: Ensure the wire release cords are fully pulled to disengage the tilt lock. Check for any obstructions behind the TV that might be preventing movement.
• Peces que falten o components danyats: No continueu amb la instal·lació. Poseu-vos en contacte amb el servei d'atenció al client de PERLESMITH immediatament per obtenir peces de recanvi.
• La televisió sembla inestable: Double-check all wall plate and TV bracket connections. Ensure all screws are tightened securely. Verify that the wall type is appropriate and that the mount is installed into studs or solid concrete/brick.

Especificacions

Garantia i Suport

PERLESMITH stands behind the quality of its products.

• Garantia de qualitat d'3 any: All PERLESMITH products come with a three-year quality guarantee service from the date of purchase.
• Atenció al client: If you have any questions, concerns, or require assistance with assembly, missing parts, or product issues, please do not hesitate to contact our customer support team. We are committed to providing prompt and helpful service.