1. Introducció
The ANYCUBIC Wash and Cure 3.0 is an upgraded 2-in-1 wash and cure station designed for resin 3D printer models. It features a larger cleaning capacity, innovative gooseneck lights for uniform curing, a dual-layer design for IPA saving, and quiet, simple operation. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Instruccions de seguretat
- Always wear protective gloves and eye protection when handling resin or cleaning solutions.
- Ensure adequate ventilation in your workspace to avoid inhaling resin fumes.
- Mantingueu el dispositiu allunyat dels nens i de les mascotes.
- No exposeu el dispositiu a la llum solar directa ni a altes temperatures.
- Use only recommended cleaning solutions (e.g., Isopropyl Alcohol - IPA) and follow their safety guidelines.
- Never operate the curing function without the UV-blocking top cover in place.
- Desconnecteu l'alimentació abans de netejar o realitzar tasques de manteniment.
3. Què hi ha a la caixa
Upon unboxing your ANYCUBIC Wash and Cure 3.0, please verify that all components are present:
- Wash and Cure Machine Unit
- Washing Bucket (4L capacity)
- Cistella de rentat
- Rack Bar (4 pcs)
- Curing Table
- Llum de coll de cisne
- Conjunt de claus hexagonals
- Manual d'usuari
- Adaptador d'alimentació
Figura 3.1: All components included in the ANYCUBIC Wash and Cure 3.0 package.
4. Guia de configuració
- Desembalar: Traieu amb cura tots els components de l'embalatge.
- Col·locació: Place the main unit on a stable, level surface in a well-ventilated area.
- Connexió d'alimentació: Connect the power adapter to the unit and then to a power outlet.
- Gooseneck Light Installation: Insert the gooseneck light into its designated port on the main unit.
- Washing Bucket Preparation:
- For washing, place the washing basket inside the washing bucket.
- Fill the washing bucket with your chosen cleaning solution (e.g., IPA) up to the appropriate level, ensuring it covers the models to be cleaned.
- Curing Table Preparation: For curing, ensure the curing table is placed on the rotating platform.
Vídeo 4.1: Oficial acabatview of the Wash and Cure 3.0, demonstrating its features and basic setup.
5. Instruccions de funcionament
5.1. Washing Mode
- Prepare Models: Remove printed models from the build plate. For models still on the build plate, use the hanging cleaning mode. For detached models, place them in the washing basket.
- Place Washing Bucket: Position the washing bucket with the models and cleaning solution onto the main unit's platform. Ensure the UV-blocking cover is in place.
- Seleccioneu el mode de rentat: Press the "Wash" button on the control panel.
- Establir hora: Use the rotary knob to set the desired washing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Començar a rentar: Press the Start/Stop button to begin the washing cycle. The internal propeller will agitate the cleaning solution.
- Finalització: The machine will beep when the cycle is complete. Carefully remove the models and allow them to dry.
Figura 5.1: Dual cleaning modes for models on a build plate (hanging) or detached (basket).
Vídeo 5.1: Demonstration of the washing process in the ANYCUBIC Wash and Cure 2.0 machine, which shares similar washing mechanisms with the 3.0 model.
5.2. Curing Mode
- Place Models: After washing and drying, place the models on the curing table.
- Position Curing Table: Place the curing table with models onto the main unit's rotating platform. Ensure the UV-blocking cover is in place.
- Select Cure Mode: Press the "Cure" button on the control panel.
- Establir hora: Use the rotary knob to set the desired curing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Activate Gooseneck Light (Optional): Press the "FlexiCure" button to activate the gooseneck light for targeted curing of complex areas.
- Començar el curat: Press the Start/Stop button to begin the curing cycle. The platform will rotate, and UV lights will activate.
- Finalització: The machine will beep when the cycle is complete. Remove the fully cured models.
Figura 5.2: The gooseneck light provides localized strengthening and uniform curing for intricate details on 3D models.
Vídeo 5.2: A user demonstrating the curing process with the ANYCUBIC Wash and Cure station, highlighting its ease of use.
6. Manteniment
- Cleaning the Washing Bucket: Regularly clean the washing bucket and basket to prevent resin buildup. Dispose of used cleaning solution responsibly according to local regulations.
- Neteja de la unitat: Wipe down the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- UV Light Maintenance: Keep the UV lights and gooseneck light clean and free of dust or resin residue to ensure optimal curing performance.
- Emmagatzematge: When not in use, store the unit in a cool, dry place away from direct sunlight.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Cable d'alimentació no connectat; problema amb la presa de corrent. | Comproveu la connexió del cable d'alimentació; proveu una presa de corrent diferent. |
| Washing/Curing cycle does not start. | Top cover not properly closed; mode not selected. | Ensure the UV-blocking cover is securely in place; select desired mode (Wash/Cure). |
| Models are not clean after washing. | Insufficient washing time; dirty cleaning solution; incorrect IPA concentration. | Increase washing time; replace cleaning solution; ensure proper IPA concentration. |
| Models are sticky after curing. | Insufficient curing time; models not dry before curing; UV lights are dirty. | Increase curing time; ensure models are completely dry; clean UV lights. |
8. Especificacions
| Característica | Detall |
|---|---|
| Model | Rentat i curat 3 |
| Dimensions del producte | 8.86 x 8.66 x 14.88 polzades |
| Pes de l'article | 0.01 unces |
| Marca | ANYCUBIC |
| Material | PC+metal |
| Color | Multicolor |
| Maximum Cleaning Volume | 165 x 100 x 180 mm (4L bucket) |
| Llum UV | 10pcs 405nm + Gooseneck Light |
| Mida màxima de curat | Φ160 x 180 mm |
| Temporitzador | 1-30 minuts ajustables |
Figura 8.1: Detailed comparison of Wash and Cure 3 and Wash and Cure 3 Plus specifications.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the official ANYCUBIC weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Podeu visitar el ANYCUBIC Official Store per a més productes i recursos de suport.
