1. Introducció i finalview
This manual provides instructions for the Thule Kit Flush Rail 6023, a roof rack fitting kit designed for vehicles equipped with integrated flush rails. This kit is an essential component for securely attaching a Thule roof rack system to your vehicle.
The Thule Kit Flush Rail 6023 is compatible with Thule Evo Flush Rail and Thule Edge Flush Rail foot packs, ensuring a precise and secure fit for your roof rack system.
2. Configuració i instal·lació
The Thule Kit Flush Rail 6023 is designed to securely attach Thule roof rack systems to vehicles with integrated flush rails. Proper installation is crucial for safety and performance.
Important: Always refer to the specific Thule Buyer's Guide for your vehicle model to ensure correct fitment and detailed installation steps. This kit requires a compatible Thule foot pack (e.g., Thule Evo Flush Rail or Thule Edge Flush Rail) and Thule load bars, which are sold separately.
General Installation Steps (Consult vehicle-specific guide for details):
- 1. Identify Mounting Points: Locate the designated mounting points on your vehicle's flush rails.
- 2. Assemble Foot Pack: Attach the Thule Kit Flush Rail 6023 components to your Thule foot pack according to the foot pack's instructions.
- 3. Position Roof Rack: Carefully place the assembled foot packs with the kit onto the vehicle's flush rails, aligning them with the identified mounting points.
- 4. Secure Fasteners: Tighten all fasteners evenly and securely as specified in your vehicle-specific Thule instructions. Do not overtighten.
- 5. Verify Security: Before driving, gently pull on the roof rack system to ensure it is firmly attached and there is no movement.
An image displaying the primary components of the Thule Kit Flush Rail 6023. It consists of black molded plastic bases designed to interface with vehicle flush rails, along with metal clamping mechanisms that secure the roof rack foot pack to the vehicle. The components are shown disassembled, highlighting their individual shapes and connection points.
3. Instruccions de funcionament
Once installed, the Thule Kit Flush Rail 6023 facilitates the secure attachment of your Thule roof rack system. The primary 'operation' involves ensuring the system remains correctly installed and maintained.
- Pre-Drive Check: Before each journey, especially after initial installation and after driving for a short distance, visually inspect the roof rack system. Ensure all components of the Thule Kit Flush Rail 6023 and the foot pack are properly tightened and securely seated on the vehicle's flush rails.
- Capacitat de càrrega: Do not exceed the maximum load capacity of 75 kg for the roof rack system, or the vehicle manufacturer's recommended roof load, whichever is lower. Distribute the load evenly.
- Velocitat de conducció: Adjust your driving speed to suit the load and road conditions. Avoid sudden braking or sharp turns when carrying a load.
4. Manteniment
Regular maintenance ensures the longevity and safe operation of your Thule Kit Flush Rail 6023.
- Inspecció: Periodically inspect all components of the kit for any signs of wear, damage, cracks, or corrosion. Pay close attention to the plastic bases and metal clampmecanismes d'ing.
- Estancament: Ensure all bolts, screws, and fasteners remain tight. Re-tighten if necessary, following the torque specifications provided in your vehicle-specific Thule instructions.
- Neteja: Clean the components with mild soap and water as needed. Rinse thoroughly and dry completely. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the materials.
- Emmagatzematge: If removing the roof rack system for extended periods, store the Thule Kit Flush Rail 6023 components in a dry, protected environment.
5. Solució De Problemes
Si teniu problemes amb el vostre Thule Kit Flush Rail 6023, tingueu en compte el següent:
- Ajust ample: If the roof rack system feels loose after installation, re-check all fasteners and ensure they are tightened to the specified torque (if provided in your vehicle-specific guide). Verify that the correct kit and foot pack are being used for your specific vehicle model.
- Soroll excessiu: Excessive wind noise can sometimes occur. Ensure all components are correctly positioned and tightened. Check for any gaps or misalignments in the installation.
- Peces que falten: If any parts are missing from your kit upon unboxing, contact Thule customer support immediately with your purchase details.
- Dificultat d'instal·lació: If you experience difficulty during installation, double-check that you have the correct kit for your vehicle and that you are following the vehicle-specific instructions precisely. Do not force components.
6. Especificacions
- Marca: Thule
- Model: Kit Flush 6023
- Pes de l'article: 24 g
- Dimensions del producte (L x A x A): 22 x 16 x 7.5 cm
- Número de model del fabricant: 186023
- Maximum Load Capacity (System): 75 kg (Always adhere to the lower of the roof rack system's capacity or your vehicle's roof load limit.)
- Tipus de servei de vehicles: Cotxe
- Fixation Type: Strap (Note: This refers to an internal component or general category; the kit itself provides a secure interface for flush rails.)
- Color: Negre
7. Garantia i Suport
For detailed warranty information, product support, or to find the correct kit for your specific vehicle model, please visit the official Thule weblloc web o contacteu directament amb el servei d'atenció al client de Thule. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
Thule Oficial Weblloc: www.thule.com
