Introducció
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Casio MRW200H Series Analog Watch, model MRW-200HD-1BVCF. Please read this manual thoroughly to ensure proper use and longevity of your timepiece.
Figura 1: Davant view of the Casio MRW200H Series Analog Watch, showcasing its silver stainless steel band and black dial with clear hour markers and hands.
Producte acabatview
The Casio MRW200H Series watch is designed for durability and functionality, featuring a 100-meter water resistance and a clear analog display. Key components include:
- Corretja d'acer inoxidable: Durador i còmode per a ús diari.
- Resin Case and Bezel: Provides protection and lightweight design.
- Triple-fold Clasp: Secure fastening mechanism.
- Timer Bezel: Rotatable bezel for basic timing functions.
- Resin Glass: Clear and durable watch face cover.
- Visualització de data i dia: Convenient display of current date and day of the week.
- Pantalla analògica: Three hands (hour, minute, second) for precise timekeeping.
- Resistència a l'aigua: Rated for 100 meters, suitable for swimming and snorkeling.
Figura 2: The Casio MRW200H Series Analog Watch worn on a wrist, demonstrating its fit and appearance during use.
Configuració
Configuració inicial de la data i l'hora
- Traieu la corona: Gently pull the crown (located on the right side of the watch case) out to the first click position. This stops the second hand.
- Estableix la data: Gireu la corona en sentit antihorari per ajustar la data.
- Estableix el dia: Gireu la corona en sentit horari per ajustar el dia de la setmana.
- Estableix l'hora: Pull the crown out to the second click position. Rotate the crown to set the hour and minute hands. Advance the minute hand four or five minutes past the desired time, then turn it back to the correct time. Ensure the AM/PM is correctly set if the watch has a 24-hour indicator or if setting the date/day.
- Premeu la corona: Empenyeu la corona de nou a la posició normal. La maneta dels segons reprendrà el moviment.
Nota: The date changes around midnight. If the date changes during the day, it means the AM/PM setting is incorrect. Advance the time by 12 hours.
Instruccions de funcionament
Using the Timer Bezel
The rotating bezel can be used for basic elapsed time measurement. Align the "0" mark on the bezel with the minute hand at the start of an event. As time passes, the minute hand will point to the elapsed time on the bezel scale.
Resistència a l'aigua
This watch is rated for 100-meter (10 BAR) water resistance. This means it is suitable for everyday use, swimming, and snorkeling. Do not operate the crown or push buttons while the watch is wet or submerged. Avoid exposing the watch to hot water or steam, as this can compromise the water resistance seals.
Manteniment
Neteja del rellotge
- Netegeu el rellotge regularment amb un drap suau i sec per eliminar la brutícia i la humitat.
- For stubborn dirt, use a soft brush and mild soap solution, then rinse thoroughly with fresh water and dry completely.
- Avoid using chemical cleaners or solvents, as these can damage the watch's finish and seals.
Canvi de bateria
The watch uses one SR626SW battery with an approximate life of 3 years. When the second hand begins to move at two-second intervals, it indicates that the battery is low and needs replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance.
Emmagatzematge
Quan no l'utilitzeu durant períodes prolongats, guardeu el rellotge en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El rellotge s'atura o perd el temps. | Bateria baixa. | Replace battery (refer to Maintenance section). |
| Date/Day changes at noon. | La configuració AM/PM és incorrecta. | Advance the time by 12 hours (refer to Setup section). |
| Aigua dins del rellotge. | Crown not fully pushed in, or seals compromised. | Immediately take the watch to a qualified technician for inspection and repair. Do not attempt to dry it yourself. |
| Hands do not move when crown is pulled out. | Problema de mecanisme intern. | Contact Casio customer support or an authorized service center. |
Especificacions
- Número de model: MRW-200HD-1BVCF
- Material de la caixa: Resina
- Material del bisell: Resina
- Material de la banda: Acer inoxidable
- Tipus de tancament: Triple-fold Clasp
- Tipus de vidre: Resin Glass
- Resistència a l'aigua: 100 metres (10 BAR)
- Tipus de visualització: Analog (Hour, Minute, Second hands)
- Funcions addicionals: Date display, Day display, Timer Bezel
- Tipus de bateria: SR626SW
- Aprox. Durada de la bateria: 3 anys
- Dimensions del producte: 9.84 x 1.57 x 0.79 polzades
- Pes de l'article: 5.6 unces
- Fabricant: CASIO
Figura 3: The packaging box for the Casio MRW200H Series Analog Watch, typically containing the watch and instruction manual.
Garantia i Suport
Per obtenir informació detallada sobre la garantia, consulteu la targeta de garantia inclosa amb el producte o visiteu el lloc web oficial de Casio. website. Casio provides customer support for product inquiries, service, and repairs.
Casio oficial Weblloc: www.casio.com
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
