Nerf Hyper Siege-50 Pump-Action Blaster Instruction Manual

1. Informació de seguretat

ADVERTIMENT: To avoid eye injury, do not aim at eyes or face. Use only official NERF Hyper rounds. Other rounds may not meet safety standards. Do not modify rounds or blaster. Always wear the included eyewear when using this blaster.

Recomanat per a majors de 14 anys.

Image: A user demonstrating the proper use of the Nerf Hyper Siege-50 blaster, including wearing the required safety eyewear.

2. Què hi ha a la caixa

Your Nerf Hyper Siege-50 Blaster package includes:

• 1x Nerf Hyper Siege-50 Blaster
• 40x Nerf Hyper Rounds
• 1x Pair of Eyewear

Image: The complete contents of the Nerf Hyper Siege-50 Blaster package, including the blaster, 40 Hyper rounds, and safety eyewear.

3. Configuració

3.1 Loading Rounds

The Nerf Hyper Siege-50 blaster features a large, easy-load hopper with a 50-round capacity. To load the rounds:

1. Open the hopper door located on the top of the blaster.
2. Carefully insert the Nerf Hyper rounds into the hopper. Ensure they are not jammed.
3. Close the hopper door securely.

Imatge: Un primer pla view of the blaster's hopper, showing the yellow Hyper rounds being loaded into the transparent compartment.

3.2 Wearing Eyewear

Always wear the included safety eyewear when operating the Nerf Hyper Siege-50 blaster to protect your eyes from projectiles.

4. Instruccions de funcionament

4.1 Preparació del Blaster

The Siege-50 is a pump-action blaster. To prime it, firmly pull the priming slide located on the front of the blaster all the way back, then push it all the way forward. This action loads a round into the firing chamber.

4.2 Firing Modes

• Tir únic: After priming, press the trigger to fire one round.
• Slam-Fire: Hold down the trigger and continuously pump the priming slide back and forth to rapidly fire multiple rounds.

4.3 Bloqueig del disparador

The blaster includes a trigger lock for safety. Engage the trigger lock when the blaster is not in use to prevent accidental firing. Disengage it before priming and firing.

5. Manteniment

• Keep the blaster clean and free from dirt or debris. Use a dry cloth to wipe down surfaces.
• Guardeu el blaster i els cartutxos en un lloc fresc i sec, allunyat de la llum solar directa.
• Do not use water or harsh chemicals to clean the blaster.

6. Solució De Problemes

Blaster Not Firing or Rounds Jamming:

• Ensure the hopper is properly loaded and the door is securely closed.
• Check if the priming slide is fully pulled back and pushed forward.
• Verify that the trigger lock is disengaged.
• Inspect the firing mechanism for any lodged rounds or debris. Clear any obstructions carefully.
• Use only official Nerf Hyper rounds for optimal performance and to prevent jamming.

7. Especificacions

8. Garantia i Suport

For warranty information, product support, or to purchase additional Nerf Hyper rounds and accessories, please visit the official Nerf website or contact Hasbro customer service.

També podeu visitar el Botiga Nerf a Amazon per a més productes i informació.