Manual d'usuari del pedal Walrus Audio Julia Analogic Chorus/Vibrato V2

Introducció

The Julia is a fully analog, feature-rich chorus/vibrato pedal designed to produce a wide array of tonal landscapes. Updated for 2020, this V2 version features top-mounted jacks, soft switch bypassing, and updated artwork. The pedal is capable of producing mild, smooth chorus effects, seasick vibrato, and everything in between. Controls such as Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes allow for dialing in both classic and unique modulation sounds.

Figura 1: Frontal view of the Walrus Audio Julia V2 Pedal, showcasing its controls and artwork.

Configuració

Requisits d'alimentació

The Walrus Audio Julia V2 pedal requires a standard 9V DC power supply (center-negative). Ensure your power supply provides at least 100mA. Using an incorrect power supply may damage the unit and void the warranty.

Connexions

Connect your instrument to the INPUT jack and your amplifier or next pedal in the signal chain to the OUTPUT jack. Both jacks are top-mounted for efficient pedalboard layout.

Figura 2: superior view of the pedal, illustrating the input and output jack placement.

Placement in Signal Chain

Place the Julia V2 pedal in your signal chain where modulation effects are desired, typically after drive pedals and before time-based effects like delay or reverb.

Instruccions de funcionament

The Julia V2 features several controls to shape your chorus and vibrato sounds:

• TARIFA: Controls the speed of the LFO (Low-Frequency Oscillator) sweep. Turn clockwise for faster modulation, counter-clockwise for slower modulation.
• PROFUNDITAT: Ajusta el amplitude or intensity of the LFO. Turn clockwise for deeper, more pronounced modulation, counter-clockwise for subtle effects.
• GAL: This unique control sets the center delay time around which the LFO modulates. Lower settings provide smooth, tight modulation, while maximum settings introduce warbling detune effects.
• D-C-V BLEND: (Dry-Chorus-Vibrato Blend) This knob mixes the dry signal with the wet (modulated) signal. At minimum, only the dry signal is heard. At noon, it provides a traditional chorus sound (equal dry/wet mix). At maximum, it delivers a 100% wet vibrato effect.
• INTERRUPTOR D'ONA: A toggle switch to select between sine and triangle LFO waveforms. The triangle wave generally suits chorus effects with sharper corners, while the sine wave's rounder shape is often preferred for vibrato.

Soft Switch Bypassing

The Julia V2 features soft switch bypassing for silent and smooth engagement/disengagement of the effect.

Vídeos de demostració

Manteniment

Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning. Avoid exposing it to extreme temperatures, moisture, or direct sunlight. Disconnect power when not in use for extended periods to prolong component life.

Resolució de problemes

If the pedal is not functioning correctly, first check all cable connections (instrument, amplifier, and power supply) and ensure the power supply meets the specified 9V DC, 100mA (center-negative) requirements. If issues persist, consult the Walrus Audio support weblloc web o poseu-vos en contacte amb el servei d'atenció al client per obtenir més ajuda.

Especificacions

Garantia

This product is covered by the manufacturer's limited warranty. Please refer to the official Walrus Audio weblloc web per obtenir informació detallada sobre la garantia i els procediments de registre.

Suport

For technical assistance, product inquiries, or warranty claims, please visit the official Walrus Audio website or contact their customer support team directly through the contact information provided on their site.