Introducció
This manual provides essential information for the safe and effective use of your VARTA Indestructible H20 Pro LED Headlamp. Please read this manual thoroughly before operating the device and retain it for future reference.
The VARTA Indestructible H20 Pro is a high-performance LED headlamp designed for durability and reliability in demanding environments. It features a robust, shock-absorbing housing, two light levels, and is water and dust proof, making it suitable for various outdoor activities.
Producte acabatview
Figura 1: Frontal view of the VARTA Indestructible H20 Pro Headlamp, showing the LED light and adjustable headband.
Figura 2: lateral view del capamp, illustrating the tilting lamp head mechanism and headband attachment points.
Figure 3: Packaging of the VARTA Indestructible H20 Pro, highlighting key features like robustness and light levels.
Característiques principals:
- High performance Cree LED with two light levels (High: 350 lumens, Low: 30 lumens).
- Extremely robust design, drop-tested from 9 meters height.
- Shock-absorbing, rubberized housing for enhanced durability.
- Construcció compacta i lleugera.
- Tilting lamp head for adjustable beam direction.
- Splash-proof (IPX4) for reliable use in various weather conditions.
- Includes 3 x AAA batteries and an adjustable headband.
Configuració i instal·lació de la bateria
1. Desembalatge:
Carefully remove the headlamp and all accessories from the packaging. Verify that all components are present: VARTA Indestructible H20 Pro Headlamp, adjustable headband, and 3 x AAA batteries.
2. Instal·lació de la bateria:
- Locate the battery compartment on the headlamp cos.
- Open the battery compartment cover. This may involve twisting or unlatching a mechanism, depending on the specific design. Refer to the markings on the device for correct opening direction.
- Insert the 3 x AAA batteries into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment. Incorrect installation can prevent the device from functioning.
- Securely close the battery compartment cover to maintain the headlamp's splash-proof rating.
3. Attaching the Headband:
Thread the adjustable headband through the designated slots on the headlamp body. Adjust the length of the headband to ensure a comfortable and secure fit on your head or helmet.
Instruccions de funcionament
1. Encendre/apagar:
Press the power button, typically located on the top or side of the headlamp, to turn the device on. Press the button again to cycle through the light modes or to turn the device off.
2. Modes de llum:
The VARTA Indestructible H20 Pro features two light levels:
- Mode alt: Provides 350 lumens for maximum brightness and range (approx. 100 meters). Ideal for activities requiring extensive illumination.
- Mode baix: Provides 30 lumens for extended battery life and close-range illumination. Suitable for reading or tasks where less light is needed.
To switch between modes, briefly press the power button while the headlamp està activat.
3. Tilting Lamp Cap:
El lamp head can be tilted vertically to adjust the beam angle. Gently pivot the lamp head to direct the light precisely where needed.
Manteniment i cura
1. Neteja:
Netegeu el capamp cos amb un suau, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the housing or lens. Ensure the battery compartment is sealed before cleaning.
2. Substitució de la bateria:
When the light output diminishes significantly, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace all three AAA batteries at the same time with new, high-quality alkaline batteries.
3. Emmagatzematge:
Si el capamp will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store the headlamp en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Capamp no s'encén. |
|
|
| La llum és tènue o parpelleja. |
|
|
| Capamp es mulla per dins. |
|
|
If the problem persists after attempting these solutions, please contact VARTA customer support.
Especificacions tècniques
| Model: | H20 Pro (17732101421) |
| Font de llum: | LED Cree |
| Brightness (High Mode): | 350 lúmens |
| Brightness (Low Mode): | 30 lúmens |
| Beam Range: | Aprox. 100 metres |
| Temps d'execució: | Fins a 23 hores |
| Font d'alimentació: | 3 piles alcalines AAA (incloses) |
| Resistència a l'aigua: | IPX4 (a prova d'esquitxades) |
| Drop Test Rating: | 9 metres |
| Pes: | 75 grams (2.65 unces) |
| Dimensions: | 0.2 x 1.77 x 3.35 polzades |
Garantia i Suport
Informació de la garantia:
VARTA products are manufactured to high quality standards. While a specific warranty description is not provided in the product details, consumers typically have statutory rights under local consumer protection laws regarding product defects. Please refer to your point of purchase or local consumer laws for details on returns or defects.
EU spare part availability is stated as 1 year.
Atenció al client:
For further assistance, technical inquiries, or troubleshooting not covered in this manual, please contact VARTA customer support through their official weblloc web o el distribuïdor on vau comprar el producte.
Note: Always refer to the latest information available on the official VARTA website for the most up-to-date support and product details.
