1. Introducció
The Shure Stem Table Array Speakerphone, Model TABLE1, is designed to provide high-quality audio conferencing for various meeting environments. It integrates nine built-in microphones with advanced digital signal processing to ensure clear communication.
Figure 1: Shure Stem Table Array Speakerphone (Model TABLE1)
This manual provides detailed instructions for setting up, operating, and maintaining your Stem Table speakerphone.
2. Què hi ha a la caixa
Verifiqueu que tots els components siguin presents a l'embalatge:
- Shure Stem Table Speakerphone
- 15 ft (4.6m) Cat 6 Ethernet Cable
- 12 ft (3.7m) USB-A to USB-B Cable
Figura 2: Components inclosos
3. Configuració i instal·lació
The Stem Table speakerphone is designed for straightforward installation, primarily utilizing Power over Ethernet (PoE+).
Figure 3: Easy Installation with PoE+ and USB-B
- Power Connection (PoE+): Connect the provided Cat 6 Ethernet cable to the PoE+ port on the Stem Table. The other end of the Ethernet cable must be connected to a PoE+ enabled network switch or a PoE+ injector (sold separately). The device requires PoE+ for power.
- Data Connection (USB): For direct connection to a computer, connect the provided USB-A to USB-B cable from the Stem Table's USB-B port to an available USB-A port on your computer. This connection facilitates audio data transfer.
- Col·locació: Place the Stem Table on a flat surface in the center of your meeting area for optimal microphone coverage.
- Reconeixement del sistema: Once powered and connected, your computer or conferencing system should automatically recognize the Stem Table as an audio input and output device. Select it as your preferred speaker and microphone in your conferencing software settings.
Nota important:
The Stem Table requires Power over Ethernet Plus (PoE+) for operation. A standard Ethernet connection without PoE+ will not power the device. If your network infrastructure does not support PoE+, a separate PoE+ injector is required.
