Producte acabatview
The Ozone Morphy BT M Smart Digital Door Lock is an advanced electronic locking system designed to enhance the security of your home or office. It offers multiple access methods and smart features for convenient and reliable operation.
Figura 1: Frontal view of the Ozone Morphy BT M Smart Digital Door Lock, showcasinel teclat numèric i la nansa.
This lock is suitable for doors with a thickness ranging from 35mm to 75mm and features a universal handle that can be adjusted for left or right-hand door openings.
Característiques clau
- Múltiples modes d'accés: Fingerprint, RFID Card, Emergency Override Key, OzoLok Mobile App, and User PIN Code.
- OzoLok Mobile App: Bluetooth connectivity for unlocking, remote control via Wi-Fi (with optional gateway), and access management (permanent, time-based, OTP, cyclic).
- Mode de pas: Allows manual locking for areas not requiring constant security.
- Alarmes de seguretat: Auto Secure Alarm and Smart Freeze Mode after multiple incorrect PIN attempts.
- Notificació de bateria baixa: Alerts users when battery levels are low.
- Universal Handle: Adaptable for both left and right-hand door configurations.
Figura 2: Mésview of Morphy BT M features, detailing various access methods, alarm functions, and smart capabilities.
Instal·lació i Configuració
1. Desembalatge i inspecció
Carefully unpack all components and verify that all parts listed in the packing list are present and undamaged. Refer to the product dimensions for pre-installation checks.
Figure 3: Product dimensions for the Ozone Morphy BT M lock, illustrating measurements for both front and back panels.
2. Preparació de la porta
Ensure your door thickness is between 35mm and 75mm. The lock is designed for both wooden and metal doors.
Figure 4: The Ozone Morphy BT M lock installed on both a wooden door and a metal door, highlighting its versatile application.
3. Instal·lació de la bateria
Install the required batteries into the battery compartment located on the back panel. Ensure correct polarity. The lock will provide a low battery notification when replacement is needed.
4. Programació Inicial
Follow the on-screen prompts or refer to the quick start guide for initial administrator setup, including setting the master PIN code and registering the first fingerprint/RFID card.
Instruccions de funcionament
Obrint la Porta
- Empremta digital: Place registered finger on the sensor.
- Codi PIN: Enter your registered PIN code followed by '#'.
- Targeta RFID: Present the registered RFID card to the card reader area.
- OzoLok App: Open the app and use the unlock function via Bluetooth. For remote access, ensure the optional OZ-GATEWAY-11 is connected and configured.
- Clau d'emergència: Insert and turn the emergency override key.
Tancant la porta
The lock typically auto-locks after closing. In Passage Mode, the door will not auto-lock, requiring manual locking when desired.
Managing Users and Settings (via OzoLok App)
The OzoLok mobile app allows for comprehensive management of your lock:
- Add/Delete User Fingerprints, PINs, and RFID Cards.
- Generate Time-based, One-Time, or Cyclic Passwords.
- View Access Logs (Audit Trail).
- Adjust lock settings, including Passage Mode activation.
Manteniment
- Neteja: Use a soft, dry cloth to clean the lock surface. Avoid abrasive cleaners or solvents.
- Substitució de la bateria: Replace all batteries promptly when the low battery notification is triggered to ensure continuous operation.
- Sensor d’empremta digital: Mantingueu el sensor d'empremtes dactilars net i sec per a un rendiment òptim.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Lock not responding. | Bateries esgotades. | Replace batteries. Use emergency key if necessary. |
| Empremta digital no reconeguda. | Dirty sensor, unregistered fingerprint, or improper placement. | Clean sensor. Re-register fingerprint. Ensure proper finger placement. |
| El codi PIN no funciona. | Incorrect PIN, Smart Freeze Mode activated. | Verify PIN. Wait for Smart Freeze Mode to reset or use another access method. |
| Cannot connect to OzoLok App. | Bluetooth off, app not paired, or Wi-Fi gateway issue. | Ensure Bluetooth is on. Re-pair app. Check OZ-GATEWAY-11 connection if using remote access. |
Especificacions
- Model: OZ-FDL-02
- Material: ABS Plastic + Zinc Alloy
- Tipus de bloqueig: Pany electrònic
- Mètodes d'accés: Fingerprint, RFID Card, PIN Code, OzoLok App, Emergency Key
- Compatibilitat amb el gruix de la porta: 35-75 mm
- Connectivitat: Bluetooth (for app), Wi-Fi (with optional OZ-GATEWAY-11)
- Color: Negre
- Dimensions: Approximately 270mm (H) x 70mm (W) (Front Panel)
- Pes: 3 kg 180 g
Garantia i Suport
The Ozone Morphy BT M Smart Digital Door Lock comes with a 24 mesos de garantia provided by the manufacturer from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact Ozone customer service. Refer to the official Ozone weblloc web o la documentació de la compra per obtenir les dades de contacte.
Per a més informació, podeu visitar el Ozone Store on Amazon.
