1. Introducció
Thank you for choosing the POOLEX POOLSTAR Silverline Inverter 210 Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new pool heat pump. Designed for pools up to 110 m³, this unit features a multi-frequency compressor and variable fan for optimal performance and quiet operation, along with Wi-Fi connectivity for convenient control.
2. Informació de seguretat
WARNING: Read all safety warnings and instructions carefully before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Ensure the heat pump is installed by a qualified technician in accordance with local electrical and plumbing codes.
- Always disconnect power to the unit before performing any maintenance or service.
- Do not operate the heat pump if any part is damaged or if the power cord is frayed.
- Mantingueu els nens i les mascotes allunyats de la unitat durant el funcionament.
- Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- No bloquegeu les sortides d'entrada ni d'escapament d'aire.
- This appliance is designed for heating pool water only. Do not use for other purposes.
3. Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:
- POOLEX POOLSTAR Silverline Inverter 210 Heat Pump Unit
- Anti-vibration Support Kit (4 pieces)
- PVC Connectors (Ø 50mm 1" ½)
- Mànega de drenatge de condensats
- Wired Control Extension Cable (10m)
- User Manual and Documentation Folder
- Protective Cover (for storage/protection)
POOLEX Silverline Inverter 210 Heat Pump
Anti-vibration Supports
PVC Connectors
Mànega de drenatge de condensats
Wired Control Extension Cable
Funda protectora
User Manual Folder
4. Configuració
4.1. Col·locació
- Choose a well-ventilated outdoor location, away from direct sunlight and heat sources.
- Ensure sufficient clearance around the unit for proper airflow (refer to specific distances in the detailed manual).
- Place the unit on a solid, level surface. Use the provided anti-vibration supports to minimize noise and vibration.
4.2. Connexions d'aigua
- Connect the heat pump to your pool's filtration system using the supplied PVC connectors (Ø 50mm 1" ½).
- Assegureu-vos que totes les connexions siguin estanques per evitar fuites.
- Install the condensate drain hose to direct condensed water away from the unit's base.
4.3. Connexions elèctriques
- Electrical installation must be performed by a certified electrician.
- Ensure the power supply matches the specifications of the heat pump (refer to the rating label on the unit).
- Connect the wired control extension cable if you wish to relocate the LED control panel up to 10 meters away from the main unit.
5. Instruccions de funcionament
5.1. Posada en marxa inicial
- Assegureu-vos que la bomba de la piscina estigui en funcionament i que l'aigua flueixi a través de la bomba de calor.
- Engegueu l'alimentació de la bomba de calor.
- The unit will perform a self-check.
5.2. Configuració de la temperatura
- Use the LED control panel to set your desired pool water temperature.
- The heat pump will automatically adjust its operation to reach and maintain the set temperature.
5.3. Connectivitat Wi-Fi
- Download the dedicated POOLEX application on your smartphone.
- Segueix les instruccions de l'aplicació per connectar la bomba de calor a la xarxa Wi-Fi de casa teva.
- Once connected, you can monitor and control your heat pump remotely from your smartphone.
6. Manteniment
6.1. Neteja periòdica
- Netegeu periòdicament l'exterior de la unitat amb un drap suau i sec.amp tela.
- Ensure the air intake and exhaust grilles are free from debris (leaves, dirt, etc.).
6.2. Water Flow Check
- Regularly check the pool filter and pump to ensure adequate water flow to the heat pump. Reduced flow can impact performance.
6.3. Hivernació
- Before freezing temperatures, drain all water from the heat pump and plumbing lines to prevent damage.
- Desconnecteu la font d'alimentació.
- Cover the unit with the provided protective cover for off-season storage.
7. Solució De Problemes
If you encounter issues, refer to the table below for common problems and solutions. For complex issues, contact customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba de calor no s'encén | No power supply; Circuit breaker tripped | Comproveu la connexió d'alimentació; Restableix l'interruptor automàtic |
| Low heating performance | Insufficient water flow; Dirty coils; Ambient temperature too low | Check pool pump and filter; Clean unit coils; Operate within recommended temperature range |
| Soroll inusual | Loose components; Debris in fan; Unit not level | Inspect for loose parts; Clear debris; Ensure unit is level and anti-vibration supports are used |
| Problemes de connexió Wi-Fi | Incorrect password; Router too far; App issues | Verify Wi-Fi password; Move router closer or use extender; Reinstall app |
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | PC-SLP200N |
| Dimensions (L x A x A) | 110.4 x 33.4 x 75.6 cm |
| Pes | 25 kg |
| Volum de piscina recomanat | 80 - 110 m³ |
| Tipus de compressor | Multi-frequency (Mitsubishi) |
| Intercanviador de calor | Twisted Tech (Titanium coil) |
| Connectivitat | Wi-Fi, Wired Control Panel (10m extension) |
| COP (26°C/26°C) | Fins a 16 |
9. Garantia i Suport
POOLEX is committed to your satisfaction. For warranty information, please refer to the documentation included with your product or visit the official POOLEX website. In case of technical issues or questions, please contact POOLEX customer service.
Please note that information regarding spare parts availability is not readily available. For any spare parts inquiries, please contact POOLEX customer support directly.
Per obtenir més ajuda, visiteu: www.poolex.fr
