Introducció
The Streamlight 69434 TLR-8A G Flex is a compact and durable weapon-mounted light with an integrated green aiming laser, designed for enhanced tactical advantage. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your TLR-8A G Flex.

Figura 1: Frontal view of the Streamlight TLR-8A G Flex Pistol Light.
Producte acabatview
Característiques clau
- Securely attaches to a wide range of handguns via a robust rail clamp sistema.
- High mode provides a bright 500 lumens with 5000 Candela and a 140-meter beam distance.
- Run time of 1.5 hours with light only.
- Features three user-friendly modes: LED Light Only, LED/Laser Combo, and Laser Only.
- Includes a user-enabled strobe mode for tactical situations.
- Integrated green aiming laser (Class 3R, 510-530nm, <5mW output) for enhanced precision.
- Next-generation rear paddle switch designed for intuitive and seamless operation.
- "Safe Off" feature prevents accidental activation, conserving battery life.
- Durable aluminum construction designed to withstand extreme conditions.
- Lightweight and low-profile design ensures a seamless fit on your firearm.
Components inclosos
Your Streamlight TLR-8A G Flex package includes the following items:
- 1x CR123A Battery
- High and Low Switches (pre-installed or as alternatives)
- Kit de muntatge
- Key Box and Tool (for rail key selection and laser adjustment)
- TLR-8 X G Flashlight unit
- Guia de l'usuari (aquest document)

Figure 2: The TLR-8A G Flex unit with a CR123A battery, which is included.
Informació de seguretat
ADVERTIMENT: Aquest producte conté productes químics coneguts per l'estat de Califòrnia per causar càncer i defectes de naixement o altres danys reproductius.
Always handle firearms safely. Ensure the firearm is unloaded and pointed in a safe direction before attaching, detaching, or performing any maintenance on the TLR-8A G Flex. Avoid direct eye exposure to the laser beam. Do not disassemble the unit beyond what is described in this manual.
Configuració
Instal·lació de la bateria
- Unscrew the face cap of the light by twisting it counter-clockwise.
- Insert one CR123A battery with the positive (+) end facing towards the light head.
- Screw the face cap back on clockwise until it is finger-tight. This also serves as the "Safe Off" feature when slightly loosened.
Mounting to Firearm
The TLR-8A G Flex features a rail clamp system for quick and secure attachment without tools.
- Assegureu-vos que l'arma de foc estigui descarregada i segura.
- Select the appropriate rail key from the included kit that best fits your firearm's rail. Refer to the compatibility list provided by Streamlight for specific handgun models.
- Afluixeu el rail clamp screw on the TLR-8A G Flex.
- Align the rail key with the cross slot on your firearm's rail.
- Push the TLR-8A G Flex onto the rail until the rail key engages the cross slot.
- Apretar el rail clamp screw firmly by hand. Ensure the unit is securely attached and does not wobble.

Figure 3: The TLR-8A G Flex comes with various mounting keys for compatibility.
Instruccions de funcionament
Funcionament de commutació
The TLR-8A G Flex features ambidextrous rear paddle switches for activation.

Figure 4: The TLR-8A G Flex can be configured with high or low profile rear paddle switches.
- Momentània activada: Press and hold either paddle switch. Release to turn off.
- Encès constant: Quickly tap either paddle switch. Tap again to turn off.
- Strobe Mode (User-Enabled): From the "Off" position, quickly double-tap either paddle switch and hold on the second tap to activate strobe. Release to turn off. To enable or disable the strobe feature permanently, rapidly tap either switch 9 times, holding on the 10th tap. The light will flash to confirm the change.
Mode Selection (Light, Laser, or Both)
The TLR-8A G Flex offers three operational modes:
- LED Light Only: Provides powerful illumination without the laser.
- LED Light & Laser: Combines the light and laser for enhanced accuracy and visibility.
- Només làser: Activates only the green aiming laser for stealth and precision targeting.
To cycle through these modes, press and hold one of the paddle switches, then simultaneously press the other paddle switch. Release both switches to set the desired mode. The unit will remember the last selected mode.

Figure 5: The TLR-8A G Flex with its integrated green aiming laser in operation.
Laser Zeroing (Windage and Elevation Adjustment)
To ensure accurate aiming, the green laser can be adjusted for windage and elevation.
- Using the small hex wrench provided in the kit, locate the windage (side) and elevation (bottom) adjustment screws on the TLR-8A G Flex.
- Make small adjustments, turning the screws incrementally. Turn the windage screw clockwise to move the laser right, counter-clockwise to move it left. Turn the elevation screw clockwise to move the laser down, counter-clockwise to move it up.
- Test the laser's point of impact at your desired zeroing distance and continue to adjust until the laser aligns with your firearm's point of aim.
Note: Some users have reported issues with the included hex wrench size. If you experience stripping, use a high-quality 0.050" hex wrench for adjustment.
Manteniment
Canvi de bateria
When the light output diminishes or the laser becomes dim, it's time to replace the battery. Follow the battery installation steps in the "Setup" section.
- Always use fresh, high-quality CR123A batteries.
- Eliminar les bateries usades d'acord amb la normativa local.
Neteja
Keep the lens and laser aperture clean for optimal performance.
- Netegeu l'exterior de la unitat amb un damp tela.
- For the lens and laser aperture, use a lens cleaning cloth or cotton swab with a small amount of lens cleaning solution. Avoid abrasive materials.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Light/Laser does not turn on. | Battery is dead or incorrectly installed. Face cap is loose. | Replace battery, ensuring correct polarity. Tighten face cap fully. |
| Light/Laser is dim. | Low battery. Lens/aperture is dirty. | Replace battery. Clean lens and laser aperture. |
| Laser does not hold zero. | Unit is not securely mounted. Adjustment screws are loose. | Assegureu-vos rail clamp screw is tightened firmly. Re-zero the laser. |
| Cannot activate strobe mode. | Strobe feature is disabled. | Enable strobe mode by rapidly tapping either switch 9 times, holding on the 10th tap. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Streamlight |
| Número de model | 69434 |
| Tipus de font de llum | LED |
| Brillantor blanc | 500 lúmens |
| Brightness (Candela) | 5000 Candela |
| Distància del camí de la llum | 140 metres |
| Tipus làser | Green Aiming Laser (Class 3R, 510-530nm, <5mW) |
| Font d'alimentació | Funciona amb bateria |
| Tipus de bateria | 1x CR123A (included) |
| Temps d'execució (només llum) | 1.5 hores |
| Material | Alumini |
| Color | Negre |
| Dimensions del producte | 2.51 "P x 1.18" W x 1.5" H |
| Pes de l'article | 2.72 unces (0.17 lliures) |
| Nivell de resistència a l'aigua | Water Resistant (Specification Met: IPX4) |
| Tipus de muntatge | Gun Mount (Rail Clamp sistema) |
| Característiques especials | Adjustable Light Modes, Durable, High Lumens, Lightweight, Mountable |
Garantia i suport
Informació de la garantia
The Streamlight 69434 TLR-8A G Flex is covered by a Garantia limitada de per vida. This warranty covers defects in material and workmanship for the lifetime of the product, excluding batteries, bulbs, abuse, and normal wear and tear.
For full details regarding the warranty policy, please refer to the official Streamlight weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
Atenció al client
For further assistance, technical support, or warranty claims, please visit the official Streamlight weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
També podeu trobar recursos addicionals i informació sobre el producte a Streamlight Brand Store on Amazon.
A PDF version of the user guide may also be available: Guia de l'usuari (PDF).





