Contingut del paquet
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact PERLESMITH customer service.
- 1x TV cart (main frame)
- All necessary hardware (screws, washers, spacers)
- Assembly tools (Allen keys, wrench)
- Manual d'instruccions
Note: Specific screw sizes and quantities are detailed in the assembly steps.
Muntatge i muntatge
Follow these steps carefully to assemble your PERLESMITH Mobile TV Stand.
Pas 1: munta la base
Attach the support legs to the central base pole. Ensure all screws are tightened securely. The wheels should be attached to the ends of the support legs.

Image: Fully assembled PERLESMITH Mobile TV Stand, illustrating the base with wheels, central pole, laptop shelf, and TV mounting bracket.
Step 2: Install the Central Pole and Shelf
Connect the pole sections and secure them. Install the adjustable storage shelf onto the central pole at your desired height. This shelf can hold devices like laptops, streaming boxes, or game consoles.

Image: Diagram illustrating the adjustable storage shelf and its movement along the central pole.
Pas 3: Fixeu els suports de TV al televisor
Identify the correct screws and spacers for your TV's VESA mounting holes. Attach the TV brackets to the back of your television. Ensure they are level and securely fastened.

Image: Visual representation of wide TV compatibility (23"-60") and VESA patterns (100x100mm to 400x400mm) with a maximum weight of 88 lbs.
Pas 4: Munteu el televisor al suport
With assistance, carefully lift the TV and hook the brackets onto the TV plate on the stand. Secure the TV using the safety screws provided to prevent accidental dislodgement.

Image: Illustration demonstrating the three available bracket height settings for mounting the TV, indicating a maximum height of 51.22 inches.
Instruccions de funcionament
Ajust de l'alçada del televisor
The TV plate can be adjusted to different heights by repositioning the mounting brackets on the central pole. Refer to the assembly instructions for detailed steps on adjusting the TV plate height.

Image: Comparison of two TV plate height options, demonstrating the difference between using three pole sections (51.22 inches) and two pole sections (33.9 inches).
Inclinació del televisor
The TV mounting bracket allows for a 15° upward angle adjustment. Loosen the tilt knobs on the side of the TV brackets, adjust the TV to your desired viewing angle, and then securely tighten the knobs.

Image: Illustration of the TV tilt function, showing the ability to tilt the screen up by +10 degrees and down by -5 degrees for optimal viewing.
Moure el suport del televisor
The stand is equipped with rolling wheels for easy mobility. To move the stand, unlock all four wheels. Guide the stand carefully to its new location. Always ensure the path is clear of obstacles.

Image: Depiction of the TV stand's mobile flexibility, showing it being moved between rooms with an emphasis on the 360-degree swivel wheels.
Bloqueig de les rodes
To secure the TV stand in a stationary position, press down on the locking mechanism on each wheel until it clicks into place. Ensure all wheels are locked before leaving the stand unattended.
Gestió de cables
Utilize the integrated cable clips on the central pole to organize and conceal cables, maintaining a tidy appearance and preventing tripping hazards.

Image: Illustration of the two cable clips integrated into the central pole for organized cable management.
Garantia i assistència al client
PERLESMITH provides a limited warranty for this product. For detailed warranty information, product support, or to report missing/damaged parts, please contact PERLESMITH customer service. You can often find contact information on the manufacturer's weblloc web o a través de la vostra plataforma de compra.
For further assistance, please visit the official PERLESMITH weblloc web o consulteu les dades de contacte que us proporcionen amb la documentació de compra.