1. Introducció
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of the BUNN 52000.0100 ITB Automatic Tea Brewer with Infusion Series Technology. Please read this manual thoroughly before operating the appliance and retain it for future reference.
2. Informació important de seguretat
ADVERTIMENT:
- Always disconnect the brewer from the power supply before cleaning or servicing.
- Do not immerse the brewer in water or other liquids.
- Assegureu-vos d'una connexió elèctrica a terra adequada.
- Use only BUNN-approved parts and accessories.
- Keep hands and foreign objects away from hot surfaces and moving parts during operation.
- Aquest aparell està dissenyat només per a ús comercial.
3. Producte acabatview
The BUNN 52000.0100 ITB Automatic Tea Brewer is designed for efficient and consistent tea brewing in commercial settings. It features Infusion Series Technology for precise control over the brewing process.
Figura 1: Davant view of the BUNN 52000.0100 ITB Automatic Tea Brewer. This image displays the stainless steel exterior, the control panel with a digital display at the top right, the translucent tea funnel positioned below the control panel, and the drip tray with a wire rack at the base.
Components clau:
- Tauler de control: Digital display and brew buttons for programming and operation.
- Translucent Tea Funnel: Holds tea leaves during brewing.
- Peak Extraction Spray Head: Multidirectional spray for optimal tea extraction.
- Safata de degoteig: Collects excess liquid and supports serving vessels.
- Exterior d'acer inoxidable: Durable and easy to clean housing.
4. Configuració i instal·lació
- Desembalatge: Carefully remove the brewer from its packaging. Inspect for any shipping damage.
- Col·locació: Position the brewer on a stable, level surface capable of supporting its weight when full. Ensure adequate clearance for ventilation.
- Connexió d'aigua: Connect the brewer to a potable cold water supply using a dedicated shut-off valve. Ensure water pressure is within specified limits (refer to specifications). A qualified plumber should perform this connection.
- Connexió elèctrica: Plug the brewer into a properly grounded 120V/60Hz/1-ph electrical outlet (NEMA 5-15P). Verify that the circuit can handle the 14.0 amps required by the unit.
- Esbandida inicial: Before first use, run several cycles with only water to flush the system.
5. Instruccions de funcionament
Basic Brewing Process:
- Encès: Ensure the brewer is connected to power and water. The digital display will illuminate.
- Prepare Tea: Place the desired amount of tea leaves into the translucent tea funnel.
- Insert Funnel: Slide the tea funnel securely into its designated slot.
- Place Server: Position an empty tea server or dispenser on the drip tray beneath the funnel.
- Selecciona la cervesa: Use the control panel to select one of the three available brew buttons. The brewer supports two batch sizes.
- Començar la infusió: Press the selected brew button to initiate the brewing cycle. The Infusion Series Technology will manage pre-infusion and pulse brew for optimal extraction.
- Monitor: The digital display will show the brewing progress.
- Servir: Once brewing is complete, carefully remove the server and dispense tea.
Característiques de programació:
The brewer features a programmable digital display for customizing brew parameters such as digital temperature control, pre-infusion times, and pulse brew settings. Refer to the detailed programming guide (available via USB programming) for advanced customization.
6. Manteniment
Neteja diària:
- Tea Funnel: Remove and thoroughly rinse the translucent tea funnel after each use. Wash with mild detergent and warm water as needed.
- Safata de degoteig: Empty and clean the drip tray and wire rack daily.
- Exterior: Netegeu l'exterior d'acer inoxidable amb anuncisamp tela. No utilitzeu netejadors abrasius.
Manteniment periòdic:
- Desnivell: Depending on water quality, periodic deliming may be required. Consult a qualified service technician or the full service manual for instructions.
- Capçal de polvorització: Inspect and clean the Peak Extraction spray head regularly to ensure proper water flow.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Brewer not powering on | No power supply; tripped circuit breaker | Check power cord connection; reset circuit breaker |
| Sense flux d'aigua | Water supply off; clogged water line | Ensure water supply is on; check for kinks in water line; consult technician for clogs |
| Tea tastes weak | Insufficient tea leaves; incorrect brew settings | Adjust tea quantity; verify brew button settings and programming |
| Missatge d'error a la pantalla | Mal funcionament del sistema | Refer to the full service manual for specific error codes or contact BUNN customer support. |
8. Especificacions
- Model: BUNN 52000.0100 ITB
- Tipus: Automatic Tea Brewer
- Tecnologia: Sèrie Infusió
- Botons de cervesa: 3
- Mides del lot: 2
- Capçal de polvorització: Multidirectional Peak Extraction
- Característiques: Pre-infusion, Pulse Brew, Programmable Digital Display, Digital Temperature Control, USB Programming Capable
- Embut de conversió: Translucent Tea Funnel
- Exterior: Acer inoxidable
- Potència: 1.7kW, 120V/60/1-ph, 14.0 Amps
- Tipus d'endoll: NEMA 5-15P
- Certificacions: UL, NSF
- Components inclosos: Filtre
9. Atenció al client
For technical assistance, service, or to order replacement parts, please contact BUNN customer support. Always provide the model number (52000.0100) when contacting support.
Note: Servers and dispensers are sold separately and are not included with the brewer.
