Cisco 1841 Integrated Services Router User Manual

1. Introducció

The Cisco 1841 Integrated Services Router is engineered for secure, wire-speed delivery of concurrent services for small to medium-sized businesses and enterprise branch offices. This manual provides essential information for the proper setup, operation, and maintenance of your Cisco 1841 router. This product is part of the Amazon Renewed program, ensuring it has been professionally inspected and tested to function like new.

2. Contingut del paquet

Carefully unpack your Cisco 1841 router and verify that all the following items are present:

• Encaminador de serveis integrats Cisco 1841
• Cable d'alimentació
• Console Cable (typically a light blue RJ-45 to DB-9 cable)
• HWIC-1DSU-T1 Interface Card (may be pre-installed or included separately)

Figure 2.1: Cisco 1841 Router with included power and console cables.

3. Sobrecàrrega físicaview

Familiarize yourself with the various components and ports of the Cisco 1841 router.

3.1 Tauler frontal

The front panel features LED indicators that provide status information about the router's operation:

• SYS (System) LED: Indicates the overall system status.
• LED PWR (alimentació): Indica l'estat de l'alimentació.
• LED ACT (Activitat): Indicates activity on specific interfaces or system processes.

Figure 3.1: Front panel of the Cisco 1841 router with system LEDs.

3.2 Panell posterior

The rear panel contains all the primary connectivity ports and interface card slots.

Figure 3.2: Rear panel of the Cisco 1841 router, highlighting Fast Ethernet ports, console port, auxiliary port, WIC slots, and power input.

• Ports Ethernet ràpids: Used for LAN and potentially WAN connections.
• Port de la consola: RJ-45 port for direct CLI access.
• Port auxiliar: RJ-45 port for modem connection or remote console access.
• WIC Slots (Slot 1, Slot 2): Expansion slots for various interface cards, such as the HWIC-1DSU-T1.
• Entrada d'alimentació: Connector for the AC power cable.
• Interruptor d'alimentació: Per encendre o apagar el router.

4. Configuració i instal·lació

Follow these steps to properly set up your Cisco 1841 router.

1. Desembalatge i inspecció: Carefully remove all components from the packaging. Inspect the router and accessories for any visible damage.
2. Installing Interface Cards (if not pre-installed): If your HWIC-1DSU-T1 card is not pre-installed, ensure the router is powered off. Carefully insert the card into an available WIC slot (e.g., Slot 1 or Slot 2) on the rear panel. Ensure the card is seated firmly and secured with any retaining screws. Note: Do not install or remove interface cards with power applied to the router.
3. Connexió d'alimentació: Connect the provided power cable to the router's power input on the rear panel and then to a suitable power outlet.
4. Initial Console Connection: For initial configuration, connect the console cable from your computer's serial port (or a USB-to-serial adapter) to the router's console port. Configure your terminal emulation software (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
5. Connexions de xarxa:
   • Connect your WAN (Wide Area Network) cable to the appropriate interface on the router (e.g., the T1 interface on the HWIC-1DSU-T1 card or one of the Fast Ethernet ports if configured for WAN).
   • Connect your LAN (Local Area Network) devices (e.g., switches, computers) to the Fast Ethernet ports.

5. Funcionament del router

Once the router is physically set up, you can power it on and begin configuration.

1. Encès: After all connections are made, press the power switch on the rear panel to the 'On' position.
2. Observing LED Indicators: Observe the LED indicators on the front panel. The PWR LED should be solid green. The SYS LED should eventually turn solid green, indicating normal operation. Blinking ACTUAR LEDs or Link/Activity LEDs on ports indicate data transmission.
3. Accessing Cisco IOS: Once powered on, you can access the Cisco IOS command-line interface (CLI) via the console connection. After initial network configuration, you can also access the CLI remotely via Telnet or SSH.
4. Configuració bàsica: The router runs Cisco IOS. Configuration involves using CLI commands for tasks such as IP addressing, routing protocols, interface settings, security, and other network services. Consult official Cisco documentation for detailed IOS configuration guides specific to your network requirements.

6. Manteniment

Un manteniment adequat garanteix la longevitat i el rendiment òptim del vostre router.

• Neteja: Keep the router free from dust. Use a soft, dry cloth to clean the exterior. Ensure that all ventilation openings are clear and unobstructed to prevent overheating. Do not use liquid cleaners directly on the device.
• Condicions ambientals: Operate the router within its specified temperature and humidity ranges. Avoid placing it in direct sunlight, near heat sources, or in areas with excessive moisture.
• Actualitzacions de firmware: Periodically check the official Cisco support website for available IOS updates. Always follow Cisco's recommended procedures for upgrading the IOS image to ensure system stability, security, and access to new features.

7. Solució De Problemes

Aquesta secció ofereix solucions a problemes comuns que podeu trobar.

• Sense energia:
  • Verify the power cable is securely connected to both the router and a functional power outlet.
  • Check the power outlet with another device to ensure it is supplying power.
  • Ensure the power switch on the router's rear panel is in the 'On' position.
• Sense connectivitat de xarxa:
  • Check the Link/Activity LEDs on the connected ports. If no link is indicated, verify the network cables and the connected devices (e.g., modem, switch, computer).
  • Confirm IP addressing and routing configurations within Cisco IOS using the CLI.
  • Test connectivity using `ping` or `traceroute` commands from the router's CLI.
• Console Access Issues:
  • Verify the console cable connection between your computer and the router.
  • Double-check the terminal emulation software settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
  • Ensure the correct COM port is selected in your terminal software.
• System LED Status: If the SYS LED is not solid green after the router has fully booted, consult official Cisco documentation for specific error codes or LED patterns to diagnose the issue.

8. Especificacions

Key technical specifications for the Cisco 1841 Integrated Services Router:

9. Garantia i Suport

This Cisco 1841 router is an Amazon Renewed product. It is backed by the Garantia renovada d'Amazon, which provides for a replacement or refund if you are not satisfied with your purchase. For specific support regarding Cisco IOS configuration, advanced features, or network design, refer to official Cisco documentation and support resources available on the Cisco weblloc.