1. Introducció
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Nora NM2-2RWMPW M2 Mini LED Recessed Wall Wash Trim. Please read all instructions carefully before beginning installation and retain this manual for future reference.
2. Informació important de seguretat
- ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
- Totes les connexions elèctriques han de complir els codis locals i el Codi Elèctric Nacional (NEC). Si no esteu familiaritzat amb les connexions de cablejat elèctric adequades, consulteu un electricista qualificat.
- Do not install this product in wet locations. This product is ETL rated for damp només ubicacions.
- Assegureu-vos el subministrament voltage és 120 V AC.
- No intenteu modificar l'aparell. Qualsevol modificació pot anul·lar la garantia i crear un perill per a la seguretat.
- Utilitzeu ulleres i guants de seguretat durant la instal·lació.
3. Producte acabatview
The Nora NM2-2RWMPW M2 Mini LED Recessed Wall Wash Trim is designed to provide directional lighting, specifically for wall washing applications. It features a matte powder white finish and is constructed from durable die-cast aluminum. This trim is part of the M2 series and is designed for easy installation in both remodel and new construction projects without the need for a separate housing.
Característiques principals:
- No housing required, IC Air-Tight rated.
- Easy installation for remodel or new construction applications.
- Deep regressed downlight with field change reflector.
- Adjustable Gimbal for precise light direction.
- Quick disconnect cables for extended length flexibility.
- ETL rated for damp ubicacions.
Figure 1: Nora NM2-2RWMPW M2 Mini LED Recessed Wall Wash Trim (Matte Powder White). This image shows the circular trim with an angled inner surface designed to direct light, typical of a wall wash fixture.
4. Instruccions d'instal·lació
Before proceeding, ensure power is disconnected at the circuit breaker. This trim is designed for direct installation into the ceiling without a separate recessed housing.
Eines necessàries:
- Tornavís
- Pelacables
- Alicates
- Cinta mètrica
- Hole saw (appropriate size for 2-inch trim)
- Guants i ulleres de seguretat
Passos d'instal·lació:
- Apagueu l'alimentació: Locate the circuit breaker controlling the area where the trim will be installed and turn off the power. Verify power is off using a voltage provador.
- Preparació de l'obertura del sostre: Using a hole saw, cut a circular opening in the ceiling. Refer to the product specifications for the exact required diameter (typically around 2 inches for this mini trim).
- Connecteu el cablejat: Open the junction box provided with the fixture. Connect the building's electrical wires to the fixture's wires using appropriate wire connectors:
- Black wire (Live) to Black wire
- White wire (Neutral) to White wire
- Green or bare copper wire (Ground) to Green wire
- Caixa de connexions segura: Place the junction box inside the ceiling opening.
- Insert Trim: Gently push the trim into the ceiling opening. The spring clips on the sides of the trim will secure it in place against the ceiling.
- Adjust Gimbal: Once installed, adjust the internal gimbal to direct the light as desired for your wall wash effect.
- Restaura l'alimentació: Torneu a engegar l'alimentació a l'interruptor i proveu l'aparell.
5. Funcionament
The Nora NM2-2RWMPW M2 Mini LED Recessed Wall Wash Trim operates by a standard wall switch connected to the circuit. Once installed and power is restored, the light can be turned on and off using the switch. The adjustable gimbal allows for manual adjustment of the light direction to achieve the desired wall wash effect.
6. Manteniment
This LED recessed trim requires minimal maintenance. The integrated LED light source is designed for long life and does not require bulb replacement.
Neteja:
- Ensure power is turned off before cleaning.
- Wipe the exterior of the trim with a soft, dry, or slightly damp tela.
- Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. |
|
|
| La llum parpelleja. |
|
|
If troubleshooting steps do not resolve the issue, contact a qualified electrician or Nora Lighting customer support.
8. Especificacions
| Número de model: | NM2-2RWMPW |
| Marca: | Nora Il·luminació |
| Color: | Blanc en pols mat |
| Forma: | Rentat de parets |
| Material: | Alumini fos a pressió |
| Tipus de font de llum: | LED (díode emissor de llum) |
| Font d'alimentació: | Elèctric amb cable |
| Voltage: | 120 Volts |
| Tipus de muntatge: | Muntatge encastat |
| Dimensions del producte: | 2 cm de llargada x 3.13 cm d'amplada x 3.19 cm d'alçada |
| Pes de l'article: | 0.8 unces (0.05 lliures) |
| Certificacions: | ETL rated for damp ubicacions |
9. Garantia i Suport
This Nora Lighting product is covered under a Garantia limitada d'5 any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.
For warranty claims, technical support, or further assistance, please contact Nora Lighting customer service. Keep your purchase receipt as proof of purchase.
Nora Lighting Contact Information:
Please visit the official Nora Lighting website for the most current contact details and support resources: www.noralighting.com
