GENERICO CLIVET HID-P1 Controller User Manual

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of the GENERICO CLIVET HID-P1 Controller. This device is designed for managing small rooftop electronic systems and serves as a replacement for the C5110765 model. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Informació de seguretat

• Always disconnect power to the system before performing any installation, maintenance, or troubleshooting.
• La instal·lació només l'ha de dur a terme personal qualificat d'acord amb els codis i les normatives elèctriques locals.
• No exposeu el controlador a humitat, temperatures extremes ni ambients corrosius.
• Do not attempt to open or repair the unit yourself. Refer all servicing to authorized service personnel.
• Assegureu-vos que totes les connexions del cablejat estiguin ben fixades i degudament aïllades per evitar curtcircuits.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• GENERICO CLIVET HID-P1 Controller (1 unit)
• Mounting screws (if applicable, check packaging)
• Aquest manual d'usuari

4. Producte acabatview

The CLIVET HID-P1 is a compact controller designed for intuitive operation of your rooftop electronic system. It features a clear display and tactile buttons for various functions.

Figura 1: Davant view of the GENERICO CLIVET HID-P1 Controller. This image shows the device with a blank display, indicating its general appearance and button layout before activation.

Figura 2: Active display and control buttons of the GENERICO CLIVET HID-P1 Controller. The screen displays "NOVARA impianti 3S srl", indicating an operational state. Below the screen are several buttons for system control: temperature adjustment (up/down arrows), fan speed, Eco mode, mode selection (snowflake/sun), and a Clean function, along with a power button.

4.1. Controls i pantalla

• Pantalla de visualització: Shows current settings, operating mode, and system status. (Refer to Figure 2)
• Up/Down Arrows (Temperature): Ajusta la configuració de la temperatura.
• Icona del ventilador: Controls fan speed or mode.
• Botó Eco: Activa el mode d'estalvi d'energia.
• Mode Button (Snowflake/Sun): Selecciona el mode de calefacció o refrigeració.
• Botó de neteja: Initiates a cleaning cycle or function.
• Botó d'encesa: Encén o apaga la unitat.

5. Configuració i instal·lació

Before beginning installation, ensure the main power supply to the rooftop electronic system is disconnected. This controller is designed to replace the C5110765 model.

1. Desconnexió d'alimentació: Turn off the main power supply to the entire system at the circuit breaker. Verify power is off using a voltage provador.
2. Remove Old Controller: Carefully detach the existing C5110765 controller from its mounting location. Note the wiring connections before disconnecting them. It is recommended to take a photograph of the wiring for reference.
3. Connexions de cablejat: Connect the wires from the rooftop electronic system to the corresponding terminals on the new GENERICO CLIVET HID-P1 Controller. Ensure all connections are secure and match the previous setup. Refer to the wiring diagram provided with your rooftop electronic system for specific details.
4. Muntatge: Mount the new HID-P1 controller securely in the desired location using appropriate screws. Ensure it is level and firmly attached.
5. Restauració d'energia: Once installation is complete and all connections are verified, restore power to the system at the circuit breaker.
6. Engegada inicial: The controller should power on and display its initial screen (similar to Figure 2).

Nota: If you are unsure about any step, consult a qualified electrician or HVAC technician.

6. Instruccions de funcionament

This section details how to operate your GENERICO CLIVET HID-P1 Controller.

6.1. Encendre/apagar

• Premeu el botó Botó d'engegada (red button on the right, as seen in Figure 2) to turn the controller on or off.

6.2. Configuració de la temperatura

• Utilitza el Fletxa amunt i Fletxa cap avall buttons (leftmost buttons, as seen in Figure 2) to adjust the desired temperature. The current set temperature will be displayed on the screen.

6.3. Selecció del mode de funcionament

• Premeu el botó Botó de mode (snowflake/sun icon, as seen in Figure 2) to cycle through available operating modes, such as Cooling (snowflake) or Heating (sun).

6.4. Control de velocitat del ventilador

• Premeu el botó Fan Icon Button (next to temperature buttons, as seen in Figure 2) to adjust the fan speed or select an automatic fan mode.

6.5. Mode Eco

• Premeu el botó Botó Eco to activate or deactivate the energy-saving mode. This mode optimizes settings for reduced power consumption.

6.6. Clean Function

• Premeu el botó Botó de neteja to initiate a specific cleaning cycle or function, if supported by the connected rooftop electronic system. Refer to your system's manual for details on this function.

7. Manteniment

Regular maintenance ensures optimal performance and longevity of your controller.

• Neteja: Netegeu la superfície del controlador amb un drap suau i sec. Per a la brutícia resistent, utilitzeu un drap lleugerament sec.amp cloth with mild soap, then wipe dry. Do not use abrasive cleaners, solvents, or spray liquids directly onto the unit.
• Inspecció: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure the controller is securely mounted.
• Actualitzacions de programari: If applicable, refer to the manufacturer's website or your system's documentation for information on potential software updates for the controller.

8. Solució De Problemes

This section addresses common issues you might encounter with your HID-P1 controller.

9. Especificacions

10. Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or contact GENERICO customer service. Keep your proof of purchase for warranty claims.

For recycling information regarding this product, please consult local regulations for electronic waste disposal.

Information on handling broken or damaged lamps (if applicable to your connected system) can be found through relevant environmental agencies or product-specific guidelines.