Introducció
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Instruccions de seguretat
Advertències generals de seguretat d'eines elèctriques:
- Seguretat de l'àrea de treball: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra com ara canonades, radiadors, estufes i refrigeradors. Hi ha un major risc de descàrrega elèctrica si el vostre cos està connectat a terra o a terra.
- Seguretat personal: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Ús i cura de les eines elèctriques: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Manteniment: Mantenir les eines elèctriques i els accessoris. Comproveu si hi ha desalineació o enganxament de les peces mòbils, trencaments de peces i qualsevol altra condició que pugui afectar el funcionament de l'eina elèctrica.
Specific Circular Saw Safety Warnings:
- Mantingueu les mans allunyades de la zona de tall i de la fulla. No arribeu a sota de la peça de treball.
- Ajusteu la profunditat de tall to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- No utilitzeu mai rentadores o cargols de fulla danyats o incorrectes.
Producte acabatview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Components clau:
- Mànec principal: Ergonomic grip for primary control and operation.
- Nansa auxiliar: Provides additional stability and control during cutting.
- Interruptor d'encesa/apagada: Activa i desactiva el motor.
- Bloqueig de l'eix: Button used to lock the spindle for safe and easy saw blade changes.
- Protector de fulla: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Palanca d'ajust de profunditat: Mechanism for setting the desired cutting depth.
- Palanca d'ajust del bisell: Mechanism for setting the desired cutting angle for bevel cuts.
- Fulla de serra: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Adaptador d'extracció de pols: Port for connecting a dust collection system to minimize sawdust.
- Battery Pack Receptacle: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Configuració
1. Instal·lació de la bateria
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- Slide the battery pack into the receptacle until it clicks securely into place.
- Per treure-la, premeu el botó d'alliberament de la bateria i feu-la lliscar cap a fora.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Premeu i manteniu premut el botó de bloqueig del fus per evitar que la fulla giri.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Remove the outer flange and the old saw blade.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Ajust de la profunditat de tall
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Afluixeu la palanca d'ajust de profunditat.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Estrenyeu bé la palanca d'ajust de profunditat per bloquejar la configuració.
4. Ajust de l'angle del bisell
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Afluixeu la palanca d'ajust del bisell.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Instruccions de funcionament
1. Arrancada i aturada
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Fer un tall
- Secure the workpiece firmly with clamps per evitar moviments durant el tall.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Engegueu la serra i deixeu que la fulla arribi a la màxima velocitat abans d'engranar el material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Extracció de pols
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Manteniment
Neteja
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Cura de la fulla
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Emmagatzematge
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La serra no arrenca | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| La serra talla lentament o s'enganxa | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Vibració excessiva | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Mala qualitat de tall (vores rugoses, estelles) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Especificacions
- Model: Einhell TE-CS 18/165-1 Li-Solo
- Voltage: 18 V (Battery Operated)
- Velocitat sense càrrega: 4,200 min⁻¹
- Diàmetre de la fulla de serra: 165 mm
- Diàmetre del forat de l'arbre: 20 mm
- Max. Cutting Depth (90°): Aproximadament 54 mm
- Max. Cutting Depth (45°): Aproximadament 35 mm
- Pes de l'article: 2.72 kg (sense bateria)
- Material de la fulla: Acer d'alta velocitat
- Nombre de dents: 24
- Característica especial: Funcionament sense fil
- Components inclosos: Fulla de serra
- Nota: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garantia i Suport
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
