Manual d'usuari de la batedora individual NutriBullet NB50100C Pro 1000

1. Introducció

This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your NutriBullet NB50100C Pro 1000 Single Serve Blender. Please read this manual thoroughly before first use and retain it for future reference.

Figura 1.1: The NutriBullet Pro 1000 Single Serve Blender with a cup filled with ingredients and another with a blended smoothie.

2. Informació important de seguretat

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Read all instructions.

• No submergiu la base del motor en aigua o altres líquids.
• Eviteu el contacte amb les peces mòbils.
• No feu servir cap aparell amb un cable o un endoll danyats.
• Desendolleu la presa de corrent quan no estigui en ús, abans de posar o treure peces i abans de netejar.
• No utilitzar a l'aire lliure.
• No deixeu que el cable pengi de la vora de la taula o del taulell.
• No col·loqueu-lo sobre o prop d'un cremador de gas o elèctric calent, ni en un forn calent.
• Always operate the blender on a flat, stable surface.
• Do not fill ingredients past the MAX line indicated on the cup.
• Les fulles són afilades. Manipular amb cura.

3. Contingut del paquet

Your NutriBullet Pro 1000 7-piece set includes the following components:

• Base de motor de 1000 watts
• Làmina extractora
• 30 Fl Oz Cup
• Tapa per portar
• Lip Ring
• Manual d'usuari (aquest document)
• Recipe Guide (may vary by package)

Figura 3.1: Main components of the NutriBullet Pro 1000 Blender.

4. Configuració

Before first use, wash all parts except the motor base with warm soapy water. Rinse and dry thoroughly.

1. Col·loqueu la base del motor sobre una superfície neta, seca i anivellada.
2. Ensure the motor base is unplugged from the power outlet.
3. Add your desired ingredients to the NutriBullet cup. Do not exceed the MAX fill line.
4. Twist the Extractor Blade onto the cup until it is securely tightened.
5. Invert the cup and blade assembly onto the motor base. Align the three tabs on the cup with the three slots on the motor base.
6. Press down and twist the cup clockwise to activate the blending cycle.

Figura 4.1: The NutriBullet Pro 1000 motor base.

5. Instruccions de funcionament

The NutriBullet Pro 1000 features a powerful 1000-watt motor designed for efficient blending.

5.1 Blending Cycle

1. After assembling the cup and blade onto the motor base as described in Section 4, plug the power cord into a 110V electrical outlet.
2. Press down firmly on the cup and twist clockwise until the tabs lock into place. The blender will begin operating.
3. The blending cycle will run automatically for approximately 60 seconds and then shut off. For shorter blending times, simply twist the cup counter-clockwise and lift to stop.
4. Once blending is complete, twist the cup counter-clockwise and lift it off the motor base.
5. Unscrew the Extractor Blade from the cup.
6. Attach the Lip Ring or To-Go Lid to the cup if desired.

5.2 Consells per barrejar

• For best results, add liquids first, then soft ingredients, and finally harder ingredients or ice.
• If blending becomes difficult, add more liquid.
• Do not continuously blend for more than 1 minute. Allow the motor to rest for a few minutes between cycles.
• Ensure the cup is securely attached to the motor base to prevent leaks.

Figura 5.1: The NutriBullet Pro 1000 Blender prepared for operation with ingredients.

6. Neteja i Manteniment

Proper cleaning ensures the longevity and optimal performance of your NutriBullet blender.

6.1 Cleaning the Extractor Blade and Cups

• Immediately after each use, rinse the Extractor Blade and cups under warm running water.
• For a deeper clean, wash with warm soapy water using a dish brush to remove any residue.
• The cups and Extractor Blade are top-rack dishwasher safe.
• Precaució: Les fulles són afilades. Manipuleu-les amb molta cura.

6.2 Neteja de la base del motor

• Desconnecteu la base del motor abans de netejar-la.
• Netegeu la base del motor amb un anunciamp cloth. If necessary, use a mild soap.
• No submergiu la base del motor en aigua o cap altre líquid.
• Ensure the motor base is completely dry before plugging it back in or storing.

7. Solució De Problemes

If you encounter issues with your NutriBullet Pro 1000, refer to the following common problems and solutions:

8. Especificacions

9. Garantia i Suport

Your NutriBullet NB50100C Pro 1000 Single Serve Blender comes with a Garantia limitada. For specific details regarding the warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official NutriBullet weblloc.

For technical support, replacement parts, or any other inquiries, please contact NutriBullet Customer Service. Contact information can typically be found on the official NutriBullet weblloc web o a l'embalatge del producte.