HJC DKS468

HJC DKS468 Pinlock 120 Clear Anti-Fog Lens Instruction Manual

For HJC RPHA 71 Helmet Visors

1. Introducció

This manual provides essential instructions for the proper installation, usage, and maintenance of your HJC DKS468 Pinlock 120 Clear Anti-Fog Lens. The Pinlock 120 lens is designed to prevent fogging on your HJC RPHA 71 helmet visor, ensuring clear vision during various riding conditions. Please read these instructions carefully before installation and use.

2. Producte acabatview

The HJC DKS468 Pinlock 120 is a high-performance anti-fog insert specifically designed for HJC RPHA 71 helmet visors. It creates an airtight seal between the Pinlock lens and the visor, forming an insulating air pocket that prevents temperature differences from causing fogging.

Note: No relevant product images were provided in the input data for this specific Pinlock lens. The provided image was for a different product (a tablet case) and has been excluded to avoid misinformation.

Note: No relevant product videos were provided in the input data for this specific Pinlock lens.

3. Configuració i instal·lació

Follow these steps to correctly install the Pinlock 120 lens into your HJC RPHA 71 helmet visor:

  1. Prepare the Visor: Remove your helmet visor from the helmet according to your helmet's instruction manual. Ensure the visor is clean and dry.
  2. Traieu la pel·lícula protectora: Carefully peel off the protective film from both sides of the Pinlock lens. Handle the lens by its edges to avoid fingerprints.
  3. Flex the Visor: Gently flex the helmet visor flat. This will allow the Pinlock pins to align correctly with the Pinlock lens.
  4. Position the Pinlock Lens: Align the Pinlock lens with the pins on the inside of your helmet visor. The silicone bead on the Pinlock lens should face the visor.
  5. Engage the Pins: Starting from one side, carefully press the Pinlock lens onto the pins. Ensure the lens is securely seated on both pins.
  6. Comproveu el segell: Once installed, release the flex on the visor. The Pinlock lens should now be slightly curved and create a tight, airtight seal against the visor. If there are gaps, gently re-flex the visor and adjust the lens until a proper seal is achieved.
  7. Reinstall Visor: Reattach the visor to your helmet.

4. Funcionament i ús

Once installed, the Pinlock lens works automatically to prevent fogging. No special operation is required during use. For optimal performance, ensure the lens remains clean.

5. Manteniment

Proper maintenance extends the life and effectiveness of your Pinlock lens:

  • Neteja: Clean the Pinlock lens only with lukewarm water and a soft, damp cloth. Do not use abrasive cleaners, solvents, or chemical cleaning agents, as these can damage the silicone seal and the anti-fog coating.
  • Assecat: Allow the lens to air dry or gently pat it dry with a very soft, lint-free cloth.
  • Emmagatzematge: When not in use, store your helmet in a clean, dry place away from direct sunlight and extreme temperatures.
  • Substitució: The anti-fog properties of the Pinlock lens may diminish over time with wear and tear or improper cleaning. Replace the lens if you notice reduced anti-fog performance or visible damage.

6. Solució De Problemes

If you experience issues with your Pinlock lens, consider the following:

  • Boira: If fogging occurs, check the seal between the Pinlock lens and the visor. The lens might not be seated correctly on the pins, or the visor might be excessively flexed. Reinstall the lens, ensuring a tight seal.
  • Esgarrapades: Avoid wiping the inside of the Pinlock lens with rough materials or dry cloths, as this can scratch the delicate anti-fog coating. Always use a soft, damp drap per netejar.
  • Rendiment reduït: Over time, the anti-fog properties may naturally decrease. If cleaning and reinstallation do not resolve the issue, consider replacing the Pinlock lens.

7. Especificacions

CaracterísticaDetall
FabricantCascs HJC
MarcaHJC
Número de model de l'article30005409 (DKS468)
Compatible Helmet ModelRPHA 71
Pes de l'article10.6 unces
Dimensions del paquet11.81 x 11.81 x 3.94 polzades
MaterialPolycarbonate with silicone seal
ColorClar

8. Garantia i Suport

For warranty information or technical support, please refer to the official HJC Helmets weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

Official HJC Weblloc: www.hjchelmets.com

Documents relacionats - DKS468

Preview HJC RPHA 91 Motorcycle Helmet Owner's Manual and Specifications
Comprehensive owner's manual for the HJC RPHA 91 modular motorcycle helmet, covering features, specifications, installation, removal, and safety warnings.
Preview HJC RPHA 71 Motorcycle Helmet Owner's Manual - Features and Instructions
Comprehensive owner's manual for the HJC RPHA 71 motorcycle helmet, detailing features like PIM EVO Shell, ACS ventilation, HJ-40 visor, HJ-V12 sun shield, and installation/removal guides for various components.
Preview HJC V10 Motorcycle Helmet Owner's Manual - Safety, Fit, and Maintenance Guide
Comprehensive owner's manual for the HJC V10 motorcycle helmet, covering safety information, proper fitment, maintenance, replacement parts, and warranty details.
Preview HJC RPHA 1 v2 Carbon Helmet Owner's Manual
This owner's manual for the HJC RPHA 1 v2 Carbon motorcycle helmet provides comprehensive guidance on selection, proper wear, safety, maintenance, and warranty information. Essential reading for all riders.
Preview HJC RPHA 72 Owner's Manual: Safety, Features, and Maintenance Guide
Comprehensive owner's manual for the HJC RPHA 72 helmet. Learn about safety features, installation, maintenance, sizing, and warranty information. Visit hjchelmets.com for more details.
Preview HJC C71 Motorcycle Helmet Owner's Manual: Safety, Features, and Care Guide
Comprehensive owner's manual for the HJC C71 motorcycle helmet. Learn about safety, proper fit, maintenance, features like APC shell and HJ-34P visor, and warranty information from HJC.