Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your FLOMASTA 22601SX Wireless Thermostat. Please read this manual carefully before using the device to ensure proper functionality and safety. This thermostat is designed for wireless temperature control and is powered by batteries.
Producte acabatview
Figura 1: Davant view of the FLOMASTA 22601SX Wireless Thermostat. This image displays the thermostat's front face, featuring a clear LCD screen that shows the current temperature, and two arrow-shaped buttons for adjustment, along with a small 'RST' (reset) button.
Figura 2: posterior view of the FLOMASTA 22601SX Wireless Thermostat. This image shows the back of the thermostat, including the battery compartment cover, keyhole slots for wall mounting, and a label with model information (Model: 5948G, Rating: 3V dc, T45, 868MHz, Battery: 2x 1.5V LR03 or size 'AAA').
The FLOMASTA 22601SX is a wireless thermostat designed for controlling heating or cooling systems. It features an LCD display for temperature readings and settings, and simple push-button controls for adjustments. The unit is battery-powered and designed for wall mounting.
Configuració
1. Instal·lació de la bateria
- Locate the battery compartment on the rear of the thermostat (refer to Figure 2).
- Traieu la tapa del compartiment de la bateria.
- Insereix 2 x 1.5V LR03 or AAA size batteries, assegurant la polaritat correcta (+/-).
- Col·loqueu la coberta del compartiment de la bateria amb seguretat.
- The LCD display should illuminate, indicating successful battery installation.
2. Muntatge del termòstat
- Choose a suitable location for the thermostat, away from direct sunlight, drafts, or heat sources, to ensure accurate temperature readings.
- Use the keyhole slots on the back of the unit (refer to Figure 2) to mark the drilling points on the wall.
- Perfora forats i insereix tacs de paret si cal.
- Secure the thermostat to the wall using appropriate screws.
3. Pairing with Receiver (If applicable)
This product is a thermostat unit only. For wireless functionality, it requires pairing with a compatible receiver unit (not included). Please refer to the instructions provided with your receiver unit for pairing procedures. Typically, this involves pressing a pairing button on the receiver and then initiating a pairing sequence on the thermostat.
Instruccions de funcionament
1. Mostra mésview
The LCD display shows the current room temperature and the set target temperature. Indicators for heating/cooling status or battery level may also be present.
2. Ajust de la temperatura
- Utilitza el Amunt (▲) i Avall (▼) arrow buttons (refer to Figure 1) to increase or decrease the desired target temperature.
- The display will show the new target temperature briefly before reverting to the current room temperature.
- The thermostat will automatically signal the heating/cooling system to maintain the set temperature.
3. Resetting the Thermostat
If the thermostat is not responding or behaving unexpectedly, a reset may be required. Use a small pointed object (like a paperclip) to press the RST button (refer to Figure 1). This will restore the thermostat to its factory default settings.
Manteniment
1. Neteja
- Netegeu la superfície del termòstat amb un drap suau i sec.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the unit.
2. Substitució de la bateria
- When the battery low indicator appears on the display (if available), or if the display becomes dim, it's time to replace the batteries.
- Seguiu els passos d'instal·lació de la bateria que s'indiquen a la secció "Configuració".
- Always replace both batteries at the same time with new ones of the correct type (2 x 1.5V LR03 or AAA).
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o tènue. | Piles gastades o baixes. | Replace batteries with new 2 x 1.5V LR03 (AAA) batteries. |
| El termòstat no controla la calefacció/refrigeració. | Not paired with receiver, or receiver issue. | Ensure thermostat is correctly paired with its receiver. Check receiver's power and status. |
| Lectura de temperatura incorrecta. | Ubicació del termòstat afectada per corrents d'aire, llum solar directa o fonts de calor. | Relocate the thermostat to a more suitable position. |
| Els botons no responen. | Error temporal de programari. | Perform a reset using the RST button. |
Especificacions
- Model: FLOMASTA 22601SX / 5948G
- Font d'alimentació: 2 piles LR03 (AAA) d'1.5 V
- Connectivitat: Wireless (868MHz)
- Tipus de visualització: LCD or LED, Backlit
- Tipus de control: Pulsador
- Muntatge: Muntatge de paret
- Ús: Air Conditioner (General heating/cooling control)
- Característica especial: [WI-FI CONNECTIVITY] (Note: While some specifications mention Wi-Fi, the product's rear label indicates 868MHz wireless frequency, which is typically not Wi-Fi. Please verify actual connectivity features.)
Garantia i Suport
Information regarding specific warranty terms for the FLOMASTA 22601SX Wireless Thermostat is not available in the provided product details. Please refer to your purchase documentation or contact the retailer for warranty information.
For technical support or further assistance, please contact the manufacturer or your point of purchase. The label on the back of the unit (Figure 2) indicates a helpline number: 0845 230 5522 (Watersmith Uk Ltd.).
