Moukey MAMPMini 2 AmpManual d'usuari més viu

Introducció

Thank you for choosing the Moukey MAMPMini 2 Amplifier. This compact and powerful audio receiver is designed to enhance your home audio experience with versatile input options including Bluetooth 5.0, USB, AUX, and FM radio. Please read this manual carefully to ensure proper setup and operation of your device.

Característiques clau

• Compacte i potent: Small design (4.85"W x 3.05"D x 1.65"H) with 50W peak power dual-channel sound, utilizing an original AC6922A amplifier chip.
• Connectivitat Bluetooth 5.0: Upgraded Bluetooth 5.0 ensures stable connection up to 50ft with low latency, supporting speakers with 4-16 ohm impedance.
• Multiple Input Sources: Supports AUDIO (RCA), USB (up to 32G, MP3/APE/WAV/WMA formats), and wireless Bluetooth connection.
• Funció de ràdio FM: Integrated FM mode for news, music, sports, and finance.
• Comandament a distància: Infrared remote control for volume and mode adjustments. Note: Remote controls amplifier volume only, not external equipment volume, and cannot select songs in AUX mode.

Contingut del paquet

• Moukey MAMPMini 2 Ampmés viu
• Control remot
• Power Supply (DC12V/3A)
• Antena FM

Guia de configuració

1. Connexió dels altaveus

Connect your passive speakers to the "ROUT LOUT" (Left/Right Output) terminals on the rear panel of the amplifier. Ensure correct polarity (red to positive, black to negative) for optimal sound quality. The amplifier supports speakers with 4-16 ohm impedance.

Imatge: Connexions del panell posterior del Moukey MAMP2 amplifier, illustrating speaker and input ports.

2. Potència de connexió

Plug the provided DC12V/3A power supply into the "DC12/3A" port on the rear of the amplifier, then connect the power supply to a wall outlet.

3. Connexió de fonts d'entrada

La MAMP2 amplifier offers multiple ways to connect your audio sources:

• Connexió Bluetooth:

  Canvia el amplifier to Bluetooth mode using the "MODE" button. The BT indicator light will illuminate. On your device (e.g., smartphone, tablet), enable Bluetooth and search for "MAMP2". Select it to connect. A beep sound will confirm successful pairing (if speakers are connected).

  

  Imatge: The Moukey MAMP2 amplifier demonstrating wireless Bluetooth connectivity with a smartphone.
• AUX/RCA Input:

  Connect external audio sources such as DVD players, TVs, computers, or MP3 players to the "RIGHT AUDIO INPUT" and "LEFT AUDIO INPUT" RCA ports on the rear panel using an RCA cable. Switch the amplifier to AUX mode.

• Entrada USB:

  Insert a USB flash drive (maximum 32GB) containing music files (MP3, APE, WAV, WMA formats) into the USB port on the front panel. The amplifier will automatically switch to USB mode and begin playback.

• Ràdio FM:

  Extend the FM antenna located on the rear of the amplifier for better reception. Switch the amplifier to FM mode using the "MODE" button. Use the remote control to scan for stations.

  

  Image: Illustration of the extendable FM antenna on the Moukey MAMP2 amplifier, highlighting its length.

Image: A comprehensive diagram illustrating the various input (BT, RCA) and output (speakers) connection modes for the Moukey MAMP2 ampmés viu.

Instruccions de funcionament

Encès/Apagat

Rotate the "VOL/POWER" knob clockwise to turn the amplifier on. Rotate counter-clockwise until it clicks to turn off. The remote control also has an ON/OFF button.

Selecció del mode

Press the "MODE" button on the front panel or the remote control to cycle through available input modes: Bluetooth (BT), FM Radio, USB, and AUX (RCA).

Volume, Treble, and Bass Control

• Volum: Adjust the main volume using the large "VOL/POWER" knob on the front panel or the Volume +/- buttons on the remote control.
• Aguts: Use the "TREBLE" knob on the front panel to adjust high-frequency sounds.
• Baix: Use the "BASS" knob on the front panel to adjust low-frequency sounds.

Funcions de control remot

El comandament a distància per infrarojos inclòs proporciona un accés còmode a diverses funcions:

Image: Detailed layout of the Moukey MAMP2 remote control, indicating the function of each button.

• ON/OFF: Power on or off the ampmés viu.
• Mode: Switch between input modes (BT, FM, USB, AUX).
• CH-/CH+: In FM mode, navigate between radio stations.
• EQ: Adjust equalization presets (if available).
• Reproduir/pausa: Play or pause media playback (USB/Bluetooth modes).
• Anterior/Següent: Skip to the previous or next track (USB/Bluetooth modes).
• Volum +/-: Ajusteu el ampvolum del lifter.
• Botons numèrics (0-9): For direct track selection or FM frequency input (functionality may vary).

Manteniment

• Mantenir el amplifier in a dry, well-ventilated area away from direct sunlight, heat sources, and moisture.
• Netegeu la unitat amb un drap suau i sec. No utilitzeu netejadors líquids ni aerosols.
• Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
• Eviteu col·locar objectes pesats a sobre ampmés viu.

Resolució de problemes

Problemes de connexió Bluetooth

If Bluetooth is not working or the connection is unstable, try the following:

1. Assegureu-vos el amplifier is in Bluetooth mode (BT indicator light should be on). If not, press the "MODE" button to switch.
2. Turn on Bluetooth on your input device (e.g., mobile phone), search for "MAMP2", and click to connect. A beep indicates a successful connection (speakers must be connected).
3. Ensure there are no obstacles, especially metal objects, blocking the signal between your device and the ampmés viu.
4. Apagueu el amplifier, disconnect, and clear the connection from your Bluetooth transmitting device, then attempt to reconnect.

Connecting Two Devices via Bluetooth

El Moukey M.AMP2 amplifier is designed to connect to one Bluetooth device at a time. Connecting two devices simultaneously will disrupt the audio stream. Disconnect the current device before connecting another.

Connexió a un altaveu Bluetooth

La MAMP2 amplifier is a Bluetooth receiver, not a transmitter. It cannot connect to a Bluetooth speaker. Bluetooth speakers already have their own internal amplifiers, and attempting to amplify them further with another amplifier may cause damage.

Connecting an External Bluetooth Receiver

If you wish to use an external Bluetooth receiver, connect its output end to an input port on the MAMP2 amplifier, such as the 3.5mm AUX port or the RCA AUDIO INPUT ports. Ensure you use the correct port interface converter if necessary.

Especificacions

Imatge: The Moukey MAMP2 amplifier shown with its physical dimensions and a table detailing its technical specifications.

Garantia i Suport

Moukey products are designed for reliability and performance. For warranty information or technical support, please refer to the official Moukey weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Per a més ajuda, podeu visitar el Botiga Moukey a Amazon.