Zippo Windproof Lighter 250 USA Capitol Instruction Manual

Informació important de seguretat

Please read all instructions carefully before using your Zippo lighter. Failure to follow these instructions may result in injury or property damage.

• WARNING: KEEP AWAY FROM CHILDREN. This lighter is not child resistant.
• IGNITE LIGHTER AWAY FROM FACE.
• READ INSTRUCTIONS BEFORE USING.
• Do not expose to heat above 120°F (49°C) or prolonged sunlight.
• Never puncture or incinerate.
• Use only genuine Zippo lighter fluid.

Image: Bottom of the Zippo lighter showing the safety warning label. The label states: "WARNING: KEEP AWAY FROM CHILDREN. THIS LIGHTER IS NOT CHILD RESISTANT. IGNITE LIGHTER AWAY FROM FACE. READ INSTRUCTIONS BEFORE USING."

Producte acabatview

The Zippo Windproof Lighter 250 USA Capitol is a durable, all-metal lighter designed for reliable performance in various conditions. Its windproof design ensures the flame remains lit virtually anywhere. This model features a distinctive laser-lettering pattern of the USA Capitol building. It is refillable and built to provide a lifetime of use when maintained properly with genuine Zippo fluid, flints, and wicks.

Image: A Zippo Windproof Lighter 250 USA Capitol, showcasing the laser-etched design of the Capitol building and "USA" lettering on its polished chrome surface.

Configuració

Filling the Lighter with Fluid

For optimal performance, use only genuine Zippo lighter fluid.

1. Remove the inner unit from the lighter case.
2. Lift the felt pad on the bottom of the inner unit to expose the packing material.
3. Slowly saturate the packing material with Zippo lighter fluid. Do not overfill. Stop filling when the fluid reaches the top of the packing material or begins to change color.
4. Insert the inner unit back into the lighter case.
5. Wipe off any excess fluid from the lighter and your hands before igniting. Ensure the fluid container is closed and stored away from the lighter.

Substitució del sílex

A new flint is required when the lighter fails to produce a spark.

1. Remove the inner unit from the lighter case.
2. Unscrew the flint spring from the bottom of the inner unit using a small screwdriver or the edge of the lighter lid.
3. Carefully remove the old flint (if any) and the flint spring.
4. Insert a new Zippo flint into the empty flint tube.
5. Replace the flint spring and screw it in tightly. Do not overtighten.
6. Insert the inner unit back into the lighter case.

Instruccions de funcionament

Encenent l'encenedor

1. Obriu la tapa de l'encenedor.
2. Spin the flint wheel downwards with your thumb, striking it against the flint. This action will produce a spark and ignite the wick.

Apagant la Flama

1. To extinguish the flame, simply close the lid. Do not blow out the flame. The lid will cut off the oxygen supply, causing the flame to go out.

Manteniment

Substitució de metxa

Replace the wick when it becomes discolored or the lighter fails to light consistently.

1. Remove the inner unit from the lighter case.
2. Remove the flint, flint spring, and felt pad (as described in the "Replacing the Flint" section).
3. Using tweezers or small pliers, carefully pull the old wick out through the chimney hole from the top.
4. Thread a new Zippo wick through the chimney hole from the top, pulling it until the white wick is visible at the top of the chimney.
5. Bend the wick into a serpentine (S-shape) pattern within the packing material, ensuring it makes good contact with the packing material for optimal fluid absorption.
6. Substituïu el material d'embalatge, el coixinet de feltre, la pedra foguera i la molla de pedra foguera.
7. Trim the wick even with the top of the chimney.

Atenció General

• Keep the lighter clean by wiping it with a soft cloth.
• Guardeu l'encenedor en un lloc fresc i sec quan no l'utilitzeu.
• Always ensure the lid is fully closed to prevent fluid evaporation.

Resolució de problemes

• Lighter won't light:
  Check fluid level. Refill if necessary. Check flint. Replace if worn or missing. Ensure wick is properly trimmed and positioned.
• Weak or inconsistent flame:
  This often indicates low fluid or a worn wick. Refill fluid or replace the wick. Ensure the wick is properly arranged within the packing material.
• Lighter leaks fluid:
  Do not overfill. Ensure the felt pad is securely in place. If the problem persists, the packing material or felt pad may need replacement.
• Lid is loose or doesn't close properly:
  The hinge may be worn. Zippo offers repair services under its lifetime guarantee.

Especificacions

Garantia i Suport

Your Zippo Windproof Lighter is backed by Zippo's famous lifetime guarantee. If your Zippo lighter ever fails to work, regardless of its age or condition, Zippo will repair it free of charge. This guarantee covers the mechanical function of the lighter. Cosmetic damage is not covered.

For warranty service or support, please visit the official Zippo website or contact Zippo customer service directly. Do not attempt to repair complex issues yourself, as this may void the warranty or cause further damage.

Per a més informació, visiteu: www.zippo.com