1. Introducció
The Sonance Sonamp DSP 8-130 MKII is a high-performance 8-channel power amplifier designed for robust audio applications. It integrates SonARC (Sonance Advanced Room Correction) for optimized sonic performance in various environments. This manual provides essential information for the proper installation, operation, and maintenance of your ampmés viu.
2. Característiques clau
- Potència de sortida: 1160W total RMS rating of 130W x 8 channels at 8 ohms.
- SonARC (Sonance Advanced Room Correction): Features a 10-band parametric EQ for precise audio optimization.
- Eficiència: Class D design combining efficiency with high-fidelity audio.
- Muntatge en bastidor: Designed for flexible placement in standard audio racks.
- Eficiència energètica: Maintains 93% energy efficiency.
3. Configuració i instal·lació
Proper installation is crucial for the optimal performance and longevity of your Sonamp DSP 8-130 MKII amplifier. Ensure the unit is placed in a well-ventilated area, especially if rack-mounted, to prevent overheating.
3.1 Desembalatge
Traieu amb cura amplifier from its packaging. Retain all packaging materials for future transport or service needs.
3.2 Col·locació
El amplifier is designed to be rack-mountable. When installing in a rack, ensure adequate airflow around the unit. Avoid placing it near heat sources or in enclosed spaces without ventilation.
3.3 Connexions
Refer to the diagram below for a visual guide to the amplifier's front and rear panels. Ensure all connections are secure before powering on the unit.
Figura 1: Front and Rear Panels of the Sonance Sonamp DSP 8-130 MKII Amplifier. The front panel displays status indicators, while the rear panel features various input/output connections, including RCA inputs, speaker outputs, and power input.
- Entrades d'àudio: Connect your audio sources (e.g., pre-amplifier, mixer) to the RCA input jacks on the rear panel.
- Sortides dels altaveus: Connect your speakers to the appropriate speaker terminals. Observe correct polarity (+ to + and - to -) for each channel.
- Connexió d'alimentació: Connecteu el cable d'alimentació subministrat a l'entrada de CA del panell posterior i després a una presa de corrent adequada.
- Connexió de xarxa: For SonARC functionality and control, connect the amplifier to your network via the Ethernet port.
4. Instruccions de funcionament
Once all connections are made, you can power on the amplifier and begin operation.
4.1 Engegada/apagada
Press the power button on the front panel to turn the amplifier on or off. Observe the status indicators for proper operation.
4.2 SonARC (Sonance Advanced Room Correction)
El Fillamp DSP 8-130 MKII features SonARC, which allows for advanced audio customization. Access SonARC through a network connection to apply EQ presets or utilize the 10-band parametric EQ for fine-tuning the sonic performance to your specific room acoustics and speaker characteristics. Refer to the SonARC software manual for detailed instructions on configuration.
Reproducció d'àudio 4.3
Ensure your audio source is playing and the volume is set appropriately. Adjust the amplifier's volume or gain settings as needed for desired sound levels.
5. Manteniment
Un manteniment regular ajuda a garantir la longevitat i el rendiment del vostre ampmés viu.
- Neteja: Utilitzeu un drap suau i sec per netejar l'exterior ampEviteu netejadors o dissolvents abrasius.
- Ventilació: Periodically check that the ventilation grilles are free from dust and obstructions to maintain proper airflow.
- Connexions: Occasionally check all audio and power connections to ensure they remain secure.
6. Solució De Problemes
If you encounter issues with your Sonamp DSP 8-130 MKII, refer to the following common troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so |
|
|
| So distorsionat |
|
|
| Ampsobreescalfament més viu |
|
|
If the problem persists after attempting these solutions, contact Sonance customer support or a qualified technician.
7. Especificacions
The following are the technical specifications for the Sonance Sonamp DSP 8-130 MKII Ampmés viu:
- Número de model: DSP 8-130 MKII
- Marca: Sonoritat
- Nombre de canals: 8
- Potència de sortida: 130 Watts per channel at 8 ohms (8 channels driven), 1160 Watts total RMS.
- Tipus de muntatge: Surface Mount (Rack-mountable)
- Disseny: Classe D
- Característiques especials: SonARC (Sonance Advanced Room Correction) with 10-band parametric EQ.
8. Garantia i Suport
For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Sonance website. Technical support and service inquiries can also be directed to Sonance customer service.
Sonance Official Weblloc: www.sonance.com
