Glideaway King Bed Heavy Duty Low Profile Center Supports Instruction Manual

1. Producte acabatview

The Glideaway Heavy Duty Low Profile Center Support System (Model BB5K) is designed to provide robust and stable support for king-sized wooden bed frames. This system helps prevent sagging of mattresses and box springs, extending their lifespan and ensuring a comfortable sleep surface. It is specifically engineered for wooden bed frames that feature internal wooden lips.

Key features include 12 adjustable glide legs and 12 non-skid rubber grippers, ensuring comprehensive support and stability across the entire bed frame.

2. Components

Abans de començar la instal·lació, assegureu-vos que hi hagi tots els components:

• Center Support Beams (metal rails)
• Adjustable Glide Legs (12 units)
• Non-Skid Rubber Grippers (12 units)
• Maquinari de muntatge (cargols, femelles, volanderes)

Refer to the diagram below for a visual representation of the system components.

This diagram provides an overhead view of the Glideaway King Bed Center Support System, illustrating the arrangement of the main support beams and the twelve adjustable legs.

3. Guia d'instal·lació

Follow these steps to correctly install your Glideaway King Bed Center Support System:

1. Prepareu el marc del llit: Ensure your king-sized wooden bed frame is assembled and stable. The support system is designed to fit frames with internal wooden lips.
2. Assemble the Center Support Beams: Connect the metal center support beams according to the provided hardware. Ensure all bolts are securely tightened.


Un primer pla view of a bolt securing two sections of the metal center support rail. Proper tightening of these bolts is crucial for the stability and strength of the support system.

3. Attach Adjustable Glide Legs: Screw the 12 adjustable glide legs into the designated attachment points on the center support beams. Do not fully tighten them yet.

Un detallat view of one of the adjustable support legs, showing its attachment point to the metal center support beam. The leg features a threaded shaft for height adjustment and a wide base for stability.
4. Position the Support System: Carefully place the assembled center support system within your bed frame. The ends of the support beams should rest on the internal wooden lips of your headboard and footboard.
5. Ajustar l'alçada de la cama: Adjust the height of each glide leg by rotating it until it makes firm contact with the floor. Ensure the support system is level and provides even support across the bed frame. The low profile height from the floor can be adjusted between 5 and 8 inches.
6. Apply Non-Skid Grippers: Place the non-skid rubber grippers under each adjustable leg to prevent movement and protect your flooring.


This image illustrates a non-skid rubber gripper designed to be placed under the adjustable support legs. These grippers help prevent the bed from shifting and protect flooring.

7. Comprovació final: Verify that all connections are secure and all 12 legs are firmly supporting the bed frame.

This image shows the Glideaway King Bed Center Support System fully installed within a wooden bed frame. The metal support beams span the width of the bed, with multiple adjustable legs providing central support.

4. Ús

Once properly installed, the Glideaway Center Support System functions passively to provide continuous support. It is designed to distribute weight evenly, preventing the mattress and box spring from sagging. The heavy-duty construction allows it to support significant weight, up to 1100 pounds.

5. Manteniment

To ensure the longevity and continued performance of your support system, consider the following maintenance tips:

• Inspecció periòdica: Every 6-12 months, inspect all bolts and connections to ensure they remain tight. Re-tighten any loose hardware.
• Ajust de cames: Periodically check that all adjustable legs are still making firm contact with the floor and are level. Adjust as necessary.
• Gripper Condition: Inspect the non-skid rubber grippers for wear or damage. Replace if they are no longer effective at preventing movement.
• Neteja: Wipe down metal components with a dry cloth to remove dust. Avoid using harsh chemicals that could damage the finish.

6. Solució De Problemes

If you encounter issues with your Glideaway Center Support System, refer to these common problems and solutions:

• Bed Sagging:
  • Causa: Legs may not be properly adjusted or connections are loose.
  • Solució: Re-adjust all 12 glide legs to ensure firm contact with the floor and verify that all bolts on the support beams are securely tightened.
• Grinyols o sorolls:
  • Causa: Loose connections or uneven leg contact with the floor.
  • Solució: Check and tighten all hardware. Ensure each leg is evenly supporting the frame and is not wobbling.
• Bed Shifting:
  • Causa: Non-skid grippers are missing, worn, or improperly placed.
  • Solució: Ensure all 12 non-skid rubber grippers are in place under each leg and are in good condition. Replace if necessary.

7. Especificacions

8. Informació de la garantia

For specific warranty details regarding your Glideaway Heavy Duty Low Profile Center Support System, please refer to the documentation included with your purchase or contact Glideaway directly. Warranty terms typically cover manufacturing defects and material flaws for a specified period.

9. Suport

If you require further assistance, have questions about installation, or need to report an issue, please contact Glideaway customer support. You can find more information and contact details on the official Glideaway website or through their Amazon store.

Visit the official Glideaway Store: Glideaway Amazon Store