iFixit iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

iFixit Home Button Replacement Manual

Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020

1. Introducció

This manual provides detailed instructions for replacing the home button on compatible iPhone models. This replacement part restores all home button functions, excluding Touch ID functionality. Touch ID is uniquely paired to the original logic board and cannot be restored with a replacement home button.

For optimal results, it is recommended to have prior experience with small electronics repair or to seek professional assistance.

2. Informació de seguretat

Please read and understand all safety precautions before beginning the repair process.

  • Apagueu el dispositiu: Always ensure your iPhone is completely powered off before starting any repair.
  • Desconnecta la bateria: Disconnect the battery as early as possible in the repair process to prevent accidental short circuits.
  • Descàrrega estàtica: Use an anti-static wrist strap or work on an anti-static mat to prevent electrostatic discharge (ESD), which can damage sensitive electronic components.
  • Manejar amb cura: Electronic components are fragile. Handle them gently and avoid excessive force.
  • Peces petites: Keep track of all screws and small parts. Using a magnetic mat or labeled containers is highly recommended.
  • Protecció ocular: Consider wearing eye protection to guard against small flying debris.

3. Producte acabatview

The iFixit Home Button replacement part is designed to restore the physical click and home button functionality of your compatible iPhone.

Davant view of the iFixit replacement home button

Figura 3.1: Davant view of the iFixit replacement home button, showing the black circular button and the flexible circuit board.

Enrere view of the iFixit replacement home button

Figura 3.2: Enrere view of the iFixit replacement home button, revealing the internal circuitry and connector.

Característiques principals:

  • Restores home button click functionality.
  • Compatible with iPhone 7, 7 Plus, 8, 8 Plus, and SE 2020.
  • Does NOT restore Touch ID functionality.

4. Guia d'instal·lació

This section outlines the general steps for replacing the home button. Specific disassembly steps may vary slightly between iPhone models. Refer to detailed repair guides for your specific iPhone model on the iFixit weblloc (www.ifixit.com) for comprehensive, step-by-step visual instructions.

Eines necessàries (no incloses):

  • Tornavís Pentalobe
  • Tornavís Phillips
  • Tri-point screwdriver
  • Spudger
  • Seleccions d'obertura
  • Ventosa
  • Pinces
  • Heat gun or hairdryer (optional, for adhesive softening)
iFixit repair tools kit with various screwdrivers and opening tools

Figura 4.1: Example of an iFixit repair kit containing various tools necessary for electronics repair.

Passos generals d'instal·lació:

  1. Preparar l'espai de treball: Assegureu-vos un entorn net, ben il·luminat i sense electricitat estàtica.
  2. Power Off iPhone: Completely shut down your iPhone.
  3. Treure els cargols Pentalobe: Remove the two pentalobe screws located at the bottom edge of the iPhone, next to the charging port.
  4. Open Display Assembly: Carefully open the display assembly. This usually involves using a suction cup and opening picks to separate the display from the frame. Be aware of adhesive and delicate cables.
  5. Desconnecta la bateria: Locate and disconnect the battery connector to prevent power flow during the repair.
  6. Disconnect Display Cables: Disconnect all display and digitizer cables from the logic board.
  7. Remove Display Assembly: Carefully remove the entire display assembly from the iPhone body.
  8. Access Home Button: On the back of the display assembly, locate the home button bracket and screws. Remove them.
  9. Disconnect Home Button Cable: Carefully disconnect the home button flex cable from the display assembly.
  10. Remove Old Home Button: Gently remove the old home button. It may be lightly adhered.
  11. Install New Home Button: Position the new iFixit home button into place. Ensure it sits correctly and the flex cable aligns.
  12. Connect New Home Button Cable: Carefully connect the new home button flex cable.
  13. Torneu a muntar: Follow the disassembly steps in reverse order. Reconnect display cables, then the battery. Reattach the display assembly to the iPhone body and secure the pentalobe screws.
  14. Funcionalitat de prova: Power on the iPhone and test the home button functionality (single press, double press). Remember, Touch ID will not work.

5. Operating the Replacement Home Button

Once installed, the iFixit replacement home button operates identically to the original in terms of physical presses and gestures, with the exception of Touch ID.

  • Premsa única: Returns to the Home screen from any application.
  • Doble premsa: Activates the App Switcher, allowing you to view i canviar entre aplicacions obertes.
  • Triple premsa: Activates Accessibility Shortcuts (if configured in Settings > Accessibility > Accessibility Shortcut).
  • Mantén premut: Activates Siri (if enabled).

Important Note: Touch ID functionality will be permanently lost with the installation of any non-original home button. This is a security feature implemented by Apple.

6. Manteniment

The iFixit home button replacement part requires minimal maintenance once installed. However, following these general guidelines can help ensure its longevity:

  • Mantenir net: Regularly wipe the home button and surrounding area with a soft, dry, lint-free cloth to prevent dust and debris buildup.
  • Eviteu líquids: Do not expose the home button or your device to liquids, as this can cause damage to internal components.
  • Ús suau: Avoid excessive force when pressing the home button.

7. Solució De Problemes

If you encounter issues after installing the replacement home button, consider the following troubleshooting steps:

ProblemaCausa possibleSolució
Home button does not click or respond.
  • Flex cable not properly connected.
  • Home button misaligned.
  • Damaged flex cable during installation.
  • Re-open device and ensure home button flex cable is securely seated.
  • Verify home button alignment within the display assembly.
  • Inspect flex cable for tears or damage. If damaged, replacement may be necessary.
Home button feels loose or wobbly.
  • Home button bracket not securely fastened.
  • Home button not seated correctly.
  • Ensure all screws for the home button bracket are tightened.
  • Re-seat the home button into its recess on the display assembly.
Touch ID is not working.
  • Aquest és el comportament esperat.
  • The replacement home button does not restore Touch ID functionality due to Apple's security protocols.

8. Especificacions

Nom de la partHome Button Replacement
MarcaiFixit
CompatibilitatiPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone SE 2020
ColorNegre
FuncionalitatRestores home button click and navigation. Does NOT restore Touch ID.
Pes de l'article0.16 unces
ASINB086V6XCS7
País d'origenXina
Data de primera disponibilitat17 de juliol de 2020

9. Garantia i Suport

iFixit stands behind its products. For specific warranty information and support, please refer to the official iFixit weblloc.

iFixit offers a "Backed for Life" warranty on their tools and parts. This means if a tool breaks or a part is defective, they will replace it for as long as you own it.

Hands holding an iFixit screwdriver with a 'Quality Parts and Tools - Backed for Life' badge overlay

Figura 9.1: iFixit's "Backed for Life" commitment, emphasizing quality and long-term support.

For further assistance, visit the iFixit support page or community forums:

Documents relacionats - iPhone 7/7 Plus/8/8 Plus/SE 2020 Home Button

Preview Guia de substitució de la placa lògica de l'iPhone 6
Una guia pas a pas per substituir la placa lògica d'un Apple iPhone 6, que detalla les eines, les peces i els procediments necessaris per al desmuntatge i el muntatge.
Preview Guia de reparació NAND de l'iPhone X: corregir el mode de recuperació i desbloquejar dades
Una guia detallada d'iFixit i REWA sobre com desbloquejar dades NAND i reparar un iPhone X bloquejat en mode de recuperació substituint el xip d'emmagatzematge NAND. Inclou instruccions pas a pas, consells per a la resolució de problemes i les eines necessàries.
Preview Com restaurar el to veritable a l'iPhone XS després de la substitució de la pantalla
Una guia completa d'iFixit que detalla el procés de restauració de la funció de pantalla True Tone en un iPhone XS després d'una substitució de la pantalla, utilitzant un programador per transferir les dades necessàries.
Preview Guia de substitució de la targeta SIM de l'iPhone 7
Una guia pas a pas d'iFixit per substituir o treure la targeta SIM d'un Apple iPhone 7, incloent-hi les eines i les peces necessàries.
Preview Guia de substitució de la bateria del MacBook Pro de 13" amb tecles de funció de finals de 2016
Una guia pas a pas per substituir la bateria d'un MacBook Pro de 13 polzades amb tecles de funció, fabricat a finals del 2016. Aquesta guia explica com desactivar l'arrencada automàtica, treure la carcassa inferior, desconnectar la bateria i substituir-la amb instruccions detallades i precaucions de seguretat.
Preview Guia de substitució de la funda posterior del Huawei P9 - iFixit
Instruccions pas a pas d'iFixit per substituir la coberta posterior d'un telèfon intel·ligent Huawei P9. Apreneu a realitzar la reparació de manera segura i eficaç.