1. Introducció
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your SmallRig Camera Cage CCF2808, designed specifically for the FUJIFILM X-T4 camera. This aluminum alloy cage enhances the camera's protection and expands its accessory mounting capabilities.
Image 1.1: SmallRig Camera Cage CCF2808 installed on a FUJIFILM X-T4 camera.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- 1 x SmallRig Camera Cage CCF2808
- 1 x Built-in Flat Head Screwdriver (magnetically attached to the cage base)
Image 2.1: Package contents and product dimensions.
3. Configuració i instal·lació
Follow these steps to securely attach the camera cage to your FUJIFILM X-T4 camera:
- Prepara la càmera: Ensure your FUJIFILM X-T4 camera is powered off.
- Alinear la gàbia: Carefully place the camera into the cage, aligning the 1/4"-20 screw hole on the camera's base with the corresponding screw on the cage. Ensure the anti-twist pin on the cage base engages with the camera's anti-twist hole for added stability.
- Assegureu la càmera: Use the built-in flat head screwdriver, located magnetically at the bottom of the cage, to tighten the 1/4"-20 screw. Tighten until the camera is firmly secured within the cage, but do not overtighten.
Image 3.1: Detail of the secure mounting mechanism with 1/4"-20 screw and anti-twist pin.
4. Característiques i ús
The SmallRig Camera Cage CCF2808 offers various features for expanding your camera setup:
4.1 Multiple Mounting Points
The cage is equipped with multiple 1/4"-20, 3/8"-16, and ARRI locating holes for attaching a wide range of accessories such as top handles, side handles, monitor mounts, and more.
4.2 NATO Rail and Cold Shoe Mount
A NATO rail is integrated on the left side of the cage, allowing for quick attachment and detachment of NATO-compatible accessories like NATO handles. A cold shoe mount is located on the top of the cage, suitable for mounting microphones, LED lights, or other cold shoe accessories.
Imatge 4.1: acabatview of multiple mounting points on the cage.
4.3 Arca-Swiss Plate Integration
The bottom of the cage features an integrated Arca-Swiss plate, enabling quick transitions between Arca-Swiss compatible tripods and stabilizers without needing to remove the cage.
Image 4.2: Arca-Swiss plate integration for quick mounting on tripods and gimbals.
4.4 Optional Cable Clamp Adjunt
For enhanced cable management and protection, an optional dedicated HDMI & USB Cable Clamp (model BSC2809, sold separately) can be attached to the cage. This prevents accidental disconnections and damage to camera ports.
Image 4.3: Attachment point for the optional Cable Clamp BSC2809.
4.5 Disseny ergonòmic
The cage features an ergonomic design that provides a comfortable grip, improving handling during extended use.
Image 4.4: Ergonomic design for comfortable handling.
5. Manteniment
To ensure the longevity and optimal performance of your SmallRig Camera Cage CCF2808, follow these maintenance guidelines:
- Neteja: Netegeu la gàbia amb un drap suau i sec per eliminar la pols i les empremtes dactilars. Per a la brutícia persistent, utilitzeu un drap lleugerament sec.amp cloth and dry thoroughly. Avoid abrasive cleaners or solvents.
- Inspecció: Periodically check all screws and mounting points for tightness. Re-tighten if necessary to prevent accidental camera movement or damage.
- Emmagatzematge: Guardeu la gàbia en un lloc sec i net quan no l'utilitzeu.
6. Especificacions
| Atribut | Detall |
|---|---|
| Número de model | CCF2808 |
| Compatibilitat | Càmera FUJIFILM X-T4 |
| Material | Aliatge d'alumini |
| Dimensions del producte | 150.3 x 59 x 106 mm (5.91 x 2.32 x 4.17 polzades) |
| Pes net | 206 g (7.3 unces) |
| Punts de muntatge | 1/4"-20 threads, 3/8"-16 threads, ARRI locating holes, NATO rail, Cold shoe |
| Anti-twist Mechanism | 1/4"-20 screw with anti-twist pin |
| Placa d'alliberament ràpid | Integrated Arca-Swiss plate |
7. Solució De Problemes
If you encounter any issues with your SmallRig Camera Cage CCF2808, consider the following:
- Camera Movement within Cage: Ensure the 1/4"-20 screw is fully tightened and the anti-twist pin is correctly engaged.
- Problemes d'ajust dels accessoris: Verify that your accessories are compatible with the cage's mounting standards (e.g., 1/4"-20, 3/8"-16, ARRI, NATO, cold shoe).
- Difficulty Accessing Camera Controls: The cage is designed to maintain access to most camera controls. If a specific control is obstructed, double-check the camera's seating within the cage.
8. Garantia i Suport
For warranty information and customer support, please refer to the official SmallRig weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
