Manual d'usuari del pedal de doble overdrive Strymon Sunset

Introducció

The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.

Configuració

Follow these steps to properly set up your Strymon Sunset pedal:

Connexió d'alimentació: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9VDC input jack on the rear panel. Ensure the power supply meets the specified voltage i requisits actuals.
Connexió d'entrada: Connecteu la vostra guitarra o un altre instrument a IN jack on the rear panel using a standard 1/4-inch instrument cable.
Connexió de sortida: Connecteu el FORA jack on the rear panel to your amplificador o el següent pedal de la cadena de senyals utilitzant un cable d'instrument estàndard de 1/4 de polzada.
Connexions opcionals:
- Pedal d'expressió (EXP): For real-time control over parameters, connect an expression pedal to the EXP jack.
- Favorite Switch (FAV): Connect an external favorite switch to the FAV jack to recall a saved preset.

posterior view of the Strymon Sunset pedal showing input, output, power, and control jacks.

Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.

Instruccions de funcionament

The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.

A dalt view of the Strymon Sunset pedal showing all knobs, switches, and footswitches.

Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.

Controls del panell frontal

Channel A Controls:
- LEVEL A: Adjusts the output volume of Channel A.
- DRIVE A: Controls the amount of gain/overdrive for Channel A.
- TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
- A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
  - Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
  - Texas: Mid-focused, bluesy overdrive with a distinct character.
  - Aguts: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
Channel B Controls:
- LEVEL B: Adjusts the output volume of Channel B.
- DRIVE B: Controls the amount of gain/overdrive for Channel B.
- TONE B: Shapes the tonal character of Channel B.
- B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
  - 2 Stage: A classic two-stage soft-clipping overdrive.
  - Difícil: A harder clipping overdrive with increased compression and sustain.
  - JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
Pedals:
- A Footswitch: Engages or bypasses Channel A. The corresponding LED indicates its status.
- B Footswitch: Engages or bypasses Channel B. The corresponding LED indicates its status.

Interruptors del panell posterior

B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
- B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
- A+B: Channels A and B run in parallel. This allows for blending the two distinct tones.
BRIGHT Switch: A global switch that adds a subtle high-end boost to the overall output.
- +: Engages the bright boost.
- -: Disengages the bright boost.

Manteniment

To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:

Neteja: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
Emmagatzematge: Guardeu el pedal en un lloc fresc i sec, allunyat de la llum solar directa, de temperatures extremes i d'alta humitat.
Font d'alimentació: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
Connexions: Comproveu periòdicament totes les connexions dels cables per detectar desgast. Assegureu-vos que els endolls estiguin lliures de pols i deixalles.

Resolució de problemes

If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:

Problema	Causa possible	Solució
Sense so o senyal feble.	Incorrect power supply, faulty cables, incorrect connections, pedal bypassed.	Verify power supply is 9V DC center-negative and provides at least 200mA. Check all instrument cables for continuity. Ensure guitar is connected to IN and amp to OUT. Press footswitches to engage channels (LEDs should light up).
Soroll o brunzit no desitjat.	Bucle de terra, font d'alimentació defectuosa, interferències d'altres aparells electrònics.	Use an isolated power supply. Proveu una presa de corrent diferent. Move pedal away from power transformers or fluorescent lights. Comproveu si hi ha cables defectuosos.
Els LED no s'encenen.	No power, pedal malfunction.	Confirm power supply is connected and functional. Ensure power outlet is active. If problem persists, contact Strymon support.

Especificacions

Model:	Sunset Dual Overdrive
Requisit d'energia:	9V DC, Center-Negative, 200mA minimum
Format del senyal:	Analògic
Interfície de maquinari:	HP-HSC
Dimensions (L x A x A):	8 x 5 x 4 polzades (20.3 x 12.7 x 10.2 cm)
Pes:	1.34 lliures (0.61 kg)
Color:	Red, Silver
ASIN:	B0875MSLCJ
Data de primera disponibilitat:	16 d'abril de 2020

Garantia i Suport

Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

Strymon Official Weblloc: www.strymon.net

	Guia d'inici ràpid del Strymon DIG Dual Digital Delay Una guia concisa del pedal de retard digital dual Strymon DIG, que cobreix els seus controls, connexions del panell posterior i...ampla configuració per aconseguir diversos efectes de retard.
	Strymon UltraViolet VintagManual d'usuari d'eVibe Manual d'usuari complet per al Strymon UltraViolet Vintage Vibe effects pedal, covering front and rear panel controls, power-up modes, external control options (expression pedals, MIDI), MIDI specifications, factory reset, features, technical specifications, sample settings, warranty, and safety information.
	Guia d'inici ràpid de Strymon Deco V2: Saturació de cinta i pedal d'efectes Doubletracker Comença amb el Strymon Deco V2, un pedal d'efectes de saturació de cinta i doubletracker. Aquesta guia d'inici ràpid cobreix els controls, les connexions i...ampla configuració per a sons clàssics de cinta i de doble eco.
	Guia d'inici ràpid del trémolo i la reverberació Strymon Flint Una guia d'inici ràpid per al pedal d'efectes Strymon Flint Tremolo & Reverb, que detalla els seus botons, interruptors i connexions del panell posterior.
	Sortida Strymon FAIRFAX Classe A StagManual d'usuari de l'eDrive Manual d'usuari detallat per al Strymon FAIRFAX, una sortida 100% analògica de classe AtagPedal d'efectes de guitarra e drive. Aprèn sobre les seves característiques, especificacions, controls i connexions.
	Guia d'inici ràpid del reverberador Strymon blueSky Una guia d'inici ràpid per al pedal de reverberació Strymon blueSky, que detalla els seus botons, interruptors, connexions del panell posterior i altres funcions.ampconfiguració del lle.

Strymon Sunset

Strymon Sunset Dual Overdrive Pedal