Introducció
The Jebao SLW Wave Maker Flow Pump is designed to create natural wave patterns in marine reef aquariums, promoting a healthy environment for aquatic life. This manual provides essential information for the proper setup, operation, and maintenance of your SLW-10 wavemaker.
Contingut del paquet
En obrir el paquet, assegureu-vos que hi hagi tots els components següents:
- Jebao SLW Wave Maker Pump
- External Drive Controller
- Font d'alimentació
- Manual d'usuari (aquest document)
Figure 1: Complete package contents including the pump, controller, and power supply unit.
Instruccions de configuració
- Muntatge de la bomba: Position the wave maker pump inside your aquarium. The pump features a magnetic mount for easy and secure attachment to the aquarium glass. Ensure the pump is fully submerged and positioned to create optimal water flow for your tank's inhabitants and corals. The 3D big rotation angle allows adjustment of the output water direction.
Figure 2: Close-up of the pump head, illustrating its compact design.
- Connexió del controlador: Connect the pump cable to the designated port on the external drive controller. The external drive controller houses all electronic devices, ensuring longer life for the pump by keeping sensitive components away from water.
- Connexió d'alimentació: Connect the power supply to the controller, then plug the power supply into a standard electrical outlet.
- Comprovació inicial: Before powering on, ensure the pump is completely submerged in water. WARNING: Do not run the pump dry, as this can cause severe damage and void the warranty.
Instruccions de funcionament
The Jebao SLW-10 Wave Maker features an intuitive controller for various operation modes and flow adjustments.
Funcions del controlador:
- Botó d'alimentació: Use this knob to turn the pump on/off and adjust the flow intensity.
- Botó de mode: Cycle through different wave patterns and flow modes. Refer to the controller's indicators for the active mode.
- Mode d'alimentació: Activates a temporary pause in operation for feeding, allowing food to settle without being immediately drawn into filtration.
- Master/Slave Control: This unit supports wireless master and slave control, allowing synchronization with other compatible Jebao wavemakers for complex flow patterns across larger aquariums.
The SLW-10 is known for its super quiet motor, ensuring minimal disturbance to your aquatic environment. It provides a maximum flow of 4000 L/H (1065 GPH).
Manteniment
Regular maintenance ensures the longevity and optimal performance of your Jebao SLW Wave Maker.
- Cleaning the Impeller: Periodically remove the pump from the aquarium and carefully disassemble the impeller housing. Clean any accumulated algae, detritus, or calcium deposits from the impeller and its chamber using a soft brush and warm water.
- Comprovació de connexions: Ensure all electrical connections are dry and secure. Avoid exposing the controller or power supply to water.
- Inspecció general: Routinely inspect the pump and cables for any signs of wear or damage. Replace any damaged components immediately.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no funciona | No power; impeller jammed; controller issue. | Check power connections. Clean impeller. Contact support if controller is faulty. |
| Caudal reduït | Impeller dirty or obstructed; flow setting too low. | Clean impeller. Adjust flow setting on controller. |
| Soroll inusual | Impeller obstruction; pump not securely mounted. | Clean impeller. Re-secure pump mounting. |
| La bomba funciona en sec | Nivell d'aigua massa baix. | Immediately turn off pump and refill aquarium to appropriate level. Running dry will damage the pump. |
Especificacions
- Model: SLW-10
- Velocitat màxima de flux: 4000 L/H (1065 GPH)
- Potència: 24V, 10-watt
- Pump Dimensions (approx.): 1.5" x 2.25" Dia.
- Material: Ceramic (for certain components)
- Entrada d'alimentació: 24V DC
- Pes de l'article: 0.56 quilograms (1.24 lliures)
- Estil: Submergible
Garantia i Suport
The Jebao SLW-10 Wave Maker comes with a Garantia limitada de 6 mesos from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, neglect, improper installation, or running the pump dry.
For warranty claims, technical support, or further assistance, please contact Jebao customer service through your retailer or the official Jebao website. Please have your purchase receipt and product model information ready.
