1. Instruccions de seguretat
Read all instructions carefully before attempting to install this fixture. Failure to follow these instructions may result in electrical shock, fire, or other hazards.
- Tot el cablejat ha de ser realitzat per un electricista qualificat.
- Desconnecteu l'alimentació abans d'instal·lar o fer servei. Aquest aparell s'ha de cablejar d'acord amb el Codi elèctric nacional i els codis i ordenances locals aplicables.
- Es requereix una connexió a terra adequada per a la seguretat.
Precaució: Risc d'incendi
- Ensure power is OFF before installing or maintaining the fixture. No user-serviceable parts inside.
- Instal·leu el kit i el dispositiu encastats segons els codis locals.
- Do NO handle energized fixture when hands are wet, when standing in wet or damp superfícies o aigua.
- Do NO mount near flammable materials or any heat source.
- Do NO let power cords touch hot surfaces.
- Fixture is for indoor and dry location only.
2. Producte acabatview
The LEDONE 2x4 FT Surface Mount Frame Kit is designed to provide a secure and aesthetically pleasing surface mounting solution for 2x4 foot LED flat panels (edge-lit and back-lit) or troffer lights. This kit allows for installation on ceilings or walls where recessed mounting is not feasible.
Image 2.1: The LEDONE 2x4 FT Surface Mount Frame Kit components.
The frame is constructed from high-quality aluminum with a white coating, offering corrosion and oxidation resistance for durability in commercial or residential environments. The assembled dimensions are approximately 48.11 x 24.31 x 2.56 inches.
Image 2.2: Detailed dimensions of the 2x4 surface mount frame kit.
3. Instruccions d'instal·lació
This section outlines the steps for installing the LEDONE 2x4 FT Surface Mount Frame Kit. Ensure all safety precautions are followed before beginning installation.
Eines necessàries (no incloses):
- Trepant
- Tornavís
- Cinta mètrica
- Llapis
Components inclosos:
- 4 Frame pieces
- Fasteners and mounting screws
Image 3.1: Visual guide for installation steps 1 through 3.
- Muntar el marc: Assemble the four pieces of the frame together and connect them using the provided screws. Ensure the frame forms a rigid rectangle.
- Muntar el marc: Place the assembled frame onto the desired ceiling or wall surface. Mark the screw hole locations. Drill pilot holes if necessary, then secure the frame to the surface using the provided mounting screws. Ensure the frame is level and securely fastened.
- Prepare for Panel Insertion: Carefully dismantle one of the frame pieces (typically a short side) by removing its screws. This creates an opening to slide the LED panel fixture into the frame.
Image 3.2: Visual guide for installation step 4.
- Insert LED Panel and Re-attach Frame Piece: Slide the 2x4 LED panel light into the bracket through the opening created in Step 3. Once the panel is in place, re-attach the removed frame piece and secure it with screws.
The surface mount kit is suitable for LEDONE LOC-BLPL and LOC-TROF series panels, including 1x4, 2x2, and 2x4 sizes.
Imatge 3.3: Ex.ample of installed LED panels using the surface mount frame kits.
4. Manteniment
The LEDONE Surface Mount Frame Kit requires minimal maintenance. Regular inspection and cleaning will help ensure its longevity and appearance.
- Neteja: Utilitzeu un suau, damp cloth to wipe down the frame. Avoid abrasive cleaners or solvents that could damage the white coating.
- Inspecció: Periodically check all mounting screws to ensure they remain tight and secure. If any screws appear loose, tighten them carefully.
- Danys: If the frame becomes bent or damaged, it may compromise the secure mounting of the LED panel. Consider replacing damaged components.
5. Solució De Problemes
Aquesta secció tracta els problemes habituals que poden sorgir durant o després de la instal·lació.
- Frame Not Square: If the assembled frame is not perfectly square, it may be due to uneven tightening of screws or slight manufacturing variations. Ensure all screws are tightened evenly. Minor adjustments can sometimes be made by gently flexing the frame before final tightening.
- Panel Does Not Fit: Verify that the LED panel is indeed a 2x4 foot (nominal) size and compatible with surface mount kits. Ensure that one side of the frame was fully removed as per installation step 3 to allow sufficient clearance for the panel to slide in.
- Maquinari que falta: While the kit is designed to include fasteners and mounting screws, occasionally items may be missing. Contact LEDONE customer support for replacement hardware if necessary.
- Frame Appears Flimsy After Assembly: Ensure all screws connecting the frame pieces are securely tightened. The frame is designed to be rigid once fully assembled and mounted.
6. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | 2X4 SMK (Troffer & Panel) |
| Dimensions del producte (L x A x A) | 48.11 x 24.31 x 2.56 polzades (aprox.) |
| Material | Alumini |
| Tipus d'acabat | Blanc |
| Tipus de muntatge | Superfície |
| Pes de l'article | 5 lliures |
| Compatibilitat | 2x4 ft Flat Panels (Edge-lit and Back-lit), LEDONE LOC-BLPL and LOC-TROF series |
| Certificació | UL (for associated lighting fixtures, frame is a component) |
7. Garantia i Suport
LEDONE provides a 1-year limited warranty on this 2x4 inch surface mount kit. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or inquiries regarding missing components, please contact LEDONE customer service.
- Fabricant: LED One Corporation
- Telèfon: (844) LEDONE6
- Fax: 1-510-217-9461
- Weblloc: www.ledoncorp.com
