Retekess TT122 Wireless Tour Guide System

1. Introducció

The Retekess TT122 Wireless Tour Guide System is designed to facilitate clear, one-way communication for various applications such as guided tours, simultaneous interpretation, factory visits, and assistive listening. This system ensures that participants can hear the speaker clearly, even in noisy environments, with a reliable wireless connection.

It operates on a 2.4G signal transmission, offering worldwide compatibility and features 36 independent channels to prevent crosstalk between multiple groups.

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• Transmissor x 1
• Receptor x 10
• Micròfon x 1
• Auricular x 10
• Cable de càrrega USB x 11
• Manual d'anglès x 1
• Cordó x 6

3. Disseny i controls del dispositiu

Familiarize yourself with the buttons and ports on both the transmitter and receiver units.

• Pantalla de visualització: Shows channel ID, battery status, and volume level.
• "-" Button: Decreases volume, navigates down in menus, or decreases ID.
• "ON/OFF/Confirm" Button: Powers the device on/off, confirms selections.
• "+" Button: Increases volume, navigates up in menus, or increases ID.
• Jack de 3.5 mm: For connecting earphones or microphones.
• Port micro USB: Per carregar el dispositiu.

4. Configuració

4.1 Càrrega dels dispositius

Ensure all units are fully charged before first use. The battery indicator on the display shows the charging status.

1. Connect the provided USB charging cable to the Micro USB port on the transmitter/receiver.
2. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB charging base.
3. The battery indicator on the screen will show charging progress. A full charge typically takes 2-3 hours.

4.2 Fixació del cordó

To wear the device conveniently, attach the lanyard as follows:

1. Locate the lanyard hole on the top edge of the device.
2. Thread one end of the lanyard through the hole.
3. Wrap the other end of the lanyard through the loop you just created and pull to tighten.

4.3 Connecting Microphone and Earphone

Connect the microphone to the transmitter and earphones to the receivers for audio input and output.

1. Plug the 3.5mm jack of the microphone into the microphone port on the transmitter.
2. Plug the 3.5mm jack of the earphone into the earphone port on each receiver.
3. For the collar microphone, clip it to your clothing near your mouth for optimal voice pickup.

5. Instruccions de funcionament

5.1 Encès/Apagat

• Per encendre: Long press the central "ON/OFF/Confirm" button for 3 seconds on both the transmitter and receiver units.
• Per apagar: Long press the central "ON/OFF/Confirm" button for 3 seconds on both the transmitter and receiver units.

5.2 Channel Pairing (One-Button Frequency)

This feature allows all receivers to quickly synchronize to the transmitter's channel.

1. Assegureu-vos que tots els receptors estiguin encesos.
2. On the transmitter, press the "+" or "-" button to select the desired channel.
3. Long press the "+" button on the transmitter for 3 seconds. All powered-on receivers within range will automatically switch to the transmitter's channel.

5.3 Manual Channel Adjustment

You can manually change the channel of individual receivers if needed.

1. On the receiver, long press the "-" button for 3 seconds to unlock the device.
2. Press the central "ON/OFF/Confirm" button twice to enter ID change mode.
3. Use the "+" or "-" buttons to select the desired channel ID.
4. Press the central "ON/OFF/Confirm" button once to confirm the selection and exit ID change mode.

5.4 Ajust de volum

Adjust the listening volume on each receiver from 1 to 10 levels.

• Premeu el botó "+" per augmentar el volum.
• Premeu el botó "-" per baixar el volum.

5.5 One-Button Mute

The transmitter features a one-button mute function.

• In volume adjustment mode, long press the "-" button on the transmitter for 3 seconds to mute the audio transmission.
• Repeat the action to unmute.

5.6 Auxiliary Audio Input

The transmitter supports auxiliary audio input, allowing you to play music or other audio from an external device.

1. Plug one end of an auxiliary cable (not included) into the microphone jack of the transmitter.
2. Plug the other end into the audio output of your external device (e.g., computer, smartphone).
3. Play audio on your external device; the receivers will broadcast the sound.

6. Manteniment

• Mantingueu els dispositius nets netejant-los amb un drap suau i sec. Eviteu utilitzar productes químics agressius o netejadors abrasius.
• Store the units in a cool, dry place when not in use.
• Eviteu exposar els dispositius a temperatures extremes, llum solar directa o humitat.
• Regularly check charging cables and ports for any signs of damage.
• For optimal battery life, fully charge the devices before long-term storage and recharge them every 3-6 months.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

Retekess offers a three-year service for this product. For technical support, warranty claims, or further assistance, please refer to the contact information provided in your product packaging or visit the official Retekess weblloc.

FCC certified devices: TX: 2AAR8TT122; RX: 2AAR8TT122A.