1. Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your Flysky FS-i6 6-channel 2.4G AFHDS 2A Radio System, which includes the FS-i6 transmitter and the iA6 receiver. This system is designed for controlling various RC models such as fixed-wing aircraft, gliders, helicopters, and quadcopters. Please read this manual thoroughly before using the product to ensure safe and correct operation.
2. Precaucions de seguretat
- Always operate your RC model in open areas, away from people, vehicles, and obstacles.
- Ensure all batteries are fully charged before each use.
- Verify all control surfaces and motor functions are operating correctly before flight.
- Do not operate the radio system in adverse weather conditions (rain, strong winds, etc.).
- Mantingueu l'emissor i el receptor allunyats de la humitat i de les temperatures extremes.
- Aquest producte no és adequat per a nens menors de 15 anys sense la supervisió d'un adult.
3. Contingut del paquet
The standard package includes the following components:
- 1 x Flysky FS-i6 Transmitter
- 1 x Flysky FS-iA6 6CH Receiver
- 1 x Bind Plug
4. Producte acabatview
4.1 Transmitter Layout
The FS-i6 transmitter features a user-friendly layout with various controls and an LCD screen for easy monitoring and configuration.
Imatge: Davant view of the Flysky FS-i6 transmitter with key controls and features labeled, including joysticks, switches, trim buttons, and the LCD display.
The transmitter includes two main joysticks (left and right), various switches (VRA, VRB, Switch A, B, C, D), fine-tuning rods, and navigation buttons (UP, DOWN, OK, CANCEL, POWER, BIND KEY). The LCD screen displays real-time information such as model type, transmitter voltage, and receiver signal strength.
4.2 Receptor acabatview
The FS-iA6 receiver is a compact 6-channel receiver designed to work seamlessly with the FS-i6 transmitter. It features dual antennas for enhanced signal reception and stability.
Imatge: The Flysky FS-i6 transmitter shown alongside the compact FS-iA6 receiver, highlighting their relative sizes and design.
4.3 Instal·lació de la bateria
The FS-i6 transmitter requires four 1.5V AA batteries (not included) for operation. Ensure correct polarity when inserting the batteries.
Imatge: Primer pla view of the battery compartment on the back of the Flysky FS-i6 transmitter, showing the slots for four AA batteries.
5. Setup and Binding
5.1 Configuració inicial
Before powering on the transmitter, ensure all switches are in their up position and the throttle stick is in the lowest position. This prevents accidental motor activation.
5.2 Connexió del receptor
Connect the receiver to your RC model's Electronic Speed Controller (ESC) or power source. Ensure the bind cable is inserted into the B/VCC port on the receiver.
Vídeo: This video demonstrates the features of the Flysky FS-i6X transmitter and iA6B receiver, including antenna setup and general connection diagrams. While it features the i6X, the principles apply to the FS-i6 system.
5.3 Procediment vinculant
Binding is the process of linking your transmitter to your receiver. Follow these steps to bind your FS-i6 transmitter with the iA6 receiver:
- Assegureu-vos que el transmissor estigui apagat.
- Connect the bind plug to the B/VCC port on the iA6 receiver.
- Power on the receiver (e.g., by connecting it to the ESC or a separate battery). The receiver's LED should flash rapidly.
- While holding down the 'BIND KEY' button on the FS-i6 transmitter, power on the transmitter.
- The transmitter's LCD screen should display 'RXBinding...' and then 'RX Bind OK' once successful.
- Release the 'BIND KEY' button and power off both the transmitter and receiver.
- Traieu el connector de connexió del receptor.
- Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.
- After successful binding, there is no need to insert a binding wire for normal use.
Vídeo: This video provides a step-by-step demonstration of how to bind the Flysky FS-i6 RC Transmitter with the FS-iA6 Receiver, showing the physical connections and screen prompts.
6. Funcionament
6.1 Controls bàsics
The FS-i6 transmitter offers 6 channels for controlling various functions of your RC model. The primary controls include:
- Joystick esquerre: Typically controls throttle and rudder.
- Joystick dret: Typically controls aileron and elevator.
- Switches (A, B, C, D): Used for auxiliary functions such as landing gear, flaps, or flight modes.
- VR Knobs (VRA, VRB): Proportional controls for fine-tuning or additional functions.
- Botons de retallar: Used to adjust the neutral position of control surfaces.
6.2 Selecció del mode
The FS-i6 transmitter supports both Mode 1 (right throttle) and Mode 2 (left throttle) configurations. You can select your preferred mode through the transmitter's settings menu to match your flying style.
7. Especificacions
7.1 Transmitter Specifications (FS-i6)
| Característica | Especificació |
|---|---|
| Canals | 6 |
| Tipus de model | Fixed-wing/Glider/Helicopter |
| Interval de RF | 2.405-2.475 GHz |
| Ample de banda | 500 KHz |
| Banda | 142 |
| Potència de RF | Menys de 20 dBm |
| Sistema 2.4G | AFHDS 2A and AFHDS |
| Tipus de codi | GFSK |
| Sensibilitat | 1024 |
| Volum baixtage Avís | Menys de 4.2 V |
| Port DSC | PS2; Output: PPM |
| Port de carregador | No |
| Poder | 6V (4 x 1.5AA batteries) |
| Mode de visualització | Transflective STN positive type, 128 * 64 dot matrix VA72 * 39mm, white backlight |
| Mida | 174 * 89 * 190 mm |
| Pes | 392 g |
| Actualització en línia | Sí |
| Color | Negre |
7.2 Receiver Specifications (FS-iA6)
| Característica | Especificació |
|---|---|
| Canals | 6 |
| Tipus de model | Airplane / Glider / Helicopter |
| Interval de freqüència | 2.4-2.48 GHZ |
| Band Width Number | 140 |
| Potència de transmissió | Not more than 20dBm |
| Sensibilitat RX | -105 dBm |
| Sistema 2.4G | AFHDS 2A |
| Tipus de codi | GFSK |
| Longitud de l'antena | 26 mm |
| Potència d'entrada | 4.0-6.5V DC |
| Dimensió | 40 * 21 * 7 mm |
| Pes | 6.4 g |
| Color | Negre |
| i-Bus Interface | No |
| Data Acquisition Interface | No |
8. Solució De Problemes
If you encounter issues with your Flysky FS-i6 system, consider the following common troubleshooting steps:
- Sense energia: Comproveu la instal·lació de la bateria i assegureu-vos que les bateries estiguin completament carregades.
- No Link/Binding Issue: Re-perform the binding procedure carefully. Ensure the bind plug is correctly inserted and removed at the appropriate steps.
- Senyal intermitent: Check receiver antenna placement. Ensure antennas are not obstructed or damaged. Avoid operating near strong interference sources.
- Resposta de control incorrecta: Verify transmitter mode (Mode 1/2) matches your preference and model setup. Check servo connections to the receiver.
- Warning Messages on LCD: Refer to the specific warning message on the screen and consult the relevant section of this manual or Flysky's official support resources.
9. Manteniment
Proper maintenance will extend the life and performance of your radio system:
- Keep the transmitter and receiver clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the system in a cool, dry place when not in use. Remove batteries from the transmitter if storing for extended periods.
- Regularly inspect all cables and connectors for signs of wear or damage.
- Avoid exposing the LCD screen to direct sunlight for prolonged periods to prevent damage.
