Monitor Audio Bronze 200

Monitor Audio Bronze 200 Floorstanding Speaker Instruction Manual

Model: Bronze 200

Marca: Monitor Audio

Introducció

Thank you for choosing the Monitor Audio Bronze 200 Floorstanding Speakers. These speakers are designed to deliver high-fidelity audio performance for both music and home theater systems. This manual provides essential information for setting up, operating, and maintaining your speakers to ensure optimal performance and longevity.

Què hi ha a la caixa

  • 2 x Monitor Audio Bronze 200 Floorstanding Speakers
  • Outrigger Feet and Spikes (pre-attached or included for user installation)
  • Reixes de protecció

Configuració

1. Col·locació

Proper speaker placement is crucial for achieving the best sound quality. Consider the following guidelines:

  • Configuració estèreo: Col·loca els altaveus equidistants de la teva posició d'escolta principal, formant un triangle equilàter.
  • Distància des de Walls: Experiment with placing the speakers away from walls to reduce bass boom and improve soundstage.
  • Cap endins: Angle the speakers slightly inward towards the listening position to optimize imaging.

2. Connexió a un Ampmés viu

The Bronze 200 speakers feature dual binding posts, allowing for bi-wiring or bi-amping for enhanced performance. Ensure your amplifier meets the recommended power requirements of 40-120W and has a nominal impedance of 8 ohms.

  1. Apagueu el vostre ampLifer abans de fer qualsevol connexió.
  2. Connecteu el terminal positiu (+) (vermell) de l'altaveu al terminal positiu (+) del vostre ampmés viu.
  3. Connecteu el terminal negatiu (-) (negre) de l'altaveu al terminal negatiu (-) del vostre ampmés viu.
  4. If bi-wiring or bi-amping, refer to your amplifier's manual for specific instructions. Ensure the metal links between the binding posts are removed if bi-wiring/bi-amping.
posterior view of Monitor Audio Bronze 200 Floorstanding Speaker, showing the dual binding posts and bass ports.

posterior view of the Monitor Audio Bronze 200 speaker, illustrating the dual binding posts for ampconnexió de lifier.

Instruccions de funcionament

Once connected, ensure your amplifier is set to the correct input source. Start with a low volume and gradually increase it to your desired listening level. The Bronze 200 speakers are designed for a wide frequency response, providing clear highs and deep bass.

Monitor Audio Bronze 200 Floorstanding Speaker, front view without grille, showcasing the C-CAM midbass drivers and Gold Dome tweeter.

Davant view of the Monitor Audio Bronze 200 speaker without its protective grille, highlighting the C-CAM midbass drivers and Gold Dome tweeter.

The speakers come with protective grilles. It is recommended to keep them on to protect the drivers from accidental damage, especially in households with children or pets. However, for critical listening, some users prefer to remove them.

Monitor Audio Bronze 200 Floorstanding Speaker, front view with protective grille installed.

Davant view of the Monitor Audio Bronze 200 speaker with its protective grille installed.

Manteniment

To keep your speakers in optimal condition:

  • Netegeu el moble amb un drap suau i sec. Eviteu utilitzar productes de neteja o dissolvents abrasius.
  • Do not touch the speaker cones or tweeters directly.
  • Keep speakers away from direct sunlight, heat sources, and excessive moisture.

Resolució de problemes

If you experience issues with your speakers, try the following:

  • Sense so: Comproveu totes les connexions de cable entre els altaveus i el amplificador. Assegureu-vos el amplifier is powered on and set to the correct input.
  • So distorsionat: Reduce the volume. Check speaker wire connections for any loose strands or short circuits. Ensure your ampEl lifier no està sobrecarregat.
  • So desigual: Verify that both speakers are connected correctly (positive to positive, negative to negative) and that the balance settings on your amplifier are centered.

Especificacions

CaracterísticaDetall
Nom del modelBronze 200
Format del sistema2.5 vies
Resposta de freqüència (-6 dB)45 – 25,000 Hz (Free field) / 35 – 30,000 Hz (In room)
Impedància nominal8 ohms
Recomanat AmpRequisits de lifier40-120 W
Complement d'unitat d'accionament2 x 5 1/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide
Dimensions exteriors (Alt x A x P)909 x 229 x 304 mm (35 13/16 x 9 x 11 15/16") (including Outrigger Feet and Spikes)
Pes de l'article12.8 quilograms (28.2 lliures)
Tipus de muntatgeTerra de peu
MaterialDurable (high quality metal or plastic)
ColorBlack, White, Walnut, Urban Gray
Mode de sortida d'àudioEstèreo, Envoltant
Tecnologia de connectivitatXLR

Garantia i Suport

The Monitor Audio Bronze 200 Floorstanding Speakers come with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support or service inquiries, please visit the official Monitor Audio weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

Documents relacionats - Bronze 200

Preview Manual del propietari i guia de configuració de Monitor Audio Bronze Series
Manual d'usuari complet per als altaveus Monitor Audio de la sèrie Bronze, que cobreix la configuració, el cablejat, la integració de Dolby Atmos, els ports connectats, el funcionament, la garantia i les especificacions tècniques detallades de tots els models.
Preview Monitor Audio Bronze Series 7G: Excel·lència en àudio d'alta fidelitat
Descobreix els Monitor Audio Bronze Series 7G, ​​una gamma captivadora d'altaveus que combinen un disseny refinat, tecnologies acústiques avançades i un rendiment excepcional per a una experiència auditiva autèntica d'alta fidelitat.
Preview Manual de l'altaveu Monitor Audio Bronze Series 7G
Manual d'usuari complet per als altaveus Monitor Audio Bronze Series 7G, ​​que cobreix la configuració, la instal·lació, el cablejat, l'ús, la cura i les especificacions.
Preview Manual d'usuari, guia de configuració i especificacions del subwoofer Monitor Audio Bronze BRW-10
Manual d'usuari detallat del subwoofer Monitor Audio Bronze BRW-10, que inclou la introducció, les instruccions de seguretat, la configuració i el funcionament. ampControls, especificacions, garantia i declaració de conformitat CE del panell de l'amplificador.
Preview Manual del producte de la sèrie Radius de Monitor Audio
Aquest manual proporciona la configuració, el posicionament i les especificacions dels altaveus de la sèrie Radius de Monitor Audio, inclosos els models Radius 45, 90, 200, 225, 270 i Radius One.
Preview Guia d'inici ràpid de Monitor Audio Silver Series 7G
Guia d'inici ràpid per als altaveus Monitor Audio Silver Series 7G, ​​que proporciona especificacions, instruccions de desembalatge, configuració i posicionament.