Steinel 068073

Manual d'usuari del Steinel LED Strahler XLED PRO 240 S

Model: 068073

Introducció

The Steinel LED Strahler XLED PRO 240 S is a high-performance LED floodlight designed for outdoor use, featuring a 2400 motion sensor for efficient and automatic illumination. This manual provides essential information for the proper installation, operation, and maintenance of your device, ensuring optimal performance and longevity.

Steinel XLED PRO 240 S LED Floodlight, front view

Davant view of the Steinel XLED PRO 240 S LED Floodlight.

Característiques clau

Diagram showing key features of Steinel XLED PRO 240 S

Visual representation of the floodlight's key features including LED lifespan, color temperature, sensor type, range, IP rating, light sensitivity, and duration settings.

Contingut del paquet

Assegureu-vos que tots els components estiguin presents abans de començar la instal·lació:

Configuració

Installation of the Steinel LED Strahler XLED PRO 240 S requires basic electrical knowledge. If you are unsure, please consult a qualified electrician. Ensure power is disconnected at the main circuit breaker before starting installation.

  1. Lloc de muntatge: Choose a suitable outdoor location, ideally between 2.0m and 6.0m high, where the floodlight can cover the desired area without obstruction.
  2. Muntatge del suport: Securely attach the mounting bracket to the wall using the provided screws and spacers. Ensure it is level and stable.
  3. Cablejat: Connect the electrical wires (Live, Neutral, Earth) to the terminal block inside the floodlight housing. Use the sealing plugs to ensure a watertight connection.
  4. Connecteu el focus: Carefully attach the floodlight unit to the mounted bracket. Ensure it clicks securely into place.
  5. Adjust Panel: The LED panel is fully swiveling. Adjust its position to direct light to the desired area.
Diagram showing motion sensor detection range and mounting height

Illustration of the floodlight's maximum detection range (12m) and recommended mounting height (up to 6m).

Instruccions de funcionament

Once installed and powered, the floodlight will operate automatically based on its sensor settings. You can customize these settings:

  1. Dusk Sensor (Light Sensitivity): Locate the adjustment dial on the sensor unit. This dial allows you to set the ambient light level at which the floodlight will activate, ranging from 2 lx (dark) to 1000 lx (daylight). Turn the dial towards the sun icon for activation in brighter conditions, or towards the moon icon for activation only in darker conditions.
  2. Durada de la llum: Use the other adjustment dial to set how long the light remains on after motion is detected. This can be set from 10 seconds to 15 minutes.
  3. Adjusting Detection Area: The 2400 motion sensor covers a wide area. If you need to limit the detection zone (e.g., to avoid triggering by passing traffic), use the provided sensor cover plates. These can be attached to the sensor lens to block specific detection segments.
Diagram showing how to adjust the sensor detection area

Illustration of how to adjust the sensor's detection area using the cover plates.

Diagram showing the motion detection pattern around a building

Example of the motion detection pattern around a building, highlighting the wide coverage.

Manteniment

The Steinel LED Strahler XLED PRO 240 S is designed for minimal maintenance. However, regular cleaning can help maintain its appearance and performance.

Resolució de problemes

If you experience issues with your Steinel LED Strahler XLED PRO 240 S, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
La llum no s’encén.No power supply; dusk sensor set too high; faulty wiring.Check power connection; adjust dusk sensor to a lower sensitivity; verify wiring connections.
La llum es manté encesa contínuament.Dusk sensor set too low (always dark); constant motion in detection area; sensor malfunction.Adjust dusk sensor to a higher sensitivity; reduce detection area with cover plates; contact support if issue persists.
La llum s'encén sense moviment aparent.Detection area too wide; environmental factors (e.g., swaying branches, small animals).Adjust detection area using cover plates; reposition the floodlight if possible.
Light cover/panel becomes loose.Improper installation; wear and tear.Ensure all mounting screws are tightened; contact customer support for assistance.

Especificacions

CaracterísticaDetall
Número de model068073
Dimensions del producte16.1 x 18 x 22.1 cm
Pes640 grams
Consum d'energia19.3 W
Flux lluminós2124 lm
Temperatura de color3000K (blanc càlid)
Tipus de sensor de movimentinfrarojos
Angle de detecció240 0
Màx. Interval12 m
Dusk Sensor Range2 - 1000 lx
Durada de la llum10 s - 15 min
MaterialPlàstic
ColorBlanc
Mounting Required
Technical drawing with dimensions of Steinel XLED PRO 240 S

Technical drawing showing the dimensions of the floodlight in millimeters.

Garantia i Suport

Steinel stands behind the quality of its products.

Visita l'oficial Steinel Store on Amazon.

Documents relacionats - 068073

Preview Manual d'instal·lació i funcionament de STEINEL XLED PRO 240 S i XLED PRO 240
Comprehensive guide for the STEINEL XLED PRO 240 S and XLED PRO 240 LED floodlights, covering installation, electrical connections, functions, and maintenance. Learn about the features of these high-efficiency LED lights for professional and private use.
Preview STEINEL XLED CAM 2 SC Bedienungsanleitung und Installationshilfe
Umfassende Anleitung für die STEINEL XLED CAM 2 SC Sensorleuchte mit integrierter Camera und Gegensprechanlage. Enthält Installationsschritte, Bedienungshinweise und technische Daten für den sicheren Außeneinsatz.
Preview STEINEL XLED Home 2 Sèrie: LED-Flutlicht mit Bewegungsmelder – Installations- und Bedienungsanleitung
Umfassende Anleitung für die STEINEL XLED Home 2 Serie, einschließlich XLED home 2, XL, SL und Connect. Erfahren Sie mehr über Installation, Funktionen, Vernetzung und die STEINEL Smart Remote App für intelligente Außenbeleuchtung.
Preview STEINEL IS 2180-2 Infrarot-Bewegungsmelder dltageanleitung
Umfassende Installationsanleitung für den STEINEL IS 2180-2 Infrarot-Bewegungsmelder. Erfahren Sie mehr über Montage, Funktionen und technische Daten dieses hochwertigen Sensors.
Preview Guida STEINEL alla Scelta del Sensore: Soluzioni per Ogni Applicazione
Guida rapida STEINEL per la scelta del sensore e del sistema di illuminazione più idoneo per ogni applicazione. Esplora le tecnologie dei sensori e le soluzioni per diversi ambienti interni ed esterni.
Preview STEINEL IS 2180 ECO Infrarot-Beegungsmelder: Dltageanleitung
Umfassende Dl.tageanleitung für den STEINEL IS 2180 ECO Infrarot-Bewegungsmelder. Erfahren Sie alles über Installation, technische Daten und Bedienung zur automatischen Lichtsteuerung.