Introducció
Thank you for choosing the Moukey MPS2 Portable Karaoke Speaker. This versatile PA stereo system is designed for various entertainment needs, offering high-quality audio, portable design, and multiple connectivity options. Please read this manual carefully to ensure proper operation and maintenance of your device.
Image: The Moukey MPS2 portable karaoke speaker, shown with its included wired microphone and remote control. The speaker features a colorful LED light display on its front grille.
Guia de configuració
Desembalatge i càrrega inicial
- Carefully remove all components from the packaging. Ensure all items listed in the "Included Components" section are present.
- Before first use, fully charge the speaker's built-in battery for over 6 hours using the included USB charging cable. Connect the USB cable to the speaker's charging port and a compatible 5V DC power source.
Image: Visual representation of the Moukey MPS2 speaker's battery life, indicating a charging time of 6 hours and a playing time of 3-10 hours depending on usage.
Connexió del micròfon
- Insert the 3.5mm jack of the wired microphone into the "MIC IN" port on the speaker's control panel.
Image: The Moukey MPS2 speaker positioned next to its wired microphone, illustrating the 6.56 ft (approximately 2 meter) cable length for flexible use.
Instruccions de funcionament
Tauler de control acabatview
Imatge: Una imatge detallada view of the Moukey MPS2 speaker's control panel, highlighting the LED screen, volume knobs, microphone input, AUX input, TF card slot, and USB port for easy operation.
The control panel features an HD LED screen and intuitive controls for easy operation. Key controls include power switch, volume knob, microphone volume, echo control, mode selection, and media playback buttons.
Encès/Apagat
- To power on the speaker, slide the "POWER" switch to the "ON" position.
- Per apagar-lo, feu lliscar l'interruptor "POWER" a la posició "OFF".
Selecció del mode
Press the "MODE" button on the control panel or remote control to switch between available input modes:
- Bluetooth (BT): For wireless connection to smartphones, tablets, and laptops.
- AUX: For wired connection via 3.5mm audio cable.
- Ràdio FM: To listen to FM radio stations.
- Targeta USB/TF: Per reproduir àudio files from USB drives or TF (Micro SD) cards.
Image: The Moukey MPS2 speaker illustrating its support for multiple playing methods and Bluetooth devices, including Bluetooth (BT), AUX input, FM radio, and USB/TF card playback.
Emparellament Bluetooth
- Turn on the speaker and select "BT" mode. The speaker will indicate it is ready for pairing.
- Activa el Bluetooth al teu dispositiu (telèfon intel·ligent, tauleta, ordinador portàtil).
- Cerca "Moukey MPS2" (or similar name) in your device's Bluetooth settings and select it to pair.
- Once paired, you can play audio wirelessly through the speaker.
Ús del micròfon
- Ensure the microphone is securely connected to the "MIC IN" port.
- Adjust the "MIC.VOL" knob on the control panel to control the microphone's volume.
- Use the "ECHO" knob to add or reduce echo effect to the microphone's output.
Llums de DJ
The speaker is equipped with colorful LED DJ lights. These lights automatically activate when the speaker is powered on, enhancing the party atmosphere.
Manteniment
- Neteja: Feu servir un drap suau i sec per netejar l'exterior de l'altaveu. No utilitzeu netejadors líquids ni materials abrasius.
- Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu l'altaveu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria: Per allargar la durada de la bateria, eviteu descarregar-la completament amb freqüència. Torneu a carregar l'altaveu regularment, fins i tot si no l'utilitzeu constantment.
- Manipulació: Handle the speaker with care. Avoid dropping or subjecting it to strong impacts.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense poder | La bateria està esgotada. | Carregueu l'altaveu durant almenys 6 hores. |
| Sense so | Volume is too low or muted. Incorrect input mode selected. Device not properly connected. | Increase the volume. Press "MODE" to select the correct input. Reconnect Bluetooth device or AUX cable. |
| El micròfon no funciona | Microphone not connected properly. Microphone volume is too low. | Ensure microphone is fully inserted into "MIC IN" port. Adjust "MIC.VOL" knob. |
| Connexió Bluetooth inestable | Device is too far from the speaker. Interference from other devices. | Move the device closer to the speaker. Avoid placing speaker near strong electromagnetic sources. |
Especificacions
| Característica | Detall |
|---|---|
| Model | MPS2 |
| Número de part | MK0141-EUA |
| Mida de l'altaveu | 6.5 inches (Subwoofer) |
| Potència de sortidatage | 10 watts |
| Connectivitat | Bluetooth 5.0, AUX (3.5mm Jack), USB, TF Card |
| Font d'alimentació | Funciona amb bateria (recarregable) |
| Voltage | 5 volts (CC) |
| Battery Life (Max Volume) | Fins a 4.5 hores |
| Temps de càrrega | Més de 6 hores |
| Longitud del cable del micròfon | 5.64 peus (aprox. 1.72 metres) |
| Dimensions del producte | 34.5 x 25.5 x 17 cm (13.6 x 10 x 6.7 polzades) |
| Pes | 2.7 kg (5.95 lliures) |
| Components inclosos | Remote Control, VHF Wired Microphone, USB Charging Cable |
Imatge: Una explosió view diagram of the Moukey MPS2 speaker, highlighting its 6.5-inch subwoofer and providing key dimensions: 13 inches (33 cm) height, 6.2 inches (15.7 cm) depth, and 9 inches (22.9 cm) width.
Garantia i Suport
For warranty information and technical support, please refer to the official Moukey weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Visit the official Moukey Store: Botiga Moukey a Amazon
