Introduction to the Hubsan Zino 2+ Drone
The Hubsan Zino 2+ is a high-performance GPS RC drone equipped with a 4K 60fps camera and a 3-axis gimbal, designed for both aerial photography and recreational flight. It offers advanced features such as 10KM FPV transmission, extended flight time, and intelligent flight modes to enhance your flying experience.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Hubsan Zino 2+ drone. Please read it thoroughly before your first flight.
Figure 1: The Hubsan Zino 2+ drone package contents, including the drone, remote control, two batteries, a carrying bag, and a set of lens filters.
Guia de configuració
1. Desembalatge i identificació de components
Traieu amb cura tots els components de l'embalatge. Verifiqueu que hi hagi tots els elements que s'enumeren a continuació:
- ZINO 2 RC Drone
- Control remot
- 2 x Blade sets (total 8 blades)
- 2 x Blade Screws
- Carregador
- Tornavís
- Remote Control USB Charging Cable
- Battery (3800mAh 4s)
- Manual d'anglès
Figure 2: All included components of the Hubsan Zino 2+ drone, neatly arranged for inspection.
2. Càrrega de la bateria
Before initial use, fully charge the drone battery and the remote control. The intelligent charger supports charging up to three batteries simultaneously. The drone battery can also function as a power bank for external power supply.
- Connecteu el carregador a una presa de corrent.
- Connect the drone battery(ies) to the charger.
- Connecteu el comandament a distància al carregador amb el cable de càrrega USB.
- Monitor the charging indicators until all batteries are fully charged.
3. Instal·lació de l'hèlix
Attach the propellers to the drone arms using the provided screws and screwdriver. Ensure propellers are securely fastened and correctly oriented according to the markings on the drone and propellers.
Figure 3: The Hubsan Zino 2+ drone with its arms and propellers unfolded, ready for flight.
The drone features a foldable design for portability. When preparing for flight, gently unfold the arms until they lock into place. For storage, fold the arms back into the compact position.
Figure 4: The Hubsan Zino 2+ drone in its folded, compact state, ideal for transport.
Instruccions de funcionament
1. Llista de verificació prèvia al vol
- Assegureu-vos que les bateries del dron i del comandament a distància estiguin completament carregades.
- Verify propellers are securely attached and undamaged.
- Check that the 3-axis gimbal is free from obstructions and moves smoothly.
- Seleccioneu una zona oberta i clara per al vol, allunyada d'obstacles, persones i espai aeri restringit.
- Power on the remote control, then the drone.
- Connect your mobile device to the remote control and launch the companion app for real-time FPV and flight data.
Figure 5: The remote control for the Hubsan Zino 2+ drone, showing its integrated display and control sticks.
2. Calibration and GPS Lock
Perform compass and IMU calibration as instructed by the app before each flight, especially when flying in a new location. Wait for a strong GPS signal lock (GPS+GLONASS+OPTICAL positioning) before takeoff to ensure stable flight and accurate return-to-home functionality.
3. Enlairament i aterratge
- Enlairament automàtic: Use the one-key takeoff function in the app or on the remote control. The drone will ascend to a safe hovering altitude.
- Enlairament manual: Push both control sticks down and outwards to start the motors, then slowly push the left stick up to ascend.
- Aterratge automàtic: Use the one-key landing or Return Home (RTH) function. The drone will return to its takeoff point and land automatically.
- Aterratge manual: Slowly pull the left stick down to descend. Ensure the landing area is clear.
4. Flight Modes and Intelligent Functions
The Hubsan Zino 2+ offers various intelligent flight modes:
- Mode sense cap: Simplifies flight by eliminating the need to orient the drone relative to the pilot.
- Image Tracking: The drone will automatically follow a selected subject.
- Orbiting: The drone will circle a point of interest.
- panorama: Captures multiple images to stitch into a wide panoramic shot.
- Hiperlapse: Creates dynamic time-lapse videos.
- Captura de poca llum: Optimized settings for improved performance in low light conditions.
- Vision Auxiliary Landing: Assists with precise landings.
Video 1: A sample video demonstrating the 4K 60fps camera capabilities of the Hubsan Zino 2+ drone, showcasing aerial footage in various environments.
Manteniment
1. Post-Flight Inspection
- Inspect propellers for any cracks, bends, or debris. Replace damaged propellers immediately.
- Check the drone body and landing gear for any signs of damage.
- Ensure the gimbal and camera are clean and free from dust or dirt.
- Verify battery contacts are clean and free of corrosion.
2. Cura i emmagatzematge de la bateria
- Guardeu les piles en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Do not fully discharge batteries for long-term storage; maintain a charge level of approximately 50-60%.
- Avoid overcharging or over-discharging batteries.
3. Actualitzacions de firmware
Regularly check for and install firmware updates via the companion app. Updates often include performance improvements, bug fixes, and new features.
Resolució de problemes
Problemes comuns i solucions:
- El dron no s'encén: Ensure battery is fully charged and correctly inserted. Check for any physical damage to the battery or drone.
- Loss of signal/connection: Ensure remote control is fully charged. Fly within the specified 10KM FPV range. Avoid areas with strong electromagnetic interference. Re-pair the drone and remote control if necessary.
- Unstable flight/drifting: Perform compass and IMU calibration. Ensure GPS lock is acquired before takeoff. Check propellers for damage or incorrect installation.
- Poor camera quality: Ensure the camera lens is clean. Check camera settings in the app (resolution, bitrate). Verify sufficient lighting conditions.
- Problemes de connectivitat de l'aplicació: Ensure your mobile device's operating system is up to date. Reinstall the app if problems persist. Check USB cable connection between mobile device and remote control.
For persistent issues, contact Hubsan customer support or refer to the official Hubsan weblloc web per obtenir guies detallades per a la resolució de problemes.
Especificacions
| Característica | Detall |
|---|---|
| Marca | HUBSAN |
| Nom del model | HUBSAN ZINO 2 PLUS |
| Interval d'edat (descripció) | Adult (Manufacturer recommended age: 14 - 14 years) |
| Color | Blanc |
| Resolució de captura de vídeo | 3840*2160 4K (Max Bitrate: 60Mbps) |
| Tecnologia de connectivitat | USB, Wi-Fi |
| Nivell d'habilitat | Intermedi |
| Pes de l'article | 910 grams (2.01 lliures) |
| Capacitat de la bateria | 3800 milionsamp Hours (4s battery) |
| Format de captura de vídeo | MP4 |
| Tipus de control | Control remot |
| Tipus de suport | SD |
| Material | Plàstic |
| Composició de les cèl·lules de la bateria | Ió de liti |
| Resolució de sortida de vídeo | 1280x720 Pixels (FPV) |
| Tecnologia de sensors òptics | CMOS (Sony 1/2.3 inch) |
| Max FPV Distance | 10 KM (Remote Control), 8 KM (Image Transmission) |
| Temps de vol | Up to 33 minutes (cruising), 31 minutes (hovering) |
Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the official HUBSAN weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.
Components inclosos: 2 x Blade, 2 x Blade Screw, Battery, Charger, English Manual, Remote Control, Remote Control USB Charging Cable, Screwdriver, ZINO 2 RC Drone.
