1. Introducció
This user manual provides comprehensive instructions for the Bewinner Digital Satellite Finder. It is designed to assist you in setting up, operating, and maintaining your device to ensure optimal performance. Please read this manual thoroughly before using the product.
2. Característiques del producte
- In-line sensitive meter with built-in amplifier to compensate for insertion loss.
- LNB to REC connector with level control for ease of use.
- Disseny compacte i lleuger per a la portabilitat.
- Durable construction using high-quality materials for long-term use.
- Digital display for signal strength indication.
Imatge: Frontal view of the Bewinner Digital Satellite Finder, showing the digital display and connection ports.
Image: Diagram illustrating the main components of the satellite finder, including LNB input, Receiver output, digital screen, key buttons, and speaker.
3. Contingut del paquet
Si us plau, verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x Bewinner Digital Satellite Finder (Model: B088RH8JZ1)
- 1 x Manual d'usuari (aquest document)
4. Configuració
Follow these steps to set up your Digital Satellite Finder:
- Connexió a l'LNB: Connect the cable from your LNB (Low Noise Block) on the satellite dish to the "Satellite" input port on the finder.
- Connectar al receptor: Connect a coaxial cable from the "Receiver" output port on the finder to your satellite receiver.
- Encès: Ensure your satellite receiver is powered on. The finder will receive power directly from the receiver via the coaxial cable.
Imatge: Primer pla view of the F-type coaxial connector on the satellite finder, used for connecting to the LNB and receiver.
5. Instruccions de funcionament
The Digital Satellite Finder assists in aligning your satellite dish for optimal signal reception.
5.1 Signal Strength Indication
- The digital display will show a numerical value representing the signal strength. Higher numbers indicate a stronger signal.
- The built-in buzzer will emit an audible tone. The pitch and frequency of the tone will increase as the signal strength improves.
Image: Close-up of the digital display on the satellite finder, showing a two-digit signal strength reading.
5.2 Adjusting Signal Sensitivity (ATT)
- If the signal is too strong and the meter is maxed out, use the "ATT" (Attenuation) buttons (◀ i ▶) to decrease the sensitivity. This allows for more precise adjustments.
- If the signal is too weak, increase the sensitivity using the "ATT" buttons.
Imatge: Primer pla view of the control buttons on the satellite finder: BUZZER (mute), RESET, and ATT (attenuation) adjustment buttons.
5.3 Control del timbre
- Press the "BUZZER" button to toggle the audible tone on or off.
5.4 Funció de reinici
- Press the "RESET" button to reset the signal strength reading and sensitivity settings.
5.5 Dish Alignment
Slowly adjust the azimuth and elevation of your satellite dish while observing the signal strength on the finder. Aim for the highest possible reading and the highest pitch from the buzzer. Once the optimal signal is achieved, tighten your dish mounting bolts.
6. Manteniment
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu netejadors líquids ni materials abrasius.
- Emmagatzematge: Store the satellite finder in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Connexions: Ensure all coaxial connections are clean and securely tightened to prevent signal loss.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense pantalla/Sense alimentació | Incorrect connection; Receiver not powered; Faulty cable. | Ensure cables are correctly connected to LNB and receiver. Verify receiver is powered on. Check coaxial cables for damage. |
| Low or no signal reading | Dish not aligned; Obstruction; LNB issue; Cable issue. | Adjust dish alignment slowly. Check for obstructions (trees, buildings). Inspect LNB and cables for damage. |
| Signal reading is always maxed out | Signal too strong. | Use the "ATT" buttons to decrease the sensitivity of the finder. |
| El timbre no funciona | Buzzer muted; Device malfunction. | Press the "BUZZER" button to unmute. If still not working, contact support. |
8. Especificacions
| Característica | Especificació |
|---|---|
| Model | B088RH8JZ1 |
| Marca | Guanyador |
| Interval de freqüència | 950-2150 MHz |
| -40 ~ -10dBm | Input Level Range |
| Impedància | 75Ω |
| Guanyar | ≥10 dB |
| Font d'alimentació | 13-18V DC (from receiver) |
| Temperatura de funcionament | 0 ~ 40 °C |
| Pes de l'article | 2.39 unces |
Image: The satellite finder shown alongside its key technical specifications.
9. Garantia i Suport
Bewinner is committed to providing quality products. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Bewinner weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
For further assistance, you may contact Bewinner customer service through the platform where you purchased the product.
