SP TOOLS SP61065 12V Automotive Battery Tester Instruction Manual

Introducció

The SP TOOLS SP61065 12V Automotive Battery Tester with Integrated Printer is a professional-grade diagnostic tool designed for comprehensive testing of various automotive batteries and charging systems. This device provides accurate and rapid analysis of battery health, cranking performance, and charging system efficiency, making it an essential tool for automotive professionals and enthusiasts.

Les característiques clau inclouen:

Suitable for all 12V car starter batteries: ordinary lead, AGM flat plate, AGM spiral, GEL, and EFB.
Tests based on CA, CCA, BCI, MCA, JIS, SAE, GB, DIN, and IEC standards.
Accurately tests low voltage batteries without full charge.
Displays cold start-up capacity and battery health percentage.
Tests vehicle start system (start time, voltage, condition).
Tests vehicle charging system (load voltage, descàrrega voltage, ripple state, status).
Built-in printer for instant test results.

Configuració

Before using the SP61065 Battery Tester, ensure the battery terminals are clean and free of corrosion to guarantee accurate readings. Follow these steps for proper connection:

Assegureu-vos que el contacte del vehicle estigui apagat i que tots els accessoris estiguin apagats.
Clean the battery terminals if there is any corrosion or dirt.
Connecteu el vermell positiu (+) clamp to the positive battery terminal. Ensure a firm, direct connection to the battery post, not just the terminal clamp.
Connecteu el negre cl negatiu (-)amp to the negative battery terminal. Ensure a firm, direct connection to the battery post.
El provador s'encén automàticament un cop connectat.

For a visual guide on connecting the battery tester and performing initial tests, please refer to the video below:

Video: SP61065 Features and Benefits. This video demonstrates the proper connection of the battery tester to a vehicle battery, followed by a detailed walkthrough of the battery, cranking, and charging tests.

SP TOOLS SP61065 Battery Tester with clamps connected to a battery

Image: The SP61065 Battery Tester with its red and black clamps, ready for connection to a vehicle battery. The device features a clear LCD screen and intuitive button layout.

En funcionament

1. Prova de la bateria

This test assesses the overall health and charge level of the battery.

Al menú principal, seleccioneu 1. Prova de la bateria.
Seleccioneu el tipus de bateria (per exemple, normal inundada, AGM de placa plana, AGM espiral, GEL, EFB).
Select the input standard (e.g., CCA).
Enter the rated Cold Cranking Amps (CCA) of your battery. The tester supports 100-2000 CCA.
Press Enter to begin testing. The results will display battery health, charge, internal resistance, and rated CCA.

SP TOOLS SP61065 Battery Tester connected to a car battery in an engine bay

Image: The SP61065 Battery Tester connected to a car battery within the engine bay, displaying test results on its screen.

2. Prova d'arrencada

This test evaluates the vehicle's starting system performance.

Al menú principal, seleccioneu 2. Prova d'arrencada.

The tester will prompt you to

Documents relacionats - SP61065

	SP61009 Battery Load Tester Digital Display User Manual User manual for the SP61009 Battery Load Tester / System Analyser by SP Tools. Provides instructions for battery testing, load testing, cranking voltage testing, charging voltage testing, and maintenance.
	SP Tools SP62042 Professional Timing Light User Manual This user manual provides detailed instructions for operating, maintaining, and troubleshooting the SP Tools SP62042 Professional Timing Light. Learn about its features, specifications, safety precautions, and warranty information.
	SP61150 OBDII/EOBD Scanner Code Reader User Manual \| SP Tools Comprehensive user manual for the SP61150 OBDII/EOBD Scanner Code Reader by SP Tools. Learn about features, specifications, operating instructions, safety, and warranty.
	SP Tools SP61155 OBDII/EOBD/JOBD Scanner User Manual User manual for the SP Tools SP61155 OBDII/EOBD/JOBD Scanner. Learn how to connect, operate, and utilize diagnostic features for vehicle emission control systems.
	SP Tools SP61071 Li+ Power Bank Jump Starter 700A User Manual User manual for the SP Tools SP61071 Li+ Power Bank Jump Starter 700A, detailing its features, operation, safety precautions, and warranty information for jump-starting vehicles and charging electronic devices.
	SP Tools SP61082 8 Stagi 10 Amp Manual d'usuari del carregador de bateria intel·ligent Comprehensive user manual for the SP Tools SP61082 8 Stagi 10 Amp Smart Battery Charger. Covers introduction, intended use, operation, charging stages, safety, technical specifications, and limited warranty for 12V lead-acid, AGM, Gel, and Calcium batteries.

SP Tools SP61065