Introducció
The Browning Solar Battery Pack 12 Volt (Model BTC SBP12) is designed to provide supplemental power to your Browning Trail Camera, extending its operational life in the field. This unit features an integrated solar panel that recharges its internal batteries, which then supply power to your connected trail camera. It is compatible with all Browning Trail Camera models and includes six rechargeable batteries for immediate use.
Informació de seguretat
ADVERTÈNCIA: aquest producte conté productes químics coneguts per l’Estat de Califòrnia que provoquen càncer i defectes congènits o altres danys reproductius.
- Do not expose the unit to extreme temperatures or direct flame.
- Assegureu-vos que hi hagi una ventilació adequada durant la càrrega.
- No intenteu desmuntar ni modificar la unitat.
- Mantenir fora de l'abast dels nens.
Contingut del paquet
- Browning Solar Battery Pack (BTC SBP12)
- 6 Rechargeable Batteries (pre-installed or separate)
- Corretja de muntatge
- Power Cable for connecting to trail camera
Producte acabatview
Configuració
- Instal·leu les bateries: Open the battery compartment on the back of the solar panel unit (refer to Figure 2). Insert the six included rechargeable batteries, ensuring correct polarity. Close the compartment securely.
- Lloc de muntatge: Select a location that receives maximum direct sunlight throughout the day. Avoid areas with heavy shade from trees or buildings.
- Attach to Tree/Post: Use the provided mounting strap to securely attach the solar battery pack to a tree or post (refer to Figure 5). Ensure the unit is stable and will not shift in wind or adverse weather.
- Ajusteu l'angle del panell solar: Utilize the adjustable mounting bracket to angle the solar panel directly towards the sun for optimal charging efficiency. The panel should be angled to capture the most sunlight during peak hours.
- Connecta't a la càmera de rastreig: Connect the power cable from the solar battery pack to the external power input port on your Browning Trail Camera (refer to Figure 6). Ensure the connection is firm and secure.
Note: The solar battery pack is designed to provide supplemental power to your trail camera. It charges its own internal rechargeable batteries, which then power the camera. It does NOT directly recharge the batteries inside your trail camera. It is recommended to have batteries installed in your trail camera as a backup power source.
Instruccions de funcionament
- Encès: Locate the ON/OFF switch on the side control panel (refer to Figure 4). Slide the switch to the 'ON' position.
- Estat de la bateria: The LED indicator lights on the control panel (Figure 4) will show the current charge level of the internal rechargeable batteries. Monitor these lights to ensure adequate power.
- Càrrega solar: Once powered on and exposed to sunlight, the solar panel will automatically begin charging its internal batteries. Ensure the panel is clean and unobstructed for optimal performance.
- Funcionament de la càmera: With the solar battery pack connected and powered on, your trail camera will draw power from the solar unit, preserving its internal batteries.
Manteniment
- Neteja: Netegeu periòdicament la superfície del panell solar amb un drap suau i sec.amp cloth to remove dirt, dust, or debris that may hinder charging efficiency. Do not use abrasive cleaners.
- Comprovació de la bateria: While the internal batteries are rechargeable, their capacity may diminish over time. If you notice reduced performance, consider replacing the six internal rechargeable batteries.
- Inspecció del cable: Regularly inspect the power cable and connectors for any signs of wear, damage, or corrosion. Replace if necessary to ensure a reliable connection.
- Seguretat de muntatge: Check the mounting strap and bracket periodically to ensure the unit remains securely attached and properly angled.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Solar panel not charging internal batteries. | Insufficient sunlight; dirty solar panel; faulty internal batteries. | Relocate unit to a sunnier spot; clean solar panel surface; check/replace internal rechargeable batteries. |
| Trail camera not receiving power from solar unit. | Solar unit is off; power cable is loose/damaged; internal batteries are depleted; solar unit is faulty. | Ensure solar unit is ON; check cable connection; allow solar unit to charge in sunlight; test with fully charged internal batteries. |
| One or more included rechargeable batteries are dead. | Manufacturing defect or prolonged storage. | Replace the faulty battery/batteries with new rechargeable ones of the same type and capacity. |
| Confusion regarding camera battery charging. | Misunderstanding of product function. | The solar panel charges its propi internal batteries, which then power the camera. It does no recharge batteries placed inside the trail camera itself. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | Browning |
| Nom del model | BTC SBP12 |
| Descripció | Paquet de bateries solars de 12 volts |
| Material | Altres |
| Pes de l'article | 2.04 lliures (0.93 quilograms) |
| Eficiència | Alta eficiència |
| Tipus de connector | MC4 |
| Volum màximtage | 12 Volts |
| Components inclosos | Trail Cam Solar Battery (with 6 rechargeable batteries) |
| Dimensions de l'article (LxWxH) | 3.5 x 9.5 x 11 polzades |
| Color | Camo |
| UPC | 855121008424 |
Garantia i Suport
For warranty information and technical support, please contact the manufacturer directly. The warranty description states: "Contact manufacturer".
It is recommended to visit the official Browning website or refer to the contact information provided with your purchase for the most up-to-date support details.
