1. Informació de seguretat
Always prioritize safety when operating power tools. Read and understand all instructions before use. Failure to follow these instructions may result in serious injury or death.
1.1 Advertències generals de seguretat
- Keep work area clear of bystanders, children, and pets.
- Do not operate the pole saw in wet conditions or in the rain.
- Avoid operating near power lines or electrical cables.
- Mantingueu sempre un bon equilibri i una postura correcta. No us excediu.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment, neteja o quan l'eina no estigui en ús.
1.2 Equips de protecció individual (EPI)
Always wear appropriate PPE when operating the pole saw:
- Eye protection (safety glasses or face shield).
- Hearing protection (earmuffs or earplugs).
- Head protection (safety helmet).
- Heavy-duty gloves.
- Long pants and sturdy, non-slip footwear.
1.3 Avís de la Proposició 65
Aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.
2. Producte acabatview
The Oregon PS750 Corded Pole Saw is designed for efficient and safe trimming of high branches. Its lightweight and ergonomic design, combined with powerful cutting capabilities, make it an ideal tool for various gardening and yard maintenance tasks.
2.1 Característiques clau
- Potent 6.5-Amp Motor: Delivers consistent torque for effective cutting.
- Extended Reach: Telescopic handle extends up to 8.8 feet, providing a total reach of up to 14 feet from ground level.
- 8-Inch Guide Bar: Equipped with an 8-inch low kickback chain for smooth and precise cuts on branches up to 8 inches thick.
- Tool-Free Chain Tensioning: Easily adjust chain tension with a convenient knob, ensuring optimal cutting performance.
- Automatic Oiler: Provides continuous lubrication to the chain and bar, reducing friction and extending tool life with minimal maintenance.
- Lightweight Design: Weighs only 7.8 pounds, making it comfortable to use for extended periods.
- Instant Start: Corded electric design ensures immediate power without the need for pull cords or priming.
- Low Noise & Vibration: Operates quietly between cuts and offers reduced vibration for user comfort.
- No Assembly Required: Ready to use right out of the box.
2.2 Components del producte
Familiarize yourself with the main components of your Oregon PS750 Pole Saw:
3. Configuració
The Oregon PS750 Pole Saw comes pre-assembled and ready for immediate use. Follow these steps for initial setup:
- Omplir el dipòsit d'oli: Locate the oil reservoir cap (typically near the guide bar). Fill the reservoir with high-quality bar and chain oil. The automatic oiler requires a full reservoir for proper lubrication during operation.
Figure 3.1: The pole saw extended, showing the general area of the oil reservoir and chain. - Comprovar la tensió de la cadena: Before each use, ensure the chain is properly tensioned. The chain should be snug against the guide bar but still able to be pulled freely by hand. Use the tool-less tensioning knob to adjust if necessary.
Figure 3.2: The tool-less tensioning knob allows for quick and easy chain adjustments. - Fixar la corretja de l'espatlla: For enhanced comfort and control, attach the included shoulder strap to the designated attachment points on the pole saw. Adjust the strap length to distribute the tool's weight comfortably.
- Connecteu-vos a l'alimentació: Plug the pole saw into a suitable 110V power outlet using an appropriate outdoor-rated extension cord. Ensure the extension cord is in good condition and rated for the tool's ampera (6.5 Amps).
4. Instruccions de funcionament
Follow these guidelines for safe and effective operation of your Oregon PS750 Pole Saw.
4.1 Extending the Pole
The telescopic pole allows for adjustable reach. To extend, loosen the locking collar, pull the pole to the desired length (up to 8.8 feet), and securely tighten the locking collar. Ensure the pole is fully locked before operation.
4.2 Inici i aturada
- Començar: Ensure the tool is plugged in. Press the safety lock-out button (if present) and then squeeze the trigger. The saw will start instantly.
- Parar: Release the trigger. The chain will stop quickly.
4.3 Tècniques de tall
Always plan your cuts to ensure the branch falls safely and away from you. Avoid cutting branches that are under tension.
- Limbing: When cutting a limb, make an undercut first (about 1/3 of the way through) to prevent bark stripping. Then, make the top cut slightly further out from the trunk.
- Poda: For smaller branches, a single cut from the top may suffice. Always ensure the saw is at full speed before engaging the wood.
- Branch Thickness: The PS750 is designed to cut branches up to 8 inches thick. Do not attempt to cut larger branches.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la serra de perxa.
5.1 Tensió de la cadena
Check chain tension frequently, especially during initial use and after extended periods of operation. A properly tensioned chain will not sag on the underside of the guide bar but can still be pulled around the bar by hand. Adjust using the red tool-less tensioning knob.
5.2 Automatic Oiler and Oil Level
The PS750 features an automatic oiler. Regularly check the oil level in the reservoir and refill with quality bar and chain oil as needed. Do not operate the saw without sufficient oil, as this can cause severe damage to the chain and bar.
5.3 Esmolat i substitució de la cadena
A sharp chain is crucial for safe and efficient cutting. If the saw is cutting slowly, producing fine sawdust instead of chips, or pulling to one side, the chain likely needs sharpening. Refer to an authorized Oregon service center or a qualified technician for chain sharpening or replacement. Always use genuine Oregon replacement chains.
5.4 Neteja i emmagatzematge
- After each use, disconnect the power and clean the saw head, guide bar, and chain of any sawdust, sap, or debris.
- Guardeu la serra de perxa en un lloc sec i segur, fora de l'abast dels nens.
- Ensure the chain guard is in place during storage and transport.
6. Solució De Problemes
This section addresses common issues you might encounter with your Oregon PS750 Pole Saw.
| Problema | Causa possible | Solució |
|---|---|---|
| La serra no arrenca. | No power, faulty extension cord, trigger not fully depressed. | Check power connection and outlet. Inspect extension cord for damage. Ensure safety lock-out and trigger are fully engaged. |
| La cadena no es mou o es mou lentament. | Chain too tight, chain dull, insufficient oil, debris in chain/bar. | Adjust chain tension (Section 5.1). Sharpen or replace chain (Section 5.3). Refill oil reservoir (Section 5.2). Clean guide bar groove and chain. |
| Saw cuts poorly or unevenly. | Cadena desafilada, tensió incorrecta de la cadena, barra guia desgastada. | Sharpen or replace chain (Section 5.3). Adjust chain tension (Section 5.1). Inspect guide bar for wear and replace if necessary. |
| Oil leaks from saw. | Overfilled reservoir, loose cap, normal seepage. | Do not overfill. Ensure cap is tight. Some seepage is normal; store on a non-absorbent surface. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Oregon customer support or an authorized service center.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Oregon |
| Número de model | PS750 (621362) |
| Font d'alimentació | Elèctric amb cable |
| Motor Ampedat | 6.5 Amps |
| Voltage | 110 Volts |
| Wattage | 715 watts |
| Longitud de la barra guia | 8 polzades |
| Màx. Diàmetre de tall | 8 polzades |
| Abast estès | Up to 14 feet (from ground level, with user) |
| Dimensions del producte (L x A x A) | 68.1" x 6.1" x 4.7" (unextended) |
| Pes de l'article | 7.8 lliures |
| Components inclosos | Corretja d'espatlla |
| Color | Negre |
| Material del mànec | Plastic or Composite |
8. Garantia i Suport
8.1 Garantia limitada
The Oregon PS750 Corded Pole Saw is covered by a 2-year manufacturer limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For full warranty details and terms, please refer to the documentation included with your product or visit the official Oregon weblloc.
8.2 Atenció al client
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Oregon customer support. Contact information can typically be found on the product packaging or the official Oregon weblloc.
When contacting support, please have your product model number (PS750 or 621362) and serial number (if applicable) ready.
