Introducció
The Sinocare Blood Pressure Monitor (Model AES-U181) is designed for accurate and convenient measurement of blood pressure and pulse rate at home. Featuring a large LED screen, adjustable upper arm cuff, and voice broadcast function, it provides a user-friendly experience for monitoring your health.
Contingut del paquet
Upon opening your Sinocare Blood Pressure Monitor package, you will find the following items:
- 1 x Sinocare Upper Arm Blood Pressure Monitor
- 1 x Adjustable Upper Arm Cuff (8.6-16.5 inches / 24-42cm)
- 1 x Manual d'usuari
- 4 x piles AAA
The main unit of the Sinocare Blood Pressure Monitor along with its adjustable upper arm cuff.
Un complet view of the package contents, including the blood pressure monitor, cuff, user manual, and four AAA batteries.
Configuració
1. Instal·lació de la bateria
The Sinocare Blood Pressure Monitor operates on 4 AAA batteries, which are included in the package.
- Locate the battery compartment on the bottom of the main unit.
- Feu lliscar la tapa de la bateria.
- Insert the 4 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Tanqueu la tapa de la bateria amb seguretat.
Un primer pla view of the battery compartment on the underside of the monitor, showing the correct placement of the four AAA batteries.
This video demonstrates how to open the battery compartment and correctly insert the four AAA batteries into the Sinocare Blood Pressure Monitor.
2. Connexió del maneguet
Connect the air tube from the cuff to the air jack on the side of the main unit. Ensure it is securely inserted.
The adjustable arm cuff's air tube is shown securely connected to the designated port on the side of the blood pressure monitor.
This video clip illustrates the process of connecting the air tube from the arm cuff to the main blood pressure monitor unit.
Instruccions de funcionament
1. Preparació per a la mesura
For accurate readings, follow these steps before taking a measurement:
- Seieu en una posició còmoda amb l'esquena recolzada i els peus a terra.
- Place your forearm on a table, palm facing up.
- Ensure the cuff is wrapped correctly around your upper arm, with enough space to slide two fingertips underneath. The air tube should be located on the forearm.
- Position the cuff so that the central area of the arm cuff is at the same height as your heart.
- Romangui quiet i eviti parlar durant el procés de mesurament.
- Allow at least 1 minute between consecutive measurements to allow blood flow to normalize.
A visual guide detailing the correct posture, cuff placement, and preparation steps for obtaining accurate blood pressure readings.
This official video provides a comprehensive guide on the correct procedure for measuring blood pressure using the Sinocare monitor, emphasizing proper body and arm positioning.
2. Prendre una mesura
Once prepared, simply press the "START/STOP" button to begin the measurement. The monitor will automatically inflate the cuff and display your systolic pressure, diastolic pressure, and pulse rate.
The large LED screen of the Sinocare Blood Pressure Monitor clearly shows systolic (SYS), diastolic (DIA), and pulse (PUL) readings after a measurement.
This video demonstrates the one-touch operation of the Sinocare Blood Pressure Monitor, from pressing the start button to the display of the final blood pressure and pulse readings.
3. Funció de veu
The monitor features a voice broadcast function that announces your blood pressure and pulse readings. This function can be turned on or off according to your preference. Refer to the user manual for specific instructions on adjusting voice settings.
The monitor's display highlights the voice announcement feature, which provides audible readings for enhanced accessibility.
This segment of the video demonstrates the voice broadcast feature, where the monitor audibly announces the blood pressure and pulse results.
4. Funció de memòria
The Sinocare Blood Pressure Monitor supports two user modes and can store up to 180 data sets (90 readings for each user). This allows for tracking individual progress over time.
The monitor supports two distinct user profiles, allowing each user to store and track their individual blood pressure readings.
Important Notes for Accurate Readings
- Blood pressure can vary throughout the day. For consistent monitoring, take measurements at the same time each day.
- Ensure the cuff is tied correctly and not too tight, allowing two fingertips to slide underneath.
- The measurement position significantly impacts results. Always measure under the same conditions (e.g., sitting, arm at heart level).
- Eviteu parlar o moureu-vos durant la mesura.
- If you need to take multiple readings, wait at least one minute between measurements to allow blood flow to normalize.
Especificacions del producte
| Característica | Especificació |
|---|---|
| Nom del model | AES-U181 |
| Marca | Sinocare |
| Tipus de visualització | Digital |
| Mida del puny | 8.6-16.5 polzades (24-42 cm) |
| Measurement Accuracy (Pressure) | ± 3 mmHg |
| Measurement Accuracy (Pulse) | ± 5% |
| Emmagatzematge de memòria | 180 sets (90 for each of 2 users) |
| Font d'alimentació | 4 piles AAA (incloses) |
| Apagat automàtic | Després d'1 minut d'inactivitat |
Manteniment
- Neteja: Netegeu el monitor i el braçalet amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Substitució de la bateria: Canvieu les piles quan aparegui l'indicador de bateria baixa a la pantalla per garantir lectures precises.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No display/Unit does not turn on | Les piles estan gastades o incorrectament inserides. | Comproveu la polaritat de la bateria o substituïu-la per piles AAA noves. |
| Lectures inexactes | Incorrect cuff placement, movement/talking during measurement, or insufficient rest before measurement. | Re-read "Preparation for Measurement" and "Important Notes for Accurate Readings" sections. Ensure proper technique. |
| El maneguet no s'infla | Air tube not securely connected or cuff is damaged. | Check cuff connection. If still not inflating, contact customer service. |
Garantia i Suport
Sinocare is committed to providing high-quality products and excellent customer service. If you have any questions, concerns, or require assistance with your Blood Pressure Monitor, please do not hesitate to contact our customer service team. We aim to reply within 24 hours and offer proper solutions.
Please refer to your product packaging or the official Sinocare weblloc web per obtenir detalls específics de la garantia i informació de contacte.
