Tiiwee X1 Home Alarm System

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Tiiwee X1 Home Alarm System. The system is designed to provide reliable security for your home, apartment, garage, or caravan by detecting unauthorized entry through doors and windows. It features a loud siren and is easily expandable with additional Tiiwee accessories.

Components del producte acabatsview

The Tiiwee X1 Home Alarm System kit typically includes the following components:

• 1 x Tiiwee X1 Siren Unit
• 4 sensors de porta/finestra
• 2 x comandaments a distància
• Mounting hardware (double-sided adhesive tape, screws)
• Batteries (AA for siren, AAA for sensors)

The X1 Siren Unit features a 120dB siren, a 4-zone light indicator, manual settings, lock/unlock buttons, and a low battery indicator.

Image: Tiiwee X1 Siren Unit with key features labeled.

Instruccions de configuració

1. Instal·lació de la bateria

• X1 Siren Unit: Open the battery compartment on the back of the X1 siren. Insert 3 AA batteries, ensuring correct polarity. Close the compartment. The siren is designed for long battery life, up to 12 months.
• Sensors de porta/finestra: Each sensor requires 1 AAA battery. Open the sensor casing and insert the battery, observing polarity. Close the casing.
• Comandaments a distància: Remote controls come with pre-installed batteries.

2. Muntatge de sensors

Door and window sensors consist of two parts: a main sensor unit and a magnetic contact. They should be mounted on a door/window frame and the moving part (door/window) respectively, ensuring they are aligned and close to each other (within 1 cm) when the door/window is closed.

• Muntatge adhesiu: Clean the surface thoroughly. Apply the included double-sided adhesive tape to the back of both sensor parts. Press firmly onto the desired location.
• Muntatge de cargols: For a more permanent installation, use the provided screws to attach the sensor parts to the door/window frame.

3. Mounting the X1 Siren Unit

The X1 siren can be mounted using screws or used as a portable device.

• Muntatge de cargols: Use the provided screws to attach the siren to a wall or other suitable surface.
• Ús portàtil: The siren can be placed on a flat surface for flexible placement.

4. Zone Configuration (Optional)

The X1 system supports up to 4 zones, with 10 sensors per zone (total 40 sensors). Sensors are typically pre-paired to a default zone. Refer to the detailed pairing instructions for specific zone assignment if you are adding new sensors or customizing your setup.

Image: Illustration of Tiiwee X1 system installation and expandability within a home environment.

Instruccions de funcionament

Arming and Disarming the System

Use the remote control to arm and disarm the system. The wireless signal can pass through walls and doors, allowing control from outside your property.

• Braç: Premeu el botó Bloqueig button on the remote control to arm the system. The X1 siren will emit a confirmation sound.
• Desarma: Premeu el botó Desbloqueja button on the remote control to disarm the system. The X1 siren will emit a confirmation sound.
• Botó de pànic: Some remote controls may feature a panic button (often indicated by a lightning bolt or bell icon) which, when pressed, will immediately trigger the siren.

Siren Sound Selection and Volume

The X1 siren offers flexibility in its sound output:

• Mode de sirena: The default alarm sound is a loud 120 dB siren.
• Mode de timbre: The siren can also be set to a doorbell chime sound. This mode has 2 different volume levels, allowing you to adjust the X1 to your preferred volume. Refer to the detailed manual for instructions on switching between siren and chime modes and adjusting chime volume.

Indicador de zona

The X1 siren features a zone indicator light on its front panel. This indicator shows which zone triggered the alarm, helping you identify the point of entry.

Indicació de bateria baixa

The X1 siren has a light indicator to check the system's status. A specific audible signal will alert you when the batteries are low, prompting replacement.

Expandabilitat

The Tiiwee X1 system is designed to be expandable. You can add various compatible Tiiwee accessories to enhance your security setup.

• Sensors addicionals: Integrate more door/window sensors for comprehensive coverage.
• Motion Detectors: Add Tiiwee indoor and outdoor PIR motion detectors.
• Additional Sirens: Connect more Tiiwee X1 sirens or an A3 outdoor siren for increased deterrence.
• Botons d'emergència: Integrate Tiiwee emergency buttons for immediate alarm activation.
• Extra Remote Controls: Add more remote controls for multiple users or access points.

Up to 40 sensors can be connected across 4 zones (10 sensors per zone). Refer to the accessory's specific manual for pairing instructions.

Image: Tiiwee X1 Alarm System compatibility with various accessories.

Manteniment

Canvi de bateria

When the low battery indicator on the X1 siren activates, or if a sensor/remote control stops responding, replace the batteries promptly.

• Sirena X1: Substituïu-les per 3 piles alcalines AA noves.
• Sensors de porta/finestra: Replace with 1 new AAA alkaline battery per sensor.
• Comandaments a distància: Replace with the appropriate coin cell battery (refer to the remote control's specific instructions).

Ensure correct battery polarity during replacement. Dispose of old batteries responsibly.

Neteja

Netegeu les unitats amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.

Resolució de problemes

• El sistema no s'arma/desarma:
  • Check batteries in the remote control and X1 siren.
  • Ensure you are within the wireless range (typically 2-3 floors, depending on building materials).
• Sensor not triggering alarm:
  • Verify sensor battery.
  • Check alignment of the two sensor parts; they must be within 1 cm when closed.
  • Ensure the sensor is properly paired with the X1 siren.
• Siren not sounding or too quiet:
  • Check X1 siren batteries.
  • Ensure the siren is not set to chime mode if you expect a loud alarm. Adjust chime volume if in chime mode.
• Falses alarmes:
  • Ensure sensors are securely mounted and not easily dislodged.
  • If using motion detectors (optional accessory), ensure they are placed away from heat sources or drafts that could cause false triggers.

Especificacions

Image: Tiiwee Siren Model Comparison.

Garantia i Suport

Tiiwee is committed to product quality and customer satisfaction. While specific warranty details are not provided in this manual, Tiiwee aims to provide prompt and friendly service for any product issues.

For technical assistance, troubleshooting beyond this manual, or inquiries regarding compatible accessories, please refer to the official Tiiwee weblloc web o contacteu directament amb el seu servei d'atenció al client.