Einhell TE-OS 18/150 Li-Solo Power X-Change Cordless Multi-Sander Instruction Manual

1. Introducció

This instruction manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Einhell TE-OS 18/150 Li-Solo Power X-Change Cordless Multi-Sander. Please read this manual thoroughly before using the tool and keep it for future reference. This product is part of the Einhell Power X-Change family, meaning it operates with any 18V Power X-Change battery.

Figure 1: Einhell TE-OS 18/150 Li-Solo Cordless Multi-Sander with included abrasive sheets.

2. Instruccions generals de seguretat

Always observe the following safety precautions when operating power tools to prevent electric shock, fire, and serious injury.

• Seguretat de l'àrea de treball: Mantingueu la vostra zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden als accidents. No feu servir eines elèctriques en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• Seguretat elèctrica: Eviteu el contacte corporal amb superfícies connectades a terra. No exposeu les eines elèctriques a la pluja ni a condicions humides.
• Seguretat personal: Always wear eye protection. Use hearing protection when operating for extended periods. Wear a dust mask in dusty conditions. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Ús i cura de l'eina: Do not force the power tool. Use the correct power tool for your application. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Ús i cura de l'eina de la bateria: Recarrega només amb el carregador especificat pel fabricant. Utilitza eines elèctriques només amb bateries específicament designades.

3. Components del producte

The Einhell TE-OS 18/150 Li-Solo multi-sander includes the following components:

• Cordless Multi-Sander Unit
• Dust Collection Box (with filter)
• Adapter for External Dust Extraction
• 6 Abrasive Sheets (3x P120, 3x P240)

Nota: This product is supplied without a battery or charger. These are sold separately as part of the Power X-Change system.

Figure 2: Key features of the multi-sander, including Softgrip, dust extraction, delta sanding shoe, and large oscillating motion.

Figure 3: The Einhell TE-OS 18/150 Li-Solo is sold without a battery or charger.

4. Configuració

4.1 Instal·lació de la bateria

1. Ensure the sander's power switch is in the 'OFF' position.
2. Slide a charged 18V Power X-Change battery pack into the battery receptacle on the rear of the sander until it clicks securely into place.
3. Per treure la bateria, premeu el botó d'alliberament del paquet de bateries i feu-la lliscar cap a fora.

4.2 Attaching Abrasive Paper

The sander features an 'Extreme Fix' hook-and-loop fastening system for quick and secure abrasive paper changes.

1. Ensure the sander is switched off and the battery is removed.
2. Align the holes on the abrasive sheet with the holes on the sanding plate.
3. Press the abrasive sheet firmly onto the hook-and-loop surface of the sanding plate to secure it.
4. To remove, simply peel the abrasive sheet off the sanding plate.

Figure 4: Attaching abrasive paper using the hook-and-loop system.

Figure 5: The sander comes with 6 abrasive sheets (3x P120, 3x P240).

4.3 Extracció de pols

The sander offers two options for dust extraction:

• Integrated Dust Collection Box: Attach the provided dust collection box to the designated port on the sander. This is suitable for most light to medium sanding tasks.
• External Dust Extraction: For prolonged use or when working with fine dust, attach the vacuum adapter to the dust extraction port and connect it to a suitable workshop vacuum cleaner.

Figure 6: Options for dust extraction: integrated dust collector or external vacuum connection.

5. Instruccions de funcionament

5.1 Engegada/apagada

1. Ensure a charged battery is installed and abrasive paper is securely attached.
2. To start the sander, push the ON/OFF switch to the 'I' (ON) position.
3. To stop the sander, push the ON/OFF switch to the 'O' (OFF) position.

5.2 Tècniques de poliment

• Hold the sander firmly with one hand using the Softgrip surface.
• Place the sanding plate flat on the workpiece before switching the tool on.
• Apply light, even pressure. Do not press too hard, as this can reduce sanding efficiency and damage the workpiece or tool.
• Mou la polidora amb moviments suaus i superposats per la superfície.
• The delta-shaped sanding plate is ideal for sanding corners, edges, and smaller, intricate areas.
• Always switch off the sander and allow it to come to a complete stop before lifting it from the workpiece.

Figure 7: Demonstrating the use of the multi-sander for detailed work on a window frame.

Figure 8: The compact design allows for optimal handling and one-handed control.

5.3 Battery Runtime (No Load)

The approximate maximum running time per battery charge (no load) for various Power X-Change battery capacities is as follows:

• 2.0 AH: 27 minutes
• 2.5 AH: 34 minutes
• 3.0 AH: 40 minutes
• 4.0 AH: 55 minutes
• 5.2 AH: 70 minutes
• 8.0 AH: 110 minutes

Figure 9: Battery runtime chart for various Power X-Change battery capacities.

6. Manteniment

6.1 Cleaning the Dust Collection Box

1. Regularly empty the dust collection box to maintain optimal dust extraction performance.
2. Traieu la caixa de pols de la polidora.
3. Open the dust box and dispose of the collected dust.
4. Clean the filter inside the dust box by tapping it or using compressed air.
5. Torneu a fixar la caixa de pols de manera segura a la polidora.

6.2 Neteja i inspecció general

• Always remove the battery before any cleaning or maintenance.
• Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air.
• Netegeu la carcassa de l'eina amb un drap suau iamp tela. No utilitzeu agents de neteja o dissolvents forts.
• Regularly inspect the sanding plate for wear or damage. Replace if necessary.
• Check the power switch for proper function.

7. Solució De Problemes

If you encounter issues with your multi-sander, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact Einhell customer support.

8. Especificacions

9. Garantia i Suport

For warranty information, product registration, or technical support, please refer to the official Einhell website or contact your local Einhell service center. Keep your proof of purchase for any warranty claims.

No s'han trobat vídeos oficials de productes del venedor per incrustar en aquest manual.