Introducció
Thank you for choosing the Parkside PDR 12 A1 Mobile Pressure Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference. This mobile pressure washer is designed for removing dirt, loam, and sand from various surfaces such as rims, shoes, and garden tools.
Instruccions de seguretat
Sempre observeu les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.
- Llegeix totes les instruccions: Familiaritzeu-vos amb els controls i l'ús correcte de la rentadora a pressió.
- Porteu equip de seguretat adequat: Always wear eye protection and suitable clothing to protect against spray and debris.
- Mantingueu allunyats els nens i les mascotes: Do not allow children or untrained persons to operate the pressure washer.
- Avoid direct spray on people or animals: The high-pressure jet can cause serious injury.
- Comproveu si hi ha danys: Before each use, inspect the device, hose, and connections for any damage. Do not use if damaged.
- Use only clean water: Do not use corrosive liquids or chemicals that could damage the device or pose a health risk.
- Connexions segures: Ensure all hose and gun connections are securely fastened before operation.
- Protect from water ingress: Although splash-proof (IP44), avoid submerging the unit or exposing it to heavy rain.
- Seguretat de la bateria: Feu servir només el carregador especificat per a la bateria de ions de liti integrada. No exposeu la bateria a temperatures extremes ni a la llum solar directa.
Producte acabatview i Components
The Parkside PDR 12 A1 Mobile Pressure Washer consists of several key components designed for portability and ease of use.


Els components clau inclouen:
- Unitat principal: Houses the pump, battery, and control electronics.
- Dipòsit d'aigua extraïble: 5-liter capacity with a carrying handle.
- Pistola de polvorització: Handheld with a flat jet nozzle for effective cleaning.
- Mànega espiral: Approximately 2.8 meters long, connects the unit to the spray gun.
- 12-Volt Car Connection Cable: Per a font d'alimentació externa.
- LED Charging Status Indicator: Mostra el nivell de càrrega de la bateria.
- Compartiment d'emmagatzematge: Integrated into the housing for the hose and spray gun.
Configuració
- Carregueu la bateria:
- Before first use, fully charge the integrated lithium-ion battery using the supplied 60-minute fast charger.
- Connect the charger to a suitable power outlet and to the charging port on the pressure washer.
- The LED charging status indicator will show the charging progress. The charger features automatic charge cut-off to prevent overcharging.
- Ompliu el dipòsit d’aigua:
- Remove the 5-liter water tank from the main unit by lifting it using its carrying handle.
- Fill the tank with clean water. Do not exceed the maximum fill line.
- Place the filled water tank back into the main unit, ensuring it is securely seated.
- Connect the Hose and Spray Gun:
- Uncoil the spiral hose from its storage compartment.
- Connect one end of the spiral hose to the outlet on the main unit and the other end to the spray gun. Ensure all connections are tight to prevent leaks.
- Optional: Connect to 12-Volt Car Adapter:
- If using the 12-volt car connection mode, plug the supplied cable into the designated port on the pressure washer and into your vehicle's 12V socket.
- Ensure the vehicle's engine is running to provide stable power and prevent draining the car battery.
Instruccions de funcionament
- Encès:
- Press the power button on the main unit to turn on the pressure washer. The LED indicator will illuminate.
- If operating via the 12-volt car adapter, ensure the car engine is running.
- Cebada de la bomba:
- Before spraying, point the spray gun in a safe direction and press the trigger until a steady stream of water emerges. This removes any air from the system.
- Using the Spray Gun:
- Hold the spray gun firmly. The flat jet nozzle provides a wide spray pattern suitable for general cleaning.
- Maintain a safe distance from the surface being cleaned to avoid damage. Start further away and move closer if more pressure is needed.
- Always spray away from electrical components or sensitive areas.
- Procediment de neteja:
- Apply water to the surface to loosen dirt.
- Work from top to bottom on vertical surfaces to allow dirt to run off.
- For stubborn dirt, allow the water to soak for a few moments before rinsing.
- Apagar:
- After use, release the spray gun trigger.
- Press the power button on the main unit to turn off the pressure washer.
- If using the 12-volt car adapter, disconnect it from the vehicle's socket.
- Depressurizing the System:
- Point the spray gun in a safe direction and press the trigger to release any remaining pressure in the hose and gun.
Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de la teva rentadora a pressió.
- Neteja la unitat: Després de cada ús, netegeu l'exterior de la rentadora a pressió amb un anunci.amp tela. No utilitzeu netejadors abrasius.
- Drain and Store Water Tank: Empty any remaining water from the tank. Clean the tank if necessary and allow it to air dry before storage to prevent mold or odor.
- Hose and Spray Gun Storage: Coil the spiral hose neatly and store it, along with the spray gun, in the designated compartment on the unit.
- Cura de la bateria: For long-term storage, ensure the battery is partially charged (around 50-70%). Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery every few months if not in use to maintain its health.
- Comproveu les connexions: Periodically inspect all hose and gun connections for wear or damage. Replace any worn parts immediately.
Resolució de problemes
Si teniu problemes amb la vostra rentadora a pressió, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén. | Battery is discharged or not properly connected. 12V adapter not connected or car engine off. | Charge the battery. Ensure 12V adapter is securely connected and car engine is running. |
| Sense pressió d'aigua o amb poca pressió. | Water tank empty. Air in the system. Clogged nozzle. | Refill water tank. Prime the pump by pressing the trigger until steady water flow. Clean the nozzle. |
| Fuites d'aigua per les connexions. | Connexions fluixes. Juntes tòriques o segells danyats. | Tighten all hose and gun connections. Inspect and replace any damaged O-rings or seals. |
| La unitat s'atura durant el funcionament. | Battery discharged. Overheating. | Recharge the battery. Allow the unit to cool down before resuming operation. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
Especificacions
| Model | PDR 12 A1 |
| Pressió de treball | Approx. 0.5 Mpa (5 bar) |
| Tipus de bateria | Lithium-ion 12 Volt max (approx. 2.0 Ah) |
| Carregador | 60-minute fast charger with automatic charge cut-off |
| Caudal màxim | Approx. 2 liters/minute |
| Material de l'habitatge | Polipropilè |
| Material del dipòsit | Polipropilè |
| Dimensions (aprox.) | Ø 29.5 x H 21 cm |
| Spiral Hose Length (max.) | 2.8 metres |
| Capacitat del dipòsit d'aigua | Aprox. 5 litres |
| Classe de protecció | IP44 (a prova d'esquitxades) |
Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or visit the official Parkside website. If you require technical support or have questions not covered in this manual, please contact Parkside customer service.





