Producte acabatview
This Lexon Heavy Duty 1 oz Dispenser Pump is designed for efficient and mess-free dispensing from most 5-gallon containers. It ensures the distribution of the correct amount of product with each use.

Image: The Lexon Heavy Duty 1 oz Dispenser Pump, showing its white pump head, main body, and the long dip tube.
Instruccions de configuració
Follow these steps to properly set up your dispenser pump:
- Verify Container Compatibility: Ensure your 5-gallon bucket has a 1-1/2-inch (38 mm) spout. This pump is specifically designed for this size.
- Prepare the Dip Tube: The pump comes with a long 11-inch trimmable dip tube. Measure the depth of your 5-gallon container. If the dip tube is too long, carefully trim it to the appropriate length to ensure it reaches near the bottom of the container without bending or kinking. Use sharp scissors or a utility knife for a clean cut.
- Insert the Pump: Screw the pump head securely onto the spout of your 5-gallon container. Ensure a tight seal to prevent leaks and maintain proper siphoning.
- Encebar la bomba: Before first use, press the pump head several times until the product begins to dispense consistently. This removes any air from the pump mechanism.
Instruccions de funcionament
The Lexon dispenser pump is designed for easy and precise dispensing:
- Dispensació: Press the pump head down completely for a full stroke. Each full stroke dispenses approximately 1 fluid ounce (30 ccs) of product.
- Aplicacions: This pump is suitable for a wide range of liquid products, including massage lotions, gels, oils, laundry detergent, dishwashing soap, shampoo, conditioner, and similar viscous liquids.
- Consistent Dosing: For consistent dosing, ensure the pump is fully depressed and allowed to return to its original position after each dispense.
Manteniment
Proper maintenance ensures the longevity and optimal performance of your pump:
- Neteja del broquet: Over time, dried product may accumulate in the nozzle, potentially causing blockages. Regularly clean the nozzle by wiping it with a damp cloth. For stubborn blockages, use a small poker or thin wire to clear the opening.
- Neteja general: If changing products or for general hygiene, the pump can be cleaned by pumping warm water through it until clear. Avoid using harsh chemicals that may damage the pump materials.
- Emmagatzematge: When not in use for extended periods, ensure the pump is clean and stored in a dry place.
Resolució de problemes
If you encounter issues with your dispenser pump, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Pump not dispensing or dispensing inconsistently |
|
|
| Product leaking from the pump base |
|
|
Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 1 cm de llargada x 2 cm d'amplada x 15 cm d'alçada (1 x 2 x 15 cm) |
| Número de model de l'article | LX5 |
| Fabricant | Lexon |
| Dispense Volume | 1 fluid ounce (30 ccs) per full stroke |
| Dip Tube Length | 11 inches (trimmable) |
| Compatible Spout Size | 1-1/2-inch (38 mm) |
| Siphon Stops | 2 (to prevent leaks) |
| UPC | 722537596640 |
Garantia i Suport
Specific warranty information for this product is not provided in the available documentation. For any product support or warranty inquiries, please contact Lexon directly through their official channels or the retailer from whom the product was purchased.
No hi havia vídeos oficials de producte del venedor disponibles per incloure'ls en aquest manual.





