INGCO High-Pressure Washer (Model INGCO-HPWR25008) User Manual

1. Instruccions de seguretat

Read all safety warnings and instructions carefully before operating the appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Seguretat general

• Utilitzeu sempre l'equip de protecció individual adequat, com ara ulleres de seguretat, protecció auditiva i calçat protector.
• Never direct the water jet at people, animals, electrical equipment, or the appliance itself.
• Assegureu-vos que la font d'alimentació voltagcoincideix amb la placa de dades de l'aparell.
• Do not operate the pressure washer if the power cord or other important parts are damaged.
• Mantingueu els nens i les persones no autoritzades allunyats de la zona d'operació.
• Always disconnect the power plug from the outlet before performing any cleaning or maintenance.
• No utilitzeu l'aparell en presència de líquids o gasos inflamables.
• Use only original replacement parts and accessories.

Seguretat elèctrica

• The appliance must be connected to a power supply that includes a residual current device (RCD) with a tripping current of not more than 30 mA.
• Ensure all electrical connections are dry and protected from water spray.
• No abuseu del cordó. No utilitzeu mai el cable per transportar, estirar o desconnectar l'eina elèctrica. Mantingueu el cable allunyat de la calor, l'oli, les vores afilades o les peces mòbils.

2. Producte acabatview

The INGCO High-Pressure Washer (Model INGCO-HPWR25008) is designed for effective cleaning tasks. It features a powerful copper wire induction motor and an Auto Stop System for enhanced efficiency and safety.

Característiques clau

• Voltage: 220-240V~50Hz
• Potència d'entrada: 2500W
• Pressió màxima: 160 bar (2300 PSI)
• Motor: Copper wire induction motor
• Seguretat: Auto Stop System (TSS)
• Caudal: 6.0 L/min
• Longitud de la mànega: 5m steel wired pressure hose

Contingut del paquet

Verifiqueu que tots els elements siguin presents i no estiguin danyats en desempaquetar-los.

• 1 x Pressure Washer Unit
• 1 x Pressure Lance
• 1 x Pressure Gun
• 1 x 5m Steel Wired Pressure Hose
• 1 x connector ràpid
• 1 x Soap Bottle
• 1 x Water Inlet Connector

This image displays the main pressure washer unit, its integrated hose reel, and the various accessories such as the pressure gun, lance, and high-pressure hose. The unit is yellow and black, indicating the brand's typical color scheme.

3. Configuració

Segueix aquests passos per muntar i preparar la teva rentadora a pressió per al primer ús.

3.1 Attaching the Handle and Wheels (if separate)

Some models may require attaching the handle and wheels. Refer to the diagrams in your specific model's packaging for detailed instructions. Ensure all components are securely fastened.

3.2 Connexió de la mànega d'alta pressió

1. Uncoil the 5m steel wired pressure hose.
2. Connect one end of the high-pressure hose to the high-pressure outlet on the pressure washer unit. Tighten securely by hand.
3. Connect the other end of the high-pressure hose to the inlet of the pressure gun. Tighten securely.

Aquesta imatge ofereix un costat view of the INGCO pressure washer, highlighting the hose reel and the general layout of the unit, which helps in identifying connection points for the high-pressure hose.

3.3 Connexió del subministrament d'aigua

1. Attach the water inlet connector to the water inlet on the pressure washer unit.
2. Connect a standard garden hose (not included) to the water inlet connector.
3. Connect the other end of the garden hose to a water tap.
4. Ensure the water tap is fully open before starting the pressure washer. The water supply must be sufficient to meet the flow rate of 6.0 L/min.
5. Important: Do not run the pressure washer without a water supply, as this can damage the pump.

3.4 Attaching the Lance and Nozzle

1. Insert the pressure lance into the pressure gun and twist until it locks into place.
2. Attach the desired nozzle to the end of the lance. Ensure it is securely fitted.

4. Instruccions de funcionament

Follow these steps for safe and effective operation of your INGCO High-Pressure Washer.

4.1 Engegar la rentadora a pressió

1. Ensure all connections (water supply, high-pressure hose, lance) are secure.
2. Obriu completament l'aixeta de l'aigua.
3. Squeeze the trigger on the pressure gun to purge air from the system until a steady stream of water emerges.
4. Connecteu el cable d'alimentació a una presa de corrent adequada.
5. Turn the ON/OFF switch on the pressure washer to the "ON" position. The motor will start.
6. The Auto Stop System (TSS) will automatically shut off the motor when the trigger is released and restart it when the trigger is pressed again.

4.2 Using the Soap Bottle (Detergent Application)

1. Fill the soap bottle with appropriate pressure washer detergent.
2. Attach the soap bottle to the pressure gun or designated detergent inlet (refer to your specific model's diagram).
3. Operate the pressure washer at low pressure (if adjustable) or use the detergent nozzle to apply soap.
4. After applying detergent, remove the soap bottle and rinse the system with clean water before continuing with high-pressure rinsing.

4.3 Stopping the Pressure Washer

1. Turn the ON/OFF switch on the pressure washer to the "OFF" position.
2. Desendolleu el cable d'alimentació de la presa de corrent.
3. Tanqueu l'aixeta de l'aigua.
4. Squeeze the trigger on the pressure gun to release any remaining pressure in the system.
5. Disconnect the high-pressure hose and water supply hose.

5. Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la teva rentadora a pressió.

5.1 Neteja del broquet

If the nozzle becomes clogged, use the provided nozzle cleaning tool (if included) or a thin wire to clear any debris. Rinse the nozzle with water.

5.2 Neteja del filtre d'entrada d'aigua

The water inlet filter prevents debris from entering the pump. Regularly check and clean the filter by rinsing it under running water.

5.3 Emmagatzematge

• Before storing, ensure all water is drained from the pump, hoses, and accessories to prevent freezing damage.
• Guardeu la rentadora a pressió en un lloc sec i sense gelades.
• Enrotlleu la mànega d'alta pressió i el cable d'alimentació amb cura.
• Store the pressure gun, lance, and nozzles in their designated holders on the unit (if available) or in a safe place.

Aquesta imatge mostra un pro lateralfile of the INGCO pressure washer, clearly displaying the translucent soap bottle attached to the unit, which is important for maintenance and refilling.

6. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb la vostra rentadora a pressió.

7. Especificacions

Technical data for the INGCO High-Pressure Washer Model INGCO-HPWR25008.

8. Garantia i assistència

INGCO products are manufactured to high-quality standards and are guaranteed against manufacturing defects. Please retain your proof of purchase for warranty claims.

Informació de la garantia

Specific warranty terms and conditions may vary by region. For detailed warranty information, please refer to the warranty card included with your product or visit the official INGCO weblloc.

Atenció al client

For technical assistance, spare parts, or service inquiries, please contact your local INGCO dealer or authorized service center. You can find contact information on the official INGCO weblloc web o a través del vostre distribuïdor.

When contacting support, please have your product model number (INGCO-HPWR25008) and serial number (if applicable) ready.