RC FanJu FJ3530 Digital Alarm Clock User Manual

1. Introducció

This manual provides detailed instructions for the setup, operation, and maintenance of your RC FanJu FJ3530 Digital Alarm Clock. This device features a large display, dual alarms, indoor temperature monitoring, moon phase display, and a multi-language calendar, designed for clear readability and ease of use.

2. Característiques del producte

• Large display for easy readability from any angle.
• Dual alarms with snooze function.
• Indoor temperature display in Celsius (°C) or Fahrenheit (°F).
• 7-language calendar.
• 12/24 hour time format.
• Moon phase display.
• Funció de temporitzador.
• Battery-operated for flexible placement (requires 2 AA batteries, not included).
• DCF automatic time setting (applicable to Germany only; manual setting required for other regions).

3. Producte acabatview

3.1 Pantalla frontal

The large LCD screen displays time, date, day of the week, moon phase, and indoor temperature. Icons indicate active alarms, DCF signal reception, and battery status.

Figura 1: Frontal view of the RC FanJu FJ3530 Digital Alarm Clock.

3.2 Back Panel and Buttons

The back of the clock houses the battery compartment and control buttons for setting various functions.

Figure 2: Back panel with control buttons.

• SET: Enters and confirms settings.
• CONJUNT D'ALARMES: Views and sets alarm times.
• ALARMA ON / OFF: Activates or deactivates alarms.
• DORMITAR: Activates snooze function when alarm sounds.
• AMUNT AVALL: Adjusts values during setting.
• °C/°F: Toggles temperature unit between Celsius and Fahrenheit.
• ONADA: Controls DCF radio signal reception.

4. Configuració

4.1 Instal·lació de la bateria

1. Obriu la tapa del compartiment de les piles a la part posterior del rellotge.
2. Insert two AA batteries (not included) according to the polarity indicators (+/-).
3. Tanqueu bé la tapa del compartiment de la bateria.

4.2 Initial Power-On and DCF Signal

Upon battery installation, the clock will power on. If you are in Germany, the clock will automatically attempt to receive the DCF radio signal for time synchronization. This process may take several minutes. A signal icon will flash during reception and become solid upon successful synchronization.

If you are outside Germany or prefer manual time setting, you must disable the DCF function.

4.3 Disabling DCF (Outside Germany)

To disable the DCF function, press and hold the 'WAVE' button until the DCF signal icon disappears from the display. This allows for manual time and date setting.

5. Instruccions de funcionament

5.1 Configuració de l'hora i la data

1. Press and hold the 'SET' button for approximately 3 seconds to enter time setting mode. The hour digit will flash.
2. Feu servir els botons "AMUNT" o "AVALL" per ajustar l'hora.
3. Press 'SET' to confirm the hour and move to setting the minutes.
4. Repeat steps 2 and 3 for minutes, year, month, day, and 12/24 hour format.
5. Premeu 'SET' de nou per sortir del mode de configuració.

5.2 Configuració d'alarmes

El rellotge té dues alarmes independents (Alarma 1 i Alarma 2).

1. Press the 'ALARM SET' button briefly to view Alarm 1 time. Press it again to view Alarma 2 temps.
2. Mentre viewing the desired alarm time (e.g., Alarm 1), press and hold 'ALARM SET' for 3 seconds to enter alarm setting mode. The alarm hour digit will flash.
3. Use the 'UP' or 'DOWN' buttons to adjust the alarm hour.
4. Press 'ALARM SET' to confirm the hour and move to setting the alarm minutes.
5. Repeat steps 3 and 4 for alarm minutes.
6. Press 'ALARM SET' again to exit alarm setting mode.

5.3 Activació/desactivació d'alarmes

After setting an alarm, press the 'ALARM ON/OFF' button briefly to toggle the alarm on or off. An alarm icon (e.g., bell symbol) will appear on the display when the alarm is active.

5.4 Funció de repetició

When an alarm sounds, press the 'SNOOZE' button to temporarily silence the alarm. The alarm will sound again after approximately 5-10 minutes. To stop the alarm completely, press any other button.

5.5 Selecció de la unitat de temperatura

Press the '°C/°F' button to switch the indoor temperature display between Celsius and Fahrenheit.

5.6 Moon Phase Display

The moon phase is automatically calculated and displayed based on the set date. No manual adjustment is required for this feature.

5.7 Funció de temporitzador

The product description indicates a timer function. For specific instructions on how to operate the timer, please refer to the detailed product manual provided with your purchase, as specific button sequences are not available here.

6. Manteniment

6.1 Neteja

Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.

6.2 Substitució de la bateria

When the display dims or functions become erratic, it is time to replace the batteries. Open the battery compartment, remove the old batteries, and insert two new AA batteries, ensuring correct polarity. Dispose of old batteries responsibly.

7. Solució De Problemes

• Sense pantalla / Pantalla apagada:
  Check battery installation. Ensure batteries are inserted with correct polarity. Replace batteries if they are old or depleted.
• Hora incorrecta:
  If in Germany, ensure the DCF function is enabled and the clock is in a location with good signal reception. If outside Germany, ensure the DCF function is disabled and manually set the time and date as per section 5.1.
• L'alarma no sona:
  Verify that the alarm is activated (check for the alarm icon on the display). Ensure the alarm time is set correctly.
• DCF Synchronization Failure:
  Move the clock to a different location, preferably near a window and away from electronic devices that may cause interference. If persistent, disable DCF and set the time manually.

8. Especificacions

9. Garantia i Suport

For product support, warranty information, or service inquiries, please contact the retailer from whom you purchased the RC FanJu FJ3530 Digital Alarm Clock. Keep your purchase receipt as proof of purchase for any warranty claims.