Introducció
Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.
Producte acabatview
The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.
Imatge: Frontal view of the Lepro Remote Controller.
Funcions del botó de control remot
Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.
- Botons ON/OFF: Power on or off the LED strip light.
- 60S OFF Button: Activates a 60-second auto-off timer.
- Brightness +/- Buttons: Ajusteu el nivell de brillantor de la llum.
- WW (Warm White) Button: Sets the light to a warm white color temperature.
- NW (Neutral White) Button: Sets the light to a neutral white color temperature.
- DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
- Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
- Botó MODE: Cycles through fast/slow flash modes.
- Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.
Configuració
Instal·lació de la bateria
The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.
Image: Illustration showing how to remove the insulation sheet from the battery compartment.
- Localitzeu el compartiment de la bateria a la part posterior del comandament a distància.
- Pull out the plastic insulation sheet if it is present.
- If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
- Tanqueu la tapa de la bateria amb seguretat.
Pairing (If Applicable)
This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.
Instruccions de funcionament
Once the battery is installed, you can begin controlling your LED strip light.
- Encès/apagat: Premeu el botó ON botó per encendre el llum i el OFF per desactivar-lo.
- Ajust de brillantor: Utilitza el Brillantor +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
- Selecció de temperatura de color:
- Premeu WW for Warm White.
- Premeu NW for Neutral White.
- Premeu DW for Daylight White (Cool White).
Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.
- Fine-tuning Color Temperature: Utilitza el Temperatura de color +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
- Modes de flaix: Premeu el botó MODE button to cycle through different fast/slow flash modes.
- Modes d'escena: Select pre-set scenes using the dedicated buttons:
- Morning Scene: (Sunrise icon)
- Evening Scene: (Sunset icon)
- Escena nocturna: (Moon and stars icon)
- 60-Second Auto Off: Premeu el botó 60S DESACTIVAT button to activate a timer that will turn off the light after 60 seconds.
Manteniment
Neteja
To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.
Canvi de bateria
If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.
Nota: Eliminar les bateries usades de manera responsable d'acord amb la normativa local.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Remote not responding to light strip. |
|
|
| Rang de control limitat. |
|
|
Especificacions
- Model: 500014
- Marca: Lepros
- Dimensions del producte: 8.5 x 4 x 0.7 cm
- Pes: 20 g
- Bateria: 1 bateria de liti metàl·lic (obligatòria)
- Tecnologia de connectivitat: Ràdio Freqüència (RF)
- Interval màxim: 10 metres
- Nombre de botons: 14
- Dispositius compatibles: Lepro LED Strip Light 410098, LED Strip Light 410049
Informació important
Reciclatge de bombetes
For information on recycling this product and other types of lamps, please consult local recycling guidelines and facilities.
Informació de trencament i neteja de bombetes
In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.
Garantia i Suport
Per obtenir informació sobre la garantia i l'atenció al client, consulteu la pàgina oficial de Lepro. weblloc web o contacteu amb el vostre distribuïdor. Conserveu el rebut de compra com a comprovant de compra.
Per a més ajuda, podeu visitar el Botiga Lepro a Amazon.
